Lrl from Italy - Page 122

Basellafe · #**3026** 06-07-2023, 10:27 AM

By touching antinna the volt decrease about 100ml so in this device maybe work right or not that is the only test you recommend and the field

FrancoItaly · #**3027** 06-07-2023, 10:37 AM

Quote:

Originally Posted by Basellafe

By touching antinna the volt decrease about 100ml so in this device maybe work right or not that is the only test you recommend and the field

Yes.

Basellafe · #**3028** 06-10-2023, 06:48 AM

https://youtube.com/shorts/omaGfzihxQE?feature=share3

FrancoItaly · #**3029** 06-10-2023, 10:09 AM

Quote:

Originally Posted by Basellafe

https://youtube.com/shorts/omaGfzihxQE?feature=share3

The fact that there is a strong signal inside the house proves that all the electronics of the lrl are working properly but as I always say the most important test is outdoors.

Yusufyaba · #**3030** 06-11-2023, 10:06 AM

mr franco
Do you have any field test video or home environment test video available? I couldn't see it.
detailed how it reacts to which object or how it reacts to electronic devices.
How about sending a detailed video?

FrancoItaly · #**3031** 06-11-2023, 10:44 AM

Quote:

Originally Posted by Yusufyaba

mr franco
Do you have any field test video or home environment test video available? I couldn't see it.
detailed how it reacts to which object or how it reacts to electronic devices.
How about sending a detailed video?

I have no video, the only well done (that I know of) is this:

https://www.youtube.com/watch?v=yR3tzT2Jd-g&t=32s

However as I said the tests inside the house are of little importance.

Sneshko · #**3032** 06-12-2023, 10:58 AM

Quote:

Originally Posted by Yusufyaba

mr franco
Do you have any field test video or home environment test video available? I couldn't see it.
detailed how it reacts to which object or how it reacts to electronic devices.
How about sending a detailed video?

Dear Yusufyaba, you see here:

https://youtu.be/iuNZ_oSeZwE

and..

https://youtu.be/5CwQJBPe3jo

Regards!
Sneshko

Yusufyaba · #**3033** 06-12-2023, 07:25 PM

Thank you very much .
These videos are enough. I think there's an electric field there that's sensitive to it.
I tried in the past, but since I don't have a test area, it was garbage for me

Do you think finding the electric field or seeing the static energy on a plastic bag is equivalent to finding a buried object?

FrancoItaly · #**3034** 06-13-2023, 10:26 AM

I don't think there is a valid way to simulate the phenomenon, however my lrl is not sensitive to static fields, as it should have a very high impedance.

Basellafe · #**3035** 06-23-2023, 09:16 AM

On a copper kettle https://youtube.com/shorts/qeNcy54KjdA?feature=share3

Pahom · #**3036** 06-23-2023, 09:47 AM

[/QUOTE]You will have to wait at least two months and the signal capture distance will increase. Congrats on the device!!!!!!!!!!!

Basellafe · #**3037** 06-23-2023, 12:59 PM

Thanks poham iwant to ask you if there is a metal in box how it will be the device response

Pahom · #**3038** 06-23-2023, 01:24 PM

Quote:

Originally Posted by Basellafe

Thanks poham iwant to ask you if there is a metal in box how it will be the device response

It all depends on interference. If there is a lot of their interference, then it is better to shield the case.

Basellafe · #**3039** 06-23-2023, 05:14 PM

Thanks again pohram idont mean the device isheild the device but i mean if there is a treasure in abox of metal is this device can detect it

Pahom · #**3040** 06-23-2023, 05:54 PM

Quote:

Originally Posted by Basellafe

Thanks again pohram idont mean the device isheild the device but i mean if there is a treasure in abox of metal is this device can detect it

Only a search will give you the answer. I have not had such cases. Franco wrote to you, and other participants, and the builders of this device more than once, only a real search on rough terrain will give you answers to all questions, like depth, distance and metals found by the device. And everyone has different results. My result is 1 meter and no more than 10 cm of large aluminum objects in the northeast direction. I didn?t make the case at all, just the top layer of the copper board when I did the experiments. So only a real search will give you answers. A friend of mine from Iran is very pleased with the 4046 circuit with a ferrite antenna tuned to 200kHz. He digs all the signals, everything comes across, especially very old rusty knives, nails, but next to him very often, checking with a metal detector, he finds small silver items. So just search. The road will be mastered by the walking good luck to you !!!!!!!!!!

Babak Ruby · #**3041** 06-26-2023, 04:12 PM

Hi Franco, what do you think if we add an RF oscillator with a frequency of kHz and a suitable bandwidth to the mixer?

FrancoItaly · #**3042** 06-27-2023, 10:17 AM

Quote:

Originally Posted by Babak Ruby

Hi Franco, what do you think if we add an RF oscillator with a frequency of kHz and a suitable bandwidth to the mixer?

My attempts with a lower frequency (62 Khz) have not been successful, probably a ferrite antenna is needed, tuned with the oscillator.

fasdoc · #**3043** 06-28-2023, 04:58 PM

Hi Mr Franco, congratulations for your work, I can't read the new display stage PDF , it's open a picture like blurry colors. If it is not hard I'd like to upload it again, or if you know how to see the PDF normally, also I have the same problem with the 20mhz file, it looks like a color blured picture.
Finally, I read everything from 2013 until today and you can write a book with it. Congratulations again for your patience with all the opposite opinions for your work.
You are not alone to this journey and a big thanks!

fasdoc · #**3044** 06-28-2023, 06:20 PM

I have fix it, my PDF reader wasn't ok,

FrancoItaly · #**3045** 06-29-2023, 10:28 AM

Quote:

Originally Posted by fasdoc

I have fix it, my PDF reader wasn't ok,

The 20 Mhz lrl is more sensitive than the 8 Mhz lrl as L1/C10 is tuned to a 20 Mhz harmonic, however it is more difficult to implement. A test that could be done is to increase the frequency of the quartz, from 8 Mhz to 10 Mhz (or 12 Mhz) and increase L1, from 3 to 4 (or 5) turns and use a variable capacitor instead of C10, possibly putting a capacitor in parallel.

FrancoItaly · #**3046** 06-29-2023, 10:31 AM

Quote:

Originally Posted by fasdoc

Hi Mr Franco, congratulations for your work, I can't read the new display stage PDF , it's open a picture like blurry colors. If it is not hard I'd like to upload it again, or if you know how to see the PDF normally, also I have the same problem with the 20mhz file, it looks like a color blured picture.
Finally, I read everything from 2013 until today and you can write a book with it. Congratulations again for your patience with all the opposite opinions for your work.
You are not alone to this journey and a big thanks!

Thanks for the compliments, I hope you made the original version and it works well.