LongRangeLocators Forums  

Go Back   LongRangeLocators Forums > Main Forums > Dowsing & Passive Locators

Reply
 
Thread Tools Display Modes
  #1  
Old 01-15-2022, 01:25 AM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default Tuned dowsing rods

This is an old site, not sure if it is still active.

http://www.precisiondowsing.com/index.htm
Reply With Quote
  #2  
Old 01-15-2022, 07:20 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Very good, it works.

Mike thanks
__________________
Geo
Reply With Quote
  #3  
Old 01-15-2022, 02:09 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

I don't understand the reasoning of the length of the coil being 32 times the diameter?
Reply With Quote
  #4  
Old 01-15-2022, 04:01 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

The original info I got had 32x but I see now it says wire length is 64 x the length of the center core conductor.
Reply With Quote
  #5  
Old 01-16-2022, 06:56 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Quote:
Originally Posted by Mike(Mont) View Post
I don't understand the reasoning of the length of the coil being 32 times the diameter?
Me too....
__________________
Geo
Reply With Quote
  #6  
Old 01-16-2022, 02:29 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

Been thinking about these rods and I don't see much need for pure copper. I found some 3/16" x .014" (4.76 mm x .355 mm) brass tubing and some 5/32" (3.96 mm) brass rod for the handle. I have some thin magnet wire don't know the gauge but it's thin, maybe too thin to work with, but it would be much lighter weight. Probably will not be able to match his 64x.
Reply With Quote
  #7  
Old 01-16-2022, 04:15 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

You know very good that if you have the dowsing then no need for any mod on rods
__________________
Geo
Reply With Quote
  #8  
Old 01-16-2022, 07:06 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

He claims experienced dowsers can get better results. I don't know, he throws a lot of terms out there to confuse the buyer. LOL Just by extrapolation I come up with about 1200 turns on the brass tubing. I plan to use an electric drill to wind it and just guess about how many turns per inch. I don't have a clue what frequency he is trying to get for a given magnetic field strength. I come up with about 18 meters for 54000 field strength. Apporximately 18 meter half-wave dipole is for 8.3 MHz. What is that? I sure don't know.

BTW, I had an old Fred Stewart rod had a coil of wire on the rod near the handle.

This thing is probably a big waste of time. LOL
Reply With Quote
  #9  
Old 01-17-2022, 03:10 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Quote:
Originally Posted by Mike(Mont) View Post
He claims experienced dowsers can get better results. I don't know, he throws a lot of terms out there to confuse the buyer. LOL Just by extrapolation I come up with about 1200 turns on the brass tubing. I plan to use an electric drill to wind it and just guess about how many turns per inch. I don't have a clue what frequency he is trying to get for a given magnetic field strength. I come up with about 18 meters for 54000 field strength. Apporximately 18 meter half-wave dipole is for 8.3 MHz. What is that? I sure don't know.

BTW, I had an old Fred Stewart rod had a coil of wire on the rod near the handle.

This thing is probably a big waste of time. LOL
I am sure that you have better ways to spend your time!!
__________________
Geo
Reply With Quote
  #10  
Old 01-18-2022, 03:20 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

One thing I gleaned from this webpage has to do with rod length. He says rod length between 6.5" - 13.75" (16.5 cm - 35 cm) and magnetic field strength between 23,000 - 60,000. When I figure for my field strength 54130, it comes out to approximately (in my head without calculating) rod length just under 13" (33 Cm). This is almost exactly what I have been using for rod length and I have a feeling that this is an important parameter. I have never seen it mentioned that there is a correlation between rod length and magnetic field strength.
Reply With Quote
  #11  
Old 01-18-2022, 04:23 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

At my city the magnetic field strength is near to 46000 and the rods that i use are near to 45cm, farfrom 33cm that the webpage says!!!
__________________
Geo
Reply With Quote
  #12  
Old 01-18-2022, 05:24 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

Maybe that is why you do not like L-rods. LOL Just joking From what I calculate you should be using rod length 28 cm.
Reply With Quote
  #13  
Old 01-18-2022, 08:34 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

Actually that is the length of the coil not the entire rod. So I guess it does not match what I use, either.
Reply With Quote
  #14  
Old 01-23-2022, 08:16 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

I believe that if you are good at dowsing then you are good with any rod at any place.
__________________
Geo
Reply With Quote
  #15  
Old 01-23-2022, 03:04 PM
Mike(Mont) Mike(Mont) is offline
Guru
 
Join Date: May 2007
Posts: 2,105
Default

Yes, and on the other end of the scale someone who is a poor dowser even a good rod will not help much. My firm belief is people tend to psyche themselves out and think too much. I say pick a spot out in front of you a ways and look at it and don't think about the dowsing. It is essential to keep the conscious mind out of the way.

Like Hills says, a good carpenter can use most tools and get them to work but he cannot drill a one inch hole with a two inch bit.
Reply With Quote
  #16  
Old 01-27-2022, 07:35 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,921
Default

Quote:
Originally Posted by Mike(Mont) View Post
Yes, and on the other end of the scale someone who is a poor dowser even a good rod will not help much. My firm belief is people tend to psyche themselves out and think too much. I say pick a spot out in front of you a ways and look at it and don't think about the dowsing. It is essential to keep the conscious mind out of the way.

Like Hills says, a good carpenter can use most tools and get them to work but he cannot drill a one inch hole with a two inch bit.
Unless you're pretending not to see the hole bigger. It is a matter of psychology !!
__________________
Geo
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.