Dowsing Rod for 2012

[kostas87]

Originally Posted by Geo

Hi Kosta.
Χρονια πολλα.
You tried this LRL. It is not for everyone, they must know about dowsing so to work with it.

Regards

Are you saying I'm not good dowsing!χεχεχε..!! : Razz:

καλη χρονια γιωργο, να εισαι παντα καλα!!!

[WM6]

Originally Posted by jack

tank you dear geo
Please answer the questions raised in the image?

Hi jack,

why you do not use this Tesla's patent in reverse mean?

[jack]

Originally Posted by WM6

Hi jack,

why you do not use this Tesla's patent in reverse mean?

hi dear wm6
What is this circuit?

[Geo]

Originally Posted by kostas87

Are you saying I'm not good dowsing!χεχεχε..!! : Razz:

καλη χρονια γιωργο, να εισαι παντα καλα!!!

Kalh Xronia.
Θα τα πουμε συντομα.

Regards

[Geo]

Originally Posted by jack

tank you dear geo
Please answer the questions raised in the image?

At my prototype the hand is connected to antenna via handle and bearings, there is not insulalation.

[indiana jones]

Here's my latest project for a friend . A telephone generator.
Can work signal boosted by the amplifier, or simply as dowsing.

The amplified signal comes in a transformer and comes in antenna numbers 2 and 3.
Simple signal go to antenna 1.

3 antennas can move left or right and give us sound.
When found target.

[teknoloji]

Originally Posted by J_Player

Some basic principles of dowsing
(This works for dowsing with a stick, or with electronic MFD dowsing):

1. Dowsing works.
Anybody can dowse.
Simply take dowsing rods in your hands and walk around and watch for when the rods cross together or do not cross together.
Or watch for when the rod points to various different directions.
Then you have accomplished dowsing.

2. Dowsing is successful for finding buried treasures only for some people.
The people who are successful at dowsing do not tell lies.
They really are successful.

3. A successful dowser will find success only when nobody else is watching them, or when other successful dowsers are watching.
If a person who is not successful with dowsing is watching, then the dowsing ability will stop working for the successful dowsers.

4. A successful dowser will not be successful if a person is watching who does not believe they are successful.
If you set up a test for them to find which of the 10 plates you hide the gold or silver coin under, they will not find the correct plate better than guessing.
This is part of #3 principle where they will lose their dowsing power when a person who is not successful with dowsing is watching.

5. A successful dowser will always pass a dowsing test, maybe 100% success if nobody else is watching.

So what to say?
Dowsing works.
Really.


Best wishes,
J_P

I completely agree with you.
belong on this dimension with the relevant people to recognize him.

Regards

[apogonos]

Originally Posted by Geo

Hi.
I will show a new dowsing rod.
This uses a simple signal generator with variable frequency from 3.5 to 70 Hz.
With this you can locate caves, gold, copper etc.
The schematic is very simple (only 2 IC's and one transistor) and you can construct it on the pcb that i will attach here or at a general purpose pcb.
continued...

Geo happy new year to you,
very nice rod, it would not have a Frequency Counter on the rod?

[Geo]

Originally Posted by apogonos

Geo happy new year to you,
very nice rod, it would not have a Frequency Counter on the rod?

Hi Takis
Happy New Year, kalh xronia poy leme
If you see carefully the box, you will see 2 small bronze pins (from upper side). These pins are for frequency measuring


Regards

[jack]

hi dear geo
Can the 4017 output of an amplifier more powerful than the metals used to Sense?
Can you design a circuit that will alarm when the metal was Sense?

[Geo]

Hi Jack.
I can't understand your first question

[jack]

Originally Posted by Geo

Hi Jack.
I can't understand your first question

Is it possible that the output IC for Better Sense of metals was further strengthened?(Using a more powerful signal booster?)
Can you design a circuit that will alarm when the metal was Sense?

[apogonos]

Originally Posted by Geo

Hi.
I will show a new dowsing rod.
This uses a simple signal generator with variable frequency from 3.5 to 70 Hz.
With this you can locate caves, gold, copper etc.
The schematic is very simple (only 2 IC's and one transistor) and you can construct it on the pcb that i will attach here or at a general purpose pcb.
continued...

Originally Posted by Geo

Hi Takis
Happy New Year, kalh xronia poy leme
If you see carefully the box, you will see 2 small bronze pins (from upper side). These pins are for frequency measuring


Regards

I think I put a Frequency Counter, from ebay : http://www.ebay.com/itm/9999Hz-LED-D...item35af3f9a6d

[Geo]

About your first question.... No reason for more power. When you will "learn" it you will understand me.
About second question.... i work on it with good results for begining, but i will not give it out.

Regards

[Geo]

Originally Posted by apogonos

I think I put a Frequency Counter, from ebay : http://www.ebay.com/itm/9999Hz-LED-D...item35af3f9a6d

If you construct it then you can put a counter at 555 output.
I don't need it because i marked the potentiometer knob

[apogonos]

σωστό

[jack]

Originally Posted by Geo

About your first question.... No reason for more power. When you will "learn" it you will understand me.
About second question.... i work on it with good results for begining, but i will not give it out.

Regards

Geo's
I did not get the answer to Question 2

[goldfinder]

Originally Posted by Geo

If you construct it then you can put a counter at 555 output.
I don't need it because i marked the potentiometer knob

If you are relying on the 555 to stay on frequency then you are operating without exact frequencies.

The 555 use capacitors and a resitor to control the frequency. The capacitors change values slightly in different temperatures which results in frequency drift. You need to periodically check the frequency as the tuning will drift all over for the original setting. This is especially true in warmer weather. So if your electronic dowsing is dependent on an accurate stable frequency 555s are NOT the answer.

I have done hundreds of tests in the field and quit using 555s for and kind of stable frequency generator. I use a PIC microcontroller to generate frequencies and they are extremely stable.
Goldfinder

[Geo]

Originally Posted by goldfinder

If you are relying on the 555 to stay on frequency then you are operating without exact frequencies.

The 555 use capacitors and a resitor to control the frequency. The capacitors change values slightly in different temperatures which results in frequency drift. You need to periodically check the frequency as the tuning will drift all over for the original setting. This is especially true in warmer weather. So if your electronic dowsing is dependent on an accurate stable frequency 555s are NOT the answer.

I have done hundreds of tests in the field and quit using 555s for and kind of stable frequency generator. I use a PIC microcontroller to generate frequencies and they are extremely stable.
Goldfinder

This is the reason that i have Test Points at the 555 output

[Geo]

Originally Posted by jack

Geo's
I did not get the answer to Question 2

Read #114

[jack]

One way to balance lrod

[WM6]

Originally Posted by jack

One way to balance lrod

Brilliant jack.

Now we only need to balance Earth.

[epitopios]

Hello Geo and a Happy New Year from here too , and to all (and not) LRLs
is this something like that :
http://i.imgur.com/0yoEK.jpg
or like this :
http://i.imgur.com/f8gHS.jpg
very good in Targets , You are right to insist !!!
and good luck to....everybody.
friendly , epitopios

[Geo]

Originally Posted by epitopios

Hello Geo and a Happy New Year from here too , and to all (and not) LRLs
is this something like that :
http://i.imgur.com/0yoEK.jpg
or like this :
http://i.imgur.com/f8gHS.jpg
very good in Targets , You are right to insist !!!
and good luck to....everybody.
friendly , epitopios

Hi Panos.
Nothing is same with photos. I put here all schematic, pcb and photos, nothing secret.

Regards

[iron1944]

Dear G-Sani
Longrangelocators forum schematic drawing to show for the eletronic Dowsing Rod promised.
Waiting.
Yours sincerely.