LongRangeLocators Forums  

Go Back   LongRangeLocators Forums > Main Forums > All-Electronic LRLs

Reply
 
Thread Tools Display Modes
  #1  
Old 05-03-2016, 01:53 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default vlf

www.mwlist.org/vlf.php
Reply With Quote
  #2  
Old 05-03-2016, 08:10 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Very interesting site.

Thanks
__________________
Geo
Reply With Quote
  #3  
Old 05-03-2016, 09:50 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

Yeah, the trick is to find a station that is operating consistently. Of course they all shut down for maintenance from time to time but there is something I haven't figured out on some of the stations that would appear to have a strong signal and yet they seem to be on the blink. I read about it somewhere they go out of phase in various areas surprisingly sometimes if they are nearby but I don't think there is any way to calculate which station will work consistently other than to try it out, and even then there are no guarantees, but that just shows that i don't know. .
Reply With Quote
  #4  
Old 05-03-2016, 09:59 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

And I'm not even talking about atmospheric conditions.
Reply With Quote
  #5  
Old 05-05-2016, 04:27 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

I have a SuperSID monitor. It comes with software but I like the Spectrum Labs because you can get finer detail. I guess it depends on what wave band you are working in, but for the VLF below about 45 kHz you can see what is happening in your area. Now maybe there is other software for higher frequencies, I don't know.
Reply With Quote
  #6  
Old 05-08-2016, 11:47 PM
daryo's Avatar
daryo daryo is offline
Junior Member
 
Join Date: Feb 2012
Posts: 26
Default 30 hz

Quote:
Originally Posted by Mike(Mont) View Post

can you tell me : is the range of 30hz frequency good for treasure hunting ?(by metal detector-EM or any type of LRLs )
if used and will be good , what is it advantage from higher range of frecuency ?(20 khz)
if not ,where is used this range ? (which applications)
you know vlf means very low frequency , this is start from khz or hz ?
thank you
Reply With Quote
  #7  
Old 05-09-2016, 04:02 AM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

Sorry, I am not qualified to give any advice for you. There are some projects on the forum and they can help you.
Reply With Quote
  #8  
Old 05-09-2016, 06:31 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

I probably didn't explain this very well. If you do not know what you are doing it is best to build a project that has already been tested and shown to work. Some frequencies do not work in certain areas.
Reply With Quote
  #9  
Old 05-09-2016, 08:33 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by daryo View Post
can you tell me : is the range of 30hz frequency good for treasure hunting ?(by metal detector-EM or any type of LRLs )
if used and will be good , what is it advantage from higher range of frecuency ?(20 khz)
if not ,where is used this range ? (which applications)
you know vlf means very low frequency , this is start from khz or hz ?
thank you
Using 30Hz as working frequency, you will face with interference problems of mains power line (60Hz in USA 50Hz in EU).

Above 20kHz skin effect phenomenon begin.

VLF range is between 3kHz and 30kHz.

Probably you need ULF (range between 300Hz and 3kHz), then try with frequencies between 600 and 800Hz and simple Wheatstone bridge solutions.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #10  
Old 05-10-2016, 02:47 PM
daryo's Avatar
daryo daryo is offline
Junior Member
 
Join Date: Feb 2012
Posts: 26
Default freq

Quote:
Originally Posted by Mike(Mont) View Post
Sorry, I am not qualified to give any advice for you. There are some projects on the forum and they can help you.
thank you

Quote:
Originally Posted by Mike(Mont) View Post
I probably didn't explain this very well. If you do not know what you are doing it is best to build a project that has already been tested and shown to work. Some frequencies do not work in certain areas.
thanks , one of my friends told me about a device that can work at range of 30hz to 20khz frequency ,but i did not know what is it means really but i think frequency not is everything while looking for ancient metals

Quote:
Originally Posted by WM6 View Post
Using 30Hz as working frequency, you will face with interference problems of mains power line (60Hz in USA 50Hz in EU).

Above 20kHz skin effect phenomenon begin.

VLF range is between 3kHz and 30kHz.

Probably you need ULF (range between 300Hz and 3kHz), then try with frequencies between 600 and 800Hz and simple Wheatstone bridge solutions.
thank you so much ,i did not know the frequency is different at countries and some of them not working at other countries , i was thinking to find a proper range of frequency for finding ancient gold ,but maybe never have success by my opinion about find freq
Reply With Quote
  #11  
Old 05-10-2016, 03:50 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

Yeah, a 10 kHz - 30 kHz receiver is supposed to work in conjunction with the AM radio band. This is along the lines of the Gold Gun but I have no experience with that design. I think some of the designs on the forum are similar to the Gold Gun. As I recall you can get about 100 feet range (30 meters) on a large target or ore body if you have an AM radio station nearby.
Reply With Quote
  #12  
Old 05-10-2016, 07:51 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Gold Gun is one of rare LRL design posted on this forum with real detecting potential.
Not on kilometers, but on decent detecting distance.

Probably there are a couple reasons why builders are not satisfied with GG results.
One is bad tunning procedure. Another one, even more important, is wrong detecting approach.

GG working in reflective mode should never be directed to signal source (transmitter) but always at 90° angle regarding signal source direction:

__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #13  
Old 05-11-2016, 06:18 AM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

I do not agree that the target creates a reflection. It is an emission at a different frequency that creates a magnetic field around the target.
Reply With Quote
  #14  
Old 05-11-2016, 08:54 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

When we talk about "magnetic field" zone, we talk about near field region of coil (or antenna), in fact reactive part of near field, where primary changeable magnetic field (magnetic induction) act. Reactive part of near field is effective region of metal detectors, and, as we know, pretty limited in effective distance.

All other field (after transition zone) is far field, where magnetic induction caused by changeable magnetic field, disappear. In far field region we can count only on resonance or on reflexion.

To get resonance with target at 30kHz (about GG working frequency) we need substantial part of Lambda (wavelength - which is here about 10km). At 30kHz we can get useful resonance (mean: re-radiated energy) with objects like underground cables, metallic pipes and alike. A hoard of coins, golden statue, etc. cannot resonate at such big wavelength.

So, using GG to detect something at say 5m, forget on magnetic field (magnetic induction) and forget on resonance. The only way is reflexive way (as per drawing above).

Without understanding how coil (which is sort of radiating antenna) works in near and far field region, proper use of devices like GG is impossible:

https://www.osha.gov/SLTC/radiofrequ...omagnetic.html
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #15  
Old 05-11-2016, 02:48 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

The magnetic field that develops around the target acts like a loudspeaker but this is not instantaneous.
Reply With Quote
  #16  
Old 05-11-2016, 09:37 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Mike(Mont) View Post
The magnetic field that develops around the target acts like a loudspeaker but this is not instantaneous.
In reactive near field region - mean in region of conventional metal detector, where magnetic induction happen.

If you need known comparison it works like transformer (so: TX coil as transformer primary windings, eddy current induced in target as secondary windings and RX coil as second secondary windings which sense targets eddy current load). In reactive near field region is is all about magnetic induction. All magnetic induction phenomenon can be presented as transformer equivalent.

But GG work is not based on magnetic induction, it is based on radio wave transmission - something different.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #17  
Old 05-12-2016, 01:47 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

Yeah, you are f'ing clueless.
Reply With Quote
  #18  
Old 05-12-2016, 04:02 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

They say you can tell when a lawyer is lying--whenever his lips are moving. I heard the other day 70% of everything that people post on the internet is false. If you can't dazzle them with brilliance, baffle them with B.S. No, this isn't a joke.
Reply With Quote
  #19  
Old 05-13-2016, 02:01 PM
Carl-NC's Avatar
Carl-NC Carl-NC is offline
Administrator
 
Join Date: Feb 2005
Location: Oregon
Posts: 889
Default

Quote:
Originally Posted by Mike(Mont) View Post
Yeah, you are f'ing clueless.
Mike, what if WM6 is completely right?
Reply With Quote
  #20  
Old 05-13-2016, 03:05 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

First off, I don't believe anyone's identity on the forums. I've said this before I think about half the posters are just one or two skeptics and all their alias identities. Whatever the case, he would be contradicting himself. First he says no LRL can possibly work then he says the Gold Gun works after I mention it. Then on another thread he praises some frequency generator on a swivel handle--well, that's got to be sarcasm. The skeptic way is such a waste of a good mind. Something really bothers me about skeptics. I really want to help them, but I know some things are near to impossible. So I have to ask the question "Why are they here?" It's not for the good of mankind. It's gotta be some personal motive and we all have heard "follow the money". Most people are here because they love LRL's. The root of the word amateur, amo amare, means to love. As fora skeptic being right when they claim no LRL can possibly work, well all I can say is B.S.
Reply With Quote
  #21  
Old 05-13-2016, 04:25 PM
FrancoItaly FrancoItaly is offline
Guru
 
Join Date: Feb 2006
Location: Liguria, Italy
Posts: 1,371
Default

I agree with Mike, this forum is open to all and rightly so, but I feel wrong and unjust that a member would arrogate to himself the right to judge what is true and what is false, confusing those who approach the forum for the first time and calling liars or, at best, dreamers other forum members. Certainly there are also economic interests in the LRLs world, people who use the forum as a showcase, but I hope that the members of this forum are able to judge well.
Reply With Quote
  #22  
Old 05-13-2016, 06:04 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Mike(Mont) View Post

First he says no LRL can possibly work then he says the Gold Gun works after I mention it.
You should read more carefully. There was no "after I mention it". You can read different old thread here, where I, not only once, long ago, promote Gold Gun possibilities to detect at some longer distance than metal detectors and propose members to build it. Certainly GG cannot detect something at kilometers nor even couple of 10 meters. Properly build, tuned and used, GG can work as simplified (known and patented long ago) pipe locater (pretty deep on bigger target). If such locater is for someone LRL, then it is LRL. I left this clasification to others. In comparison to mineoros, rangertell etc. crap, GG is real LRL, cause all those commercial creations are all anti-LRL.

Reading members questions and their private massages asking about different electronic module solution I only trying to help with simple electronic design, to answer such question and to give members some ideas to play with electronic. I never argued such proposal as working LRL (maybe sometimes when we are joking - to not be to serious through life).

Quote:
Originally Posted by FrancoItaly View Post

but I feel wrong and unjust that a member would arrogate to himself the right to judge what is true and what is false,
Franco, I feel wrong too, when someone of LRL believers take to himself right to judge what is true and what is false, without proper argumentation and refusing to accept simple technical explanation.

To be believer, does not mean that: faith=right.

If someone is blind believer, those are blind for possible way to real LRL too. So be real and cooperate with everyone willingly to cooperate, no matter skeptic or believer.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #23  
Old 05-13-2016, 06:21 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,107
Default

Like I said , take away the B.S. and there ain't nothing left...
Reply With Quote
  #24  
Old 05-14-2016, 01:50 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Mike(Mont) View Post
Like I said , take away the B.S. and there ain't nothing left...
I am sorry, if you feel so with your projects.

Anyway, don't lost hope, maybe someday you got insight instead of constant out-sight.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #25  
Old 05-14-2016, 10:21 AM
FrancoItaly FrancoItaly is offline
Guru
 
Join Date: Feb 2006
Location: Liguria, Italy
Posts: 1,371
Default

Hi WM6,

The situation is this: I and other members have built LRL and affirm that work, You've built no LRL and claims that can not work and then we fail or are dreamers. Now I ask you, there are things that science still does not know or can not explain?

Best regards
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 09:11 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.