![]() |
|
#1
|
|||
|
|||
![]()
Here's one you can try. Place pistol locator on a table or whatever so the coil is facing upwards. Wait five to ten minutes then circle it with an L-rod. Look for a response when you are in line with your target. Or you might try to just pick up the locator and aim at your target, see if you get a response after you have charged the target field. Usually the signal line will remain for a couple minutes. Now I've never tried this since I don't own a pistol locator. It might be you get a sky response, in which case this won't work. So the other way would be to point it at your target and just wait for five minutes. i suppose your arm will get tired so maybe you can set it on a chair or something. This is just an experiment to try . Don't know what results you will get.
|
#2
|
|||
|
|||
![]()
My whole whole point here is these pistol locators just not right. The idea you can point it at a target and get a response is a big misunderstanding about how the frequency discriminators work. It almost always takes a few minutes for the line to develop. So the idea of pointing the locator straight up is to charge the entire area then quickly do a scan. Like i said i don't even know if this will work with your locator, but it seems to work with what i am using. So it might be worth a try.
|
#3
|
|||
|
|||
![]() |
#4
|
|||
|
|||
![]()
I don't get this post? If you are referring to all my joint disorders from using a metal detector (and wild life style), I don't have the money for surgery. The cancewr surgeries have taken everything I've made in the past few years. Just have to live with it and walk carefully.
|
#5
|
|||
|
|||
![]()
And the idea is that maybe if you do hit a traget, by keeping the locator pointed at it, you will maintain the target field's energy. With an L-rod people say they can get a response for two to three minutes after they turn off power, but with the electronic locator, it will likely be much less time. So, that's my theory for today.
![]() ![]() |
#6
|
|||
|
|||
![]()
Probably be better to aim the pistol down instead of up so the circuit board is not blocking the signal. I don't know if this will work or not.
|
#7
|
||||
|
||||
![]()
I fully agree with your thinking....
|
![]() |
|
|