Project KING LRL V4.1

[Nicolas]

Hi all, after the success of my LRL finally I share my project so that you can understand the mode of operation and do some ideas

For those who want to build it. The hex file is shopping

For requesting the Hex file contact me on my email

ridha.nick@gmail.com

[jocelito]

you have the pcb for the project?
need people with dowsing for the operation of the machine?

[Nicolas]

Originally Posted by jocelito

you have the pcb for the project?
need people with dowsing for the operation of the machine?

Hi my dear this is not dowsing..you are wrong my dear

This device is Electronic LRL. Cand detect metal buried only buried from distance 2 Km this is real and depth 20 m

this device not PDK or PD or

the device not work if not have Firmeware and not to be cloned
my device it's simple to build look the scheme ..I make it simple . Only the microcontroller make all

comparator / identification / oscillator / frequencemetre / transmitter / receiver and other options

[jocelito]

ok Nicolas

[DrTech]

Originally Posted by Nicolas

Hi my dear this is not dowsing..you are wrong my dear

This device is Electronic LRL. Cand detect metal buried only buried from distance 2 Km this is real and depth 20 m

this device not PDK or PD or

the device not work if not have Firmeware and not to be cloned
my device it's simple to build look the scheme ..I make it simple . Only the microcontroller make all

comparator / identification / oscillator / frequencemetre / transmitter / receiver and other options

and the field test? video where you find gold......

[ouiarabe]

Originally Posted by Nicolas

Hi my dear this is not dowsing..you are wrong my dear

This device is Electronic LRL. Cand detect metal buried only buried from distance 2 Km this is real and depth 20 m

this device not PDK or PD or

the device not work if not have Firmeware and not to be cloned
my device it's simple to build look the scheme ..I make it simple . Only the microcontroller make all

comparator / identification / oscillator / frequencemetre / transmitter / receiver and other options

[SIZE="<font><font>4</font></font>"]hi
thank you very much for this sharing Professor Nicolas
a question, please the MCLR microcontroller is connected to GND through a push button and the other is connected to VDD through a resistor R11: 10K, what is the proper setup
thank you in advance
[/SIZE]

[Nicolas]

Originally Posted by ouiarabe

[SIZE="<font><font>4</font></font>"]hi
thank you very much for this sharing Professor Nicolas
a question, please the MCLR microcontroller is connected to GND through a push button and the other is connected to VDD through a resistor R11: 10K, what is the proper setup
thank you in advance
[/SIZE]

Yes you are right my dear friend ouiarbe I m forget it.

thank you for this attention

look here I have add the connection

[Nicolas]

Originally Posted by DrTech

and the field test? video where you find gold......

That I not have my dear

I'm waiting for you to build my LRL and find Gold and make us Good Video

Look here in forum you find that is in 2012.

[Fred]

Originally Posted by Nicolas

This device is Electronic LRL. Cand detect metal buried only buried from distance 2 Km this is real and depth 20 m

Nicolas,
At the beginning your scientific and electronic approach to the LRL end PD experiments was looking technical, impartial and interesting.
Then, probably having to answer so many questions from credulous people,you progressively fell into the dark side.
Too bad, you have now reached Hung´s level

I suppose all electronic LRL experimenters, after confronted to the inevitable failure, falls into two categories: The ones that admits it simply doesn´t work, and the others, that need to find some subterfuge, and convert their non-working electronic LRL into a disguised dowsing device, relying on selective memory to feel happy, and eventually scam people.

[Nicolas]

Originally Posted by Fred

Nicolas,
At the beginning your scientific and electronic approach to the LRL end PD experiments was looking technical, impartial and interesting.
Then, probably having to answer so many questions from credulous people,you progressively fell into the dark side.
Too bad, you have now reached Hung´s level

I suppose all electronic LRL experimenters, after confronted to the inevitable failure, falls into two categories: The ones that admits it simply doesn´t work, and the others, that need to find some subterfuge, and convert their non-working electronic LRL into a disguised dowsing device, relying on selective memory to feel happy, and eventually scam people.

MAYBE my friend but you are wrong dear...

I have 3 years build this LRL and test it and and exprimenté in land area and anywhere so people that want to exprimentation
I am an expert in the field in the first place and also a researcher treasure for 28 years I'm not young or started me today to make the treasure hunt but in 1986 I built my first VLF detector .

I know all the stuff LRL market and also they make people and society my friend.

I know what people think and say so . I am not interrested them.
My principle is to test my LRL with your methods and with their hands. and how you want?
Finally here is the circuit before you, quite sour for this connoisseur field.
made the build and give your judgment.

for me I sold 50 aircraft . I had problem with 3 people per betises transport only. No other claims and that because of people's trust in me
I sell on the internet or in my country.

look here the first and the latest
look here the first and the last. You can understand what LRL's this.







For questions very sure I answer all here the same to my email
but there's the questions I do not want to answer. and that it is my right
no need to say why ....

if you accept and respect me thank you. if you do not believe do not build and do not buy.
and remains in compliance with my friend. this a forum to share our expertise. nobody takes responsibility and does not require any person to build a circuit or to buy a machine. only one gives advised to after our experiences and this can be true or false. we do not know the people here.

[ouiarabe]

Originally Posted by Nicolas

Yes you are right my dear friend ouiarbe I m forget it.

thank you for this attention

look here I have add the connection

[SIZE="<font><font>6</font></font>"]Thank you very much for the clarification sir
[/SIZE]

[king40]

Good Work Nic

[Fred]

I just expressed my opinion Nicolas, because we both know what is happening here.

[Nicolas]

Originally Posted by Fred

I just expressed my opinion Nicolas, because we both know what is happening here.

Hi Dear Fred yes I know it
Welcome my dear not by offense. me too I expressed my opinion.

thanks

[Nicolas]

My New LRL A41 in phase final

[Nicolas]

ٍVideo Test in Turkey

http://www.youtube.com/watch?v=krSWoye-8_I

[ozanmelih]

Hi nicolas... I saw the test in youtube. İs it successfull? Which city of Turkey in this test happened? How do i connect with them? When will you be in Turkey?

[Nicolas]

Originally Posted by ozanmelih

Hi nicolas... I saw the test in youtube. İs it successfull? Which city of Turkey in this test happened? How do i connect with them? When will you be in Turkey?

Contact me I give you information

[ouiarabe]

Originally Posted by Nicolas

ٍVideo Test in Turkey

http://www.youtube.com/watch?v=krSWoye-8_I

Congratulations my friend for this success

[ozanmelih]

Originally Posted by Nicolas

Contact me I give you information

ozanmelih@hotmail.com I live in Istanbul. My gsm number is 0530 384 18 67

[ozanmelih]

Originally Posted by Nicolas

Contact me I give you information

I cant send you privste message...

[Nicolas]

Hi all

Here you find all files update to built this real working KING LRL V41

The firmware is not free . For take the microcontroller with Hex file contact me

Note: I not send or give the Hex file by Internet

Thanks to understanding

http://www.kounooz.com/up/do.php?id=2375

[Sneshko]

Dear Nicolas!
Thank you very much for project King LRL V4.1!
What is the price the Hex file for King v.4.1?
Please reply me on my E-mail address:

sneshko2010@gmail.com

Thank you in advance for your answer!
Regards!

[dsltrip]

Hi nicolas

i also want to ask you the price only for the Hex file
and the price if you bulit one for me King LRL V4.1 .
My email is
dsltrip@gmail.com
thanks

[Nicolas]

Hi all

I put here the Gerber files to work on CNC

For preview need open it with this program GC_Preview

http://www.graphicode.com/download/GC-Prevue

Good wishes for all