ALONSO PD MISSION ACCOMPLISHED V1,V2

[humhum]

Hi Morgan , What Frequency Band use for Stimulator Generator Hz or Khz ??

[Morgan]

Originally Posted by Morgan

the Alonso PD use the metal detector circuit HeatKit, its a TR/IB sistem, according Esteban a BFO with cristal controler is the best for stability, I want to try but the cristal is hard to find...

here schematic

the faraday shield in the coil no need

[Morgan]

Originally Posted by humhum

Hi Morgan , What Frequency Band use for Stimulator Generator Hz or Khz ??

the PDK-3 is in Hz

[Morgan]

Originally Posted by abdou2014

this is my first experience with DCH circuit , without TDA stable and work, detect switch spark

but not yet successful with the TDA, maybe there is an error in the circuit ????

one important thing about the DCH85, if you make the antenna correctly, it will locate your hand energy and a plate of metal near the antenna, if not, it means no power to locate the PHENOMENON

[abdou2014]

Thank you, how far should it react to hand and metals to the coil ?
should this test be with or without the stimulator ?

[Morgan]

Originally Posted by abdou2014

Thank you, how far should it react to hand and metals to the coil ?
should this test be with or without the stimulator ?

I talk about model using TDA and no TDA, it need to catch the hand energy in front of the antenna , it can be 1cm is fine, more is much better.

[humhum]

Originally Posted by Morgan

the PDK-3 is in Hz

Ok Dear Friend , I understand .

[humhum]

Originally Posted by Morgan

I talk about model using TDA and no TDA, it need to catch the hand energy in front of the antenna , it can be 1cm is fine, more is much better.

When build my first PD before many Years , it can catch hand Energy from around 1 meter,
I build it with Sch of Tarsus Detector + Passive Ferrite Detector , but OSC be not stabil or Fix and make freq shift , needs adjust for 1-3 minute .

http://www.longrangelocators.com/for...=13895&page=11

[abdou2014]

always under construction

[abdou2014]

is pin 13 of the TDA connected to an antenna or not ?

in which frequency range should we search via variable capacitor ?

Thank you !

[humhum]

Originally Posted by abdou2014

is pin 13 of the TDA connected to an antenna or not ?

in which frequency range should we search via variable capacitor ?

Thank you !

You can modified from this Sch of 7000

[Pahom]

Originally Posted by humhum

You can modified from this Sch of 7000

Goodnight. Do you recommend selecting capacitors for narrowband FM?

[Morgan]

Originally Posted by humhum

When build my first PD before many Years , it can catch hand Energy from around 1 meter,
I build it with Sch of Tarsus Detector + Passive Ferrite Detector , but OSC be not stabil or Fix and make freq shift , needs adjust for 1-3 minute .

http://www.longrangelocators.com/for...=13895&page=11

no limits for electronic devices, soon it will be new LRL technologies

[Morgan]

Originally Posted by abdou2014

is pin 13 of the TDA connected to an antenna or not ?

in which frequency range should we search via variable capacitor ?

Thank you !

yes, it is the 13 the antenna pin. but I see Esteban put CV1 (adustable capacitor ) 10-20pf, that cant pick targets,need 10-70pf, most PDK-3 I built pick the gold with 56pf value...

[Morgan]

Originally Posted by abdou2014

is pin 13 of the TDA connected to an antenna or not ?

in which frequency range should we search via variable capacitor ?

Thank you !

this is the TDA , I use and it works fine :

I believe it can bring all the DCH85 from the deads to a living form,if its correctly tuned...

[abdou2014]

Thank you for your help Mr Morgan, is only one antenna sufficient like photo 1, or it is necessary two antennas like 2 ???

[abdou2014]

with the stimulator it is uncontrollable, I do not have in my diagram where I can reduce the sensitivity to stabilize it, it is very important ???

[abdou2014]

Now there are three configurations ?????

[humhum]

Originally Posted by Morgan

no limits for electronic devices, soon it will be new LRL technologies

Yes , so like my High Voltage option , and also with White Noise technologie ...
But with correct info and Building .

[humhum]

Morgan , I think that , if your input is from pin 17 , 18 ,(instead 13) can be get the same result .
here are important others subtleties or details .

[Morgan]

Originally Posted by abdou2014

Now there are three configurations ?????

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

[Morgan]

Originally Posted by abdou2014

Now there are three configurations ?????

is this your DCH85 , or using other model?

[Morgan]

Originally Posted by Morgan

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

correction, antenna in C23 to the 220pf ,remove the antenna and connect the radio to upgrade the DCH, no needc the transformer that you see in Esteban?s schematic.

[Farid]

Hello Mr. Morgan
Do you sell Alonso PD?
I'm willing to buy it from you for $ 20,000.
I bought the Isaac PD and I am satisfied with it.
I would also like to buy the original Alonso device.
You say the PD project is an old project and it's better not to talk about it.
If so, it's best to sell it to me.
I'll give you $ 20,000 for Alonso PD.

[abdou2014]

Originally Posted by Morgan

no, forget this LRLs, they use diferent antennas,

you need to adapt this radio to your DCH85 project and see for field results, simply connect to the frewquency capacitor 220N receiver in the original antenna place (old model with no radio),and use in the pin 13(in the radio) the antenna with the sample ,not the loop 56pf(this is my other project).

A question, did you already try your DCH85 in a field test???

I have not tried my DCH without TDA in the test field, I read to you in this forum that it was useless without TDA.

then you ask me to test with a configuration number 1 in a photo, a single antenna connected to pin 13 ? I will do !

Yes this is my DCH schematic !

important question, does the stimulator have a role outside the circuit, that is to say an influences on the target, like stimulate it for increase the phenomenon power ? or it's just to excite the receiver coil ?

Thank you Mr Morgan !