Lrl from Italy - Page 8

FrancoItaly · #**176** 02-22-2014, 03:34 PM

I think all no ferrous metals, but I have experience only with a brass bullet

mustefa ubram · #**177** 02-22-2014, 04:23 PM

TANK VERY MUCH FRANCO
You are a great engineer
BEST WISH DAER

Fred · #**178** 02-22-2014, 09:21 PM

Ok, but i have never seen a serious report about what it really does and how...

Quote:

Originally Posted by Nicolas

Hi Fred

It's a more sensitive than normal telescopic antenna .I have said this before

Here I not speak about Franco LRL. just I mean the coil for franco LRL with ferite Core.

Again not have build the Franco LRL.

For exepriences: I have already made my experience since 3 years. For the full range of my LRL's that I produce and sell.

Nicolas · #**179** 02-22-2014, 11:31 PM

Quote:

Originally Posted by Fred

Ok, but i have never seen a serious report about what it really does and how...

That were not see it .. it is not my fault, my dear brother

See my old Comments

http://www.longrangelocators.com/for...d=1#post143946

I've set a goal has been his my LRL's at a depth of 1.80 m and 600 m in the tomb ...

Gold coins and silver at the mention or Bronze

I've forgotten now ... but they exist...

HOBBIT · #**180** 02-24-2014, 07:26 AM

hi to all

construct lrl Franco and I but do not know how to adjust to being very sensitive, putting his hand on the horn grabbed by 2-3 cm, is correct that this distance must be more sensitive;
Thank you all.

FrancoItaly · #**181** 02-24-2014, 11:04 AM

Hi HOBBIT
Tune P1 for about 3Mhz, tune P2 for about 1-6V (AC signal) at point X and at pin2 (phase comparator output) a DC signal 0.5-6V. This is not a metal detector and hand tests serve little. As I said and I repeat here there is no other way to test the lrls, you must have a long buried metal that is in same place at least a few months (for my experience) or to know a place where there is surely a long buried metal. An empirical system is exploiting the compass effect, you need to adjust the gain towards the maximum sensitivity until you have the compass effect then you have to lower the gain until it disappears. This happens with my lrl.
Best Regards

king40 · #**182** 02-24-2014, 11:08 AM

Quote:

Originally Posted by HOBBIT

hi to all

construct lrl Franco and I but do not know how to adjust to being very sensitive, putting his hand on the horn grabbed by 2-3 cm, is correct that this distance must be more sensitive;
Thank you all.

Hi
you must have old buried gold or silver in your field test

Nicolas · #**183** 02-24-2014, 02:27 PM

Quote:

Originally Posted by HOBBIT

hi to all

construct lrl Franco and I but do not know how to adjust to being very sensitive, putting his hand on the horn grabbed by 2-3 cm, is correct that this distance must be more sensitive;
Thank you all.

test in buried metal my friend not for fresh metal

mustefa ubram · #**184** 02-27-2014, 10:39 AM

hi
franco I built your lrl
Please guide for getting started.(my frq is 2.8mhz*pot2 set on 6vp-p* led on -off with pot 3)

Please guide?
best wish

FrancoItaly · #**185** 02-27-2014, 11:04 AM

Hi mustefa ubram

I repeat here what I said to Hobbit, "you must have a long buried metal that is in same place at least a few months (for my experience) or to know a place where there is surely a long buried metal. An empirical system is exploiting the compass effect, you need to adjust the gain towards the maximum sensitivity until you have the compass effect then you have to lower the gain until it disappears. This happens with my lrl."

Best Regards

Nicolas · #**186** 02-27-2014, 12:37 PM

Hi Mustefa Nice work
We waiting you test now. and your news.

Good luck

mustefa ubram · #**187** 02-27-2014, 04:29 PM

tank you franco and nicolas
the lrl Reacts to mobile phone radiation.In your opinion, is this acceptable?

FrancoItaly · #**188** 02-27-2014, 04:45 PM

Hi mustefa ubram
I don't know if it's important, I have no tried, but I think that the Lrl is ok.
Best Regards

mustefa ubram · #**189** 02-27-2014, 07:15 PM

franco What are the duties L1 C10 C11 ?
is this circuit postive detector?

FrancoItaly · #**190** 02-28-2014, 10:47 AM

Hi mustefa ubram
I can only say that the phenomenon changes amplitude and phase of the amplifier stage.
Best Regards

roccocoin · #**191** 03-04-2014, 07:09 AM

Quote:

Originally Posted by mustefa ubram

NEW VERSION PCB OF LRL FRANCO 6CM*5CM

mustefa hello, I want to ask you a favor, since you've already made the PCB francoitaly I could put the photo in black and white of the printed circuit? I am from Italy as frank I have already contacted him directly, but he told me that he just makes patterns pen and I do not understand nulla.tank

nelson · #**192** 03-04-2014, 12:08 PM

Dear friend

Has i know all LRL divices detects electromagnetics signals from many sources.
Yesterday for example i was experimenting to know what PDK and Crypton OBMD 2 can detect. So for that i try to see if this devices can detect a quarz watch, and yes both detected this small signal. Al so a 1.5 battery, a small tv set are detected. So far i think that the clue is to try the answer from Franco and this is to test the detector on a site where you know there is silver or gold buried from long time (years)

Regards

Nelson

Quote:

Originally Posted by mustefa ubram

tank you franco and nicolas
the lrl Reacts to mobile phone radiation.In your opinion, is this acceptable?

roccocoin · #**193** 03-04-2014, 12:35 PM

Quote:

Originally Posted by nelson

Dear friend

Has i know all LRL divices detects electromagnetics signals from many sources.
Yesterday for example i was experimenting to know what PDK and Crypton OBMD 2 can detect. So for that i try to see if this devices can detect a quarz watch, and yes both detected this small signal. Al so a 1.5 battery, a small tv set are detected. So far i think that the clue is to try the answer from Franco and this is to test the detector on a site where you know there is silver or gold buried from long time (years)

Regards

Nelson

Yes, ok, but I asked for a copy of the electronic board in black and white to be able to do francoitaly and since mustefa already made it like I asked ... mustefa all here to test it then I got it.

mustefa ubram · #**194** 03-06-2014, 07:38 AM

my lrl is ready.But I have not an old metal buried for testing

Do not Know

Nicolas · #**195** 03-06-2014, 04:00 PM

Quote:

Originally Posted by mustefa ubram

my lrl is ready.But I have not an old metal buried for testing

Do not Know

Hi Mustefa nice sensor Antenas

mustefa ubram · #**196** 03-06-2014, 04:59 PM

Quote:

Originally Posted by Nicolas

Hi Mustefa nice sensor Antenas

tank you dear nicolas.but i dont know for start

Nicolas · #**197** 03-06-2014, 05:54 PM

Quote:

Originally Posted by mustefa ubram

tank you dear nicolas.but i dont know for start

Prove it in media or you think there's fled the metals .. or many treasures and see how that works this Machine
Certainly you will understand my friend.

I am busy on a lrl working with a PIR
Good wishs for you and all

Morgan · #**198** 03-06-2014, 07:37 PM

Quote:

Originally Posted by mustefa ubram

my lrl is ready.But I have not an old metal buried for testing

Do not Know

i thought maybe if the box is made of wood it would be better...

mustefa ubram · #**199** 03-06-2014, 08:08 PM

Quote:

Originally Posted by Morgan

i thought maybe if the box is made of wood it would be better...

morgan i Made with Teflon.it is good.
morgan my lrl Responds to mobile signals.Your opinion is right?

Morgan · #**200** 03-07-2014, 12:52 AM

Quote:

Originally Posted by mustefa ubram

morgan i Made with Teflon.it is good.
morgan my lrl Responds to mobile signals.Your opinion is right?

Hi

react to the mobile signals only means your LRL is working, PDKs,MINERO etc also react to mobiles ,however you need to try your locator in the fields, and when you get a clear signal,not dig,until you finish all the tests that you need to know about performance,DISTANCE,AIR HUMIDITY etc etc

good luck