#1
|
||||
|
||||
fitzgerald is a big lie
hi to all
fitzgerald product are a big lie and expensive.I've prepared a product of Fitzgerald.pdf-1000 See all circuit in picture.Made up of 3 pieces crystal osilator 5 coils and 2 ic. Output measured with osiloscop. Signal amplitude was changed from 0 to 5v.target id is A key useless. Did not make any changes in the signal.telescopic antenna is a toy with frq (under vlf frq) pdf-1000 is a toy no lrl
__________________
Knowledge is the greatest wealth
|
#2
|
||||
|
||||
Quote:
|
#3
|
||||
|
||||
__________________
Knowledge is the greatest wealth
|
#4
|
|||
|
|||
What frequencies does he use?
|
#5
|
||||
|
||||
__________________
Knowledge is the greatest wealth
|
#6
|
||||
|
||||
was coil antenna :it is correct??????
Do you think it is practical?
__________________
Knowledge is the greatest wealth
|
#7
|
||||
|
||||
Here's a photo of the PDF 1000 LRL ->
http://www.treasurenow.com/html/PDF-1000-Large.html and what do you see at the bottom? ... a pair of dowsing rods. You should have kept your money in the bank, unless you enjoyed getting your expensive education. Here's a dead giveaway that's it's a fake: "Exclusive features found only on the PDF-1000 allow you to quickly set-up and search an area for up to 10 miles in all directions and 200 feet in depth." They're having a laugh! |
#8
|
||||
|
||||
IMAGINE THAT!
An EE that lies about their product. What a revelation. Forget the schematics, the question is, does it work as advertised. What do your field tests show? Dell
__________________
"WHAT HAS BEEN DONE, CAN BE DONE"
|
#9
|
||||
|
||||
Quote:
Just some perboard, a 555 timer circuit copied from the datasheet, lots of hot glue, and a vivid imagination. |
#10
|
|||
|
|||
I don't know your exact location, but this is a ballpark number
183.94 Hz for gold Conditions have not been real good for me today. It's been off and on. |
#11
|
||||
|
||||
__________________
Knowledge is the greatest wealth
|
#12
|
|||
|
|||
You know, I hate to call B.S. here but I really doubt those are Fitz's frequencies. Just looking a the advertisement, it says it is accurate to 1/10,000 of a Hertz. No way he would be using whole numbers, so something is not right here.
|
#13
|
||||
|
||||
I do not know
__________________
Knowledge is the greatest wealth
|
#14
|
|||
|
|||
Yeah, that's right. You put it on an oscilloscope but you don't know.
|
#15
|
|||
|
|||
Maybe something is lost in translation here. You should be able to hook up a frequency counter or check the frequency with the oscilloscope. If you got 100Hz, 150Hz, 200Hz, I can tell you something must be wrong with the device.
|
#16
|
||||
|
||||
What EE?
|
#17
|
||||
|
||||
It's called "not understanding what PPM means."
|
#18
|
|||
|
|||
Ah Carl, good to see you back. How was your trip to Tahiti Or wherever you were? At least the forum has skeptic that knows SOMETHING about LRL's. Or am I stretching things?
Yes, I now realize he was trying to copy the Vector Trek design and failed. I think the guy's name is Neil Pagal or something like that. It's definitely an older construction with the crystal oscillators. No, I have little electronics knowledge. If I get your take on the parts per million you're saying the accuracy cannot be that good especially if you start in the MHz range. I'm not ready to call them liars because I am not qualified. |
#19
|
|||
|
|||
So if you start with five parts per million that is one part per 200,000 and that is 1/1,000 at 200Hz. You'd have to get down to 20 Hz before you get 1/10,000 Hz accuracy. Since I don't know what freq they use, it is possible they get that accuracy. But that is assuming the freq divider is perfectly accurate. Not likely.
|
#20
|
||||
|
||||
The PDF-1000 is a Vector Trek model made by Neil Pagal. Fitzgerald is just the peddler. I own a PDF-1000 but don't have the design details here in front of me.
The crystals are probably 100ppm which is pretty common. Someone who doesn't know what that means might claim an accuracy of 1/10,000 Hz but that only works if the output is 1 Hz. The "doesn't know what that means" only gets worse from there. |
#21
|
||||
|
||||
Carl, just a reminder of your past. You know as well as I do, that every time you look in the mirror you see the reflection of an EE that has proven himself to be a chronic LIAR.
As long as I am alive I will serve as that reminder. Randi, is busted, you are alone in your cover-ups now. There is still time for your apologies. I wonder how much you pay your puppet moderator to perpetuate your lies and deception. I can only feel sorry for Qiaozhi, for his mis-placed loyalty to you. Dell
__________________
"WHAT HAS BEEN DONE, CAN BE DONE"
|
#22
|
||||
|
||||
Quote:
On the other hand, I am happy to assist and encourage experimenters in their efforts to produce an all-electronic LRL. Their efforts may eventually come to nothing, but as Thomas Edison has been quoted as saying: "I have not failed. I've just found 10,000 ways that won't work.” As a reminder of your own past: Your efforts over the last 30+ years have also been a failure. Unfortunately you've not yet recognised that as a fact. |
#23
|
|||
|
|||
Edison was a thief and dishonest. Ask Tesla. He had nothing good to say about him. As I recall he said his methods were like finds a needle in a haystack by removing every last piece of hay. Of course he didn't do that. He had helpers do all the work.
I don't like trying to convince skeptics about LRL's. I use them and they work. It takes lots of time and some form of meditation to gain your focus on your body response. As one guy put it, there are about 50 micro tesla's and the nano tesla's have to be picked out from the background noise. The human body can do this. I've also read some animals can be taught to have the magnetic sense. Maybe humans need to be taught also. Probably better said as taught to be aware of it. As for the Vector Trek, never seen one other than the photos. I have to assume they would not put something out on the market that did not work. Maybe the 1/10,000 Hz comment was a stretch, but even 1/1000 Hz at 200 Hz is very accurate. Sounds like Mr. Ubram did not get it copied correctly. Possible the frequencies need to be programmed, I don't know. I'm sure Carl could help on this. |
#24
|
||||
|
||||
I'd love to ask Tesla a lot of questions. Unfortunately he died in 1943.
That's a very naive assumption. |
#25
|
||||
|
||||
You would then have to assume the same thing for the calculator-on-a-stick thingy.
|
|
|