LongRangeLocators Forums  

Go Back   LongRangeLocators Forums > Main Forums > Long Range Locators

Reply
 
Thread Tools Display Modes
  #1  
Old 10-31-2017, 11:14 PM
Dubulumach Dubulumach is offline
Guru
 
Join Date: Oct 2017
Posts: 283
Default ICONOS-MD IC807 ONLY GOLD ©

The new iconos-md IC 807 model ONLY GOLD, MODEL 2007 year




Scientific facts

Between any two points on the surface of the earth, there generally exists a difference in electrical potential, commonly measured in volts (or, millivolts). There are two natural 'grounds' (natural sources that can absorb or supply more charge than humans can generate). One is the ionosphere, where ionized gasses conduct electricity, and the other is the earth (hence, the origin of the term "ground"), where ions in soil moisture and ground water conduct electricity. There exists a tremendous potential difference between these grounds, a difference maintained by the atmosphere (an insulator). Because the air is not a perfect insulator, a slight electrical current slowly flows through the air, resulting in a near-surface gradient of several hundred volts/meter. Below we describe the basic geophysical phenomena associated with Long range Metal detection.

Firstly, Spontaneous Potential. This phenomenon is a natural north-south flow of electrical current, driven by the dynamics of the ionosphere, and generates what we call TELLURIC electrical currents. Since the earth is a good (but not a perfect) conductor, Ohm's Law implies a pattern of potential differences due to this current between buried objects and the surrounding soil.

Secondly, Electrochemical potential which is generated by the ground battery phenomenon of metals .This happens when buried metals come into contact with the soil, or from metals in contact with ground water and ions migrate from the metal to the soil. This effect results in anomalies above the ground - interesting variations of static fields in an otherwise dull, uninteresting earth atmosphere. It is such variations, or anomalies, that we seek which form around buried GOLD and other noble metals after many years. The resulting chemical reaction makes the metals act much like a large battery. By detecting this strong phenomenon and discriminating the different static fields we can find the buried objects from large distances.

So using the above scientific facts we confirm, that long time buried metals and especially noble metals like Gold, form electrochemical and spontaneous potential phenomena, in the immediate vicinity of the object, and above the ground also which extends many meters away from the object . The intensity and radius of this static field increases with time. The buried object must be buried at least 15 years, in order to form this static field, and it reaches maximum intensity after 40 years. So in practice the buried metal behaves as a ground battery and ions migrate from it’s surface to the surrounding minerals in the soil (read above Electrochemical potential )In this case the electrolyte is the soil itself. The more the soil is moist, so much faster the phenomenon appears. This same phenomenon has been proved with conventional metal detectors also, in a small scale. Freshly buried objects are detected, only when the disk is directly over the target. However when the object has been buried for many years, then the detector signals it’s presence from a larger distance and it can detect it deeper than the freshly buried object. (also called the halo effect)

Our detectors are the first in the world to be able to detect buried metals without using ground electrodes but can detect the spontaneous potential and electrochemical potential phenomena from long distances due to our revolutionary electronic Gold sensor. They also discriminate the electrochemical spontaneous potentials associated only with long time buried Gold from large distances. Thus you can scan large open areas in a small period of time and be sure to find the treasure.!!!!!

The Detector
The iconos-md detectors after 12 years of research and development constitute the new generation of metal detectors, clearly electronic, that can detect the Spontaneous and Electrochemical Potential phenomena from long distances thanks to their revolutionary systems. They are many times more sensitive than conventional metal detectors and this is achieved by using advanced electronics circuitry and also, our revolutionary new invention electronic sensor designed only for gold which detects the phenomena through electrochemical and spontaneous static fields. The result of this detection with our special sensor is the creation of peak signals in the region of millivolts or picovolts when a potential target is detected.. This signal has a unique signature which is compared electronically in the sensor circuitry, and signals ONLY FOR GOLD.

Revolutionary New generation Gold Sensor

The closer we get to the buried object the more the signal intensifies, because the static field peaks over the buried object. The signal reaches climax only when we are on top of the object, thus leading us exactly to the location of the treasure precisely. The generated static field is not circular in form but elliptical in shape due to deformation which is influenced by the magnetic field of the earth and the telluric currents, which have a North to South direction, through the magnetic lines in the North-South axis. The range of detection of the iconos-md detectors is dependant on the emanating static field diameter, but from research this range can extend to distances of hundreds of meters for a given target.

The new generation of iconos-md detectors, have been manufactured exclusively for the detection of gold through static fields which are created from the Electrochemical potential and Spontaneous Potential phenomena, over very large distances. Maximum distance of detection therefore, is always in the North-South direction. Also the distance depends on how long the object has been buried in the ground and does not depend on the mass of the gold object. It is possible however that large quantities of gold may be detected in less than 15 years. In this case the detection is achieved, because of the large quantity of ions, which generate the phenomenon and form the static fields more intensely and faster than smaller objects. With the iconos-md Long Distance Gold detectors you can be certain that you will locate the buried gold with precision from long distances.

Specifications

Model Long range Gold Detector - iconos-md IC 807
Accessories Suitcase - CD with instructions
Detection system - Electronic Sensor detector ESD
Power Source - 4 x 9 volts alkaline batteries.
Size - Length 21cm - Width 13cm - Height 27cm with handle.
Metals to Detect - Only Gold
Warranty - 3 years

https://web.archive.org/web/20071011...onos-md.eu:80/
Reply With Quote
  #2  
Old 10-31-2017, 11:17 PM
Dubulumach Dubulumach is offline
Guru
 
Join Date: Oct 2017
Posts: 283
Default

Friends - any schematic, pcb, making instructions about ICONOS-MD IC807 ONLY GOLD ?

BOEM987@GMAIL.COM

thanks
Reply With Quote
  #3  
Old 11-02-2017, 06:46 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Search forum for DCH85 schematic.
It is a clone of it.
__________________
Geo
Reply With Quote
  #4  
Old 11-04-2017, 02:18 AM
Dubulumach Dubulumach is offline
Guru
 
Join Date: Oct 2017
Posts: 283
Default

Quote:
Originally Posted by Geo View Post
Search forum for DCH85 schematic.
It is a clone of it.
Thank you, but you said both doesn't work and detect only electrostatic fields, but I need working LRL for GOLD not for power lined 470kV.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.