LongRangeLocators Forums  

Go Back   LongRangeLocators Forums > Main Forums > All-Electronic LRLs

Reply
 
Thread Tools Display Modes
  #1  
Old 03-14-2012, 07:23 PM
Seden Seden is offline
Senior Member
 
Join Date: Oct 2006
Posts: 246
Default Esteban was right!

Good citizens,

I was reading on the Photonics Newsletter today and scientists are using lasers to detect chemicals in boxes at over a 100 meters. Even inside walls detection is possible with lasers and at the end of the article it mentions using it for geological detection. Look here:

http://www.photonicsonline.com/artic...ource=nl:33421

Long distance Raman Spectroscopy,this is great.

Randy
Reply With Quote
  #2  
Old 03-14-2012, 10:26 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Seden View Post
Good citizens,

I was reading on the Photonics Newsletter today and scientists are using lasers to detect chemicals in boxes at over a 100 meters. Even inside walls detection is possible with lasers and at the end of the article it mentions using it for geological detection. Look here:

http://www.photonicsonline.com/artic...ource=nl:33421

Long distance Raman Spectroscopy,this is great.

Randy
Nothing new.

Look at this 7 years old stuff:

http://www.signonsandiego.com/uniont...n27detect.html
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #3  
Old 03-15-2012, 12:51 AM
Seden Seden is offline
Senior Member
 
Join Date: Oct 2006
Posts: 246
Default Almost true

Here's what IS new:
"
a new method has now been developed to detect chemicals inside a container over a distance of more than a hundred meters."

The 7 year article does not make that claim.

Randy
Reply With Quote
  #4  
Old 03-15-2012, 06:57 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

Some times when i said that i saw a laser lrl that had the ability to detect objects from 70m, some members here irony me. So maybe it is time to read again all the threads from begin.
Also i own a laser lrl.

Regards
__________________
Geo
Reply With Quote
  #5  
Old 03-15-2012, 10:40 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Geo View Post
Some times when i said that i saw a laser lrl that had the ability to detect objects from 70m, some members here irony me. So maybe it is time to read again all the threads from begin.
Also i own a laser lrl.

Regards
Geo, there is no need that something what is working fine in theory and some lab tests, work the same in real world of your needs.

If your laser LRL is Bionic, it is useless (and at the same time very expensive) box usable as toy only.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #6  
Old 03-15-2012, 11:06 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Seden View Post
Here's what IS new:
"
a new method has now been developed to detect chemicals inside a container over a distance of more than a hundred meters."

The 7 year article does not make that claim.

Randy
If it can be mounted even on aircraft, this mean from great distance and it can be understood by itself that all landmines are in "containers" and not in form of free bulk explosive.

"The machine also could be mounted on an armored vehicle, on a robot or aboard a small unmanned aircraft.
Tong hopes to develop an instrument that can detect explosives from 110 yards away .."


But main problem with laser spectral detecting small amount of molecules at distance in real world (out of clean lab atmosphere) is that with distance we get huge and uncontrollable amount of unwanted molecules in air which totally cover and eliminate wanted molecules from detection.
Attached Images
 
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #7  
Old 03-15-2012, 12:32 PM
nelson's Avatar
nelson nelson is offline
Guru
 
Join Date: Mar 2005
Posts: 466
Default

Hi WM6

I agree with you on this, but if the device can have some sourse of discrimination like notch on MD, may be you can set it to detect only explosives particles.

I also will like to know how smoke detector for example detects smoke particles and no more than smoke? Is clear that this device is made to work only with smoke, but can this be mod to work to detect other kind of particles?

Regards

Nelson


But main problem with laser spectral detecting small amount of molecules at distance in real world (out of clean lab atmosphere) is that with distance we get huge and uncontrollable amount of unwanted molecules in air which totally cover and eliminate wanted molecules from detection.[/QUOTE]
Reply With Quote
  #8  
Old 03-15-2012, 01:46 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by nelson View Post
Hi WM6

I agree with you on this, but if the device can have some sourse of discrimination like notch on MD, may be you can set it to detect only explosives particles.

I also will like to know how smoke detector for example detects smoke particles and no more than smoke? Is clear that this device is made to work only with smoke, but can this be mod to work to detect other kind of particles?

Regards
Yes, nelson, effectively it works like notch (of course with other technical solution) but notch we use in vicinity detectors and laser we tend to use as long range detectors.

Notch is usable in relatively clean soil. In soil full of different trash that cover wanted target signal, notch become completely unusable.

The same situation we get with laser at distance. We have 2 or 3 usable molecules at say 100m but before laser beam reach those molecules, beam hit billions of other trashy molecules in air, which give back totally mess of interference chaos and cover usable signals, if it was even created.

Smoke particles detector is another story, it cannot differentiate between different source of smoke.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #9  
Old 03-15-2012, 05:02 PM
Dedevil Dedevil is offline
Banned
 
Join Date: Oct 2011
Location: Hell
Posts: 262
Default Yes Estebans system workrd

But it is a difficult task to scan the earth with a laser beam the size of a head of a needle, it would take alot of swingig and you would probably end up spending any gold money on doctors fees to fix your sore elbow from swinging the laser around.
read more about it at http://www.nmp.csiro.au/ion.html
Estebans system was different and quite clever.
He modulated the laser output so the reflected wave is close to the modulated frequency, so you detect the reflected wave not the laser frequence.

rgds
Reply With Quote
  #10  
Old 03-15-2012, 05:27 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Dedevil View Post
But it is a difficult task to scan the earth with a laser beam the size of a head of a needle, it would take alot of swingig and you would probably end up spending any gold money on doctors fees to fix your sore elbow from swinging the laser around.
read more about it at http://www.nmp.csiro.au/ion.html
Estebans system was different and quite clever.
He modulated the laser output so the reflected wave is close to the modulated frequency, so you detect the reflected wave not the laser frequence.

rgds
Agree, Estebans system is working, but his system cannot detect nothing like gold or silver.

He pull the idea from laser spy microphone where voices modulate laser beam:

http://hacknmod.com/hack/how-to-long...ophone-spying/

Nice to play with such creation, but conceptually wrong and unusable in detecting things of value.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #11  
Old 03-15-2012, 08:17 PM
nelson's Avatar
nelson nelson is offline
Guru
 
Join Date: Mar 2005
Posts: 466
Default

I understand WM6, but it must be a way to split that molecules, like a filter to let pass only gold molecules.
Anyway it is a very interesting technology to investigate.
Talking about pdk, do you have a good VLF oscillator to build has a coil stimulator for PDK. I need an oscillator capable to generate VFL btw 110 to 180 Khz or around this spectrum

Regards
Nelson


Quote:
Originally Posted by WM6 View Post
Yes, nelson, effectively it works like notch (of course with other technical solution) but notch we use in vicinity detectors and laser we tend to use as long range detectors.

Notch is usable in relatively clean soil. In soil full of different trash that cover wanted target signal, notch become completely unusable.

The same situation we get with laser at distance. We have 2 or 3 usable molecules at say 100m but before laser beam reach those molecules, beam hit billions of other trashy molecules in air, which give back totally mess of interference chaos and cover usable signals, if it was even created.

Smoke particles detector is another story, it cannot differentiate between different source of smoke.
Reply With Quote
  #12  
Old 03-16-2012, 06:57 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

Quote:
Originally Posted by Dedevil View Post
But it is a difficult task to scan the earth with a laser beam the size of a head of a needle, it would take alot of swingig and you would probably end up spending any gold money on doctors fees to fix your sore elbow from swinging the laser around.

rgds
If you will try to detect the phenomenon then you don't need to do a lot of swinging. You must forget the theory with reflected signals.

Regards
__________________
Geo
Reply With Quote
  #13  
Old 03-16-2012, 10:38 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by nelson View Post

it must be a way to split that molecules,
Maybe you can filter out some 1000s of unwanted disturbing molecules at distance of 100cm by using DSP technique, but you cannot filter out many billions of such trashy molecules found at distance of 100m and sense there one or two "gold" (which one?) molecules. Don't forget signal strength decreases by square of the distance, mean useful signal of remote targets are very weak in comparison with trashy signal everywhere on beam path. Science fiction.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #14  
Old 03-17-2012, 12:11 AM
humhum's Avatar
humhum humhum is offline
Guru
 
Join Date: Aug 2007
Posts: 678
Default laser lrl

Quote:
Originally Posted by Geo View Post
Some times when i said that i saw a laser lrl that had the ability to detect objects from 70m, some members here irony me. So maybe it is time to read again all the threads from begin.
Also i own a laser lrl.

Regards

Hi Geo, can you post some photos from your laser lrl.
Reply With Quote
  #15  
Old 03-19-2012, 03:27 PM
Dedevil Dedevil is offline
Banned
 
Join Date: Oct 2011
Location: Hell
Posts: 262
Default Crap!

Quote:
Originally Posted by WM6 View Post
Agree, Estebans system is working, but his system cannot detect nothing like gold or silver.

He pull the idea from laser spy microphone where voices modulate laser beam:

http://hacknmod.com/hack/how-to-long...ophone-spying/

Nice to play with such creation, but conceptually wrong and unusable in detecting things of value.
Esteban's method has nothing to do with spy cameras. He used a modulated laser in the infared spectrum to transmit. And then detcted the bouncing back lower frequency modulating frequency. Discrimination is possible, but depth is very low due to the use of the IR laser for transmission. This is why i suggested using a MASER of a slightly lower frequency for transmission and then you may get depth and discrimination.

Please understand your technologies before posting quotes of "he is wrong" as you become and sound like a fool in front of everyone.

rgds
Reply With Quote
  #16  
Old 03-19-2012, 05:10 PM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Dedevil View Post
Esteban's method has nothing to do with spy cameras. He used a modulated laser in the infared spectrum to transmit. And then detcted the bouncing back lower frequency modulating frequency. Discrimination is possible, but depth is very low due to the use of the IR laser for transmission. This is why i suggested using a MASER of a slightly lower frequency for transmission and then you may get depth and discrimination.

Please understand your technologies before posting quotes of "he is wrong" as you become and sound like a fool in front of everyone.

rgds
You try first understand what I say and then comment. I know you cannot.

I am saying where primary idea was pulled out. And this was not from "spy cameras" - where did you find this (?), but laser spy microphone - a totally different things.

And yes, I can only repeat, Esteban is wrong in this case again and you do not understand either Esteban idea nor me.

Not only understand, You are not even capable of correct reading.

Scrap of hung personality make you faded.
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
  #17  
Old 04-04-2012, 09:04 PM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

Quote:
Originally Posted by humhum View Post
Hi Geo, can you post some photos from your laser lrl.

Hi.
Here is the first version of my laser detector. Final version has some mod's... but i have not photo from it
Attached Images
 
__________________
Geo
Reply With Quote
  #18  
Old 04-04-2012, 10:32 PM
Seden Seden is offline
Senior Member
 
Join Date: Oct 2006
Posts: 246
Default Esteban was right!

Geo,

That looks really good! I'm going to try a different tact by putting the primary leads of an audio transformer in series with the power lead of my laser and connect the secondary leads to an audio amplifier and see what is heard when scanning over various metals and minerals.

I think there is much latitude experimenting with lasers where before we have been using the electromagnetic methods for close to a century now to find metals and ores.

I sure hope Esteban gets better soon. I wish I had his email address so I could write him. If anyone talks with him please tell him Randy says hi.
Thanks.
Reply With Quote
  #19  
Old 04-05-2012, 03:53 AM
Seden Seden is offline
Senior Member
 
Join Date: Oct 2006
Posts: 246
Default Scratch that idea

I connected the laser diode up with the audio transformer and first looked at the output on a scope. The usual low level mains was there but noticed that I was getting pulses when moving the laser around on my wood table,a copper coin or other metal objects. So I then hooked up an audio amplifier to the transformer and found out that the laser diode module acted like a microphone when handled and when I moved it across the copper penny it made quick narrow pulses over the raised shapes,ditto on my needle nose pliers with its tiny grooves from being polished.

I'm sure that Esteban discovered this early on and found the better method of modulating the Laser with a square wave.
Reply With Quote
  #20  
Old 04-05-2012, 07:14 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

We must understand that when we speak about LRLs we speak for "phenomenon" detectors. We must forget anything about "normal" metal detectors. Every test closer to 50cm is wrong. So, at who distance far from laser you moved the coin???
Also repeated the test having the coin on a long wood rod, not at your hands.
I am interesting for your results.

Regards
__________________
Geo
Reply With Quote
  #21  
Old 04-06-2012, 12:45 AM
humhum's Avatar
humhum humhum is offline
Guru
 
Join Date: Aug 2007
Posts: 678
Default

Quote:
Originally Posted by Geo View Post
Hi.
Here is the first version of my laser detector. Final version has some mod's... but i have not photo from it

Geo, thanks for photo , you with this your IR Detector found anyone coin ?.




Regards.
Reply With Quote
  #22  
Old 04-06-2012, 01:04 AM
humhum's Avatar
humhum humhum is offline
Guru
 
Join Date: Aug 2007
Posts: 678
Default IR schematic

What thinks for this two schematics with patents



Fig.1 is for Detector with FM+IR for buried metal.








Fig.2 is Detector with IR and photo diode

Reply With Quote
  #23  
Old 04-06-2012, 06:22 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

Quote:
Originally Posted by humhum View Post
Geo, thanks for photo , you with this your IR Detector found anyone coin ?.




Regards.
Hi.
I did not find any coin. I took signals only over ancient tombs from 10m distance. It works near to 400 Mhz and has a red laser module.
__________________
Geo
Reply With Quote
  #24  
Old 04-06-2012, 06:23 AM
Geo's Avatar
Geo Geo is offline
Guru
 
Join Date: Mar 2005
Location: Greece
Posts: 3,920
Default

Quote:
Originally Posted by humhum View Post
What thinks for this two schematics with patents



Fig.1 is for Detector with FM+IR for buried metal.








Fig.2 is Detector with IR and photo diode

Can you give me the pattent number, so to read it and to say my opinion??
__________________
Geo
Reply With Quote
  #25  
Old 04-06-2012, 09:18 AM
WM6's Avatar
WM6 WM6 is offline
Guru
 
Join Date: Nov 2007
Location: Borovnica, Slovenia
Posts: 2,392
Default

Quote:
Originally Posted by Geo View Post

Can you give me the pattent number, so to read it and to say my opinion??
http://www.freepatentsonline.com/7288927.pdf
__________________
Global capital is ruining your life?
You have right to self-defence!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 12:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.