need mfd

[Geo]

Originally Posted by Fred

Hi Geo,
Irony can be healthy sometimes.

Let it... its another story

[Geo]

Originally Posted by ma330

hi geo
The transformer at the output frequency will cause instability.Strongly.Oscillating about 1 kHz to more
To solve this problem, what solution do you recommend?

I can't solve your problem. My MFD has not same problems.
I will try to upload some photos from my MFD

[ma330]

Originally Posted by Geo

I can't solve your problem. My MFD has not same problems.
I will try to upload some photos from my MFD

hi to all
What is your opinion about the use of a stereo amplifier?

[Fred]

Originally Posted by Geo

Let it... its another story

Ok Geo

I am still trying to find a proof or genuine video of a reliably working LRL.

Good luck,
Fred

[J_Player]

Originally Posted by Fred

Ok Geo

I am still trying to find a proof or genuine video of a reliably working LRL.

Good luck,
Fred

Hi Fred,
There is no proof...
There are only stories...
From MFD users and from Carl-NC

Also, there are some tests that Carl-NC witnessed.


Best wishes,
J_P

[ma330]

hi to all
What is the most accurate frequency for gold?
Brass rod is in contact with the hand is better or insulation?

[WM6]

Originally Posted by ma330

hi to all
What is the most accurate frequency for gold?
Brass rod is in contact with the hand is better or insulation?

Without bare contact there is not real dowsing possible and dowsing rod is out of its real function.

[ma330]

Originally Posted by WM6

Without bare contact there is not real dowsing possible and dowsing rod is out of its real function.

tank you wm6
The brass rod is connected to an oscillator?
The best way to find the exact spot with brass rods how?
Can you show me a drawing?

[WM6]

Originally Posted by ma330

The brass rod is connected to an oscillator?
The best way to find the exact spot with brass rods how?
Can you show me a drawing?

Hi ma330
If you wish to discuss your problem, then you need to show us your problem in form of drawing.
Otherwise we can discuss here dowsing principle only. Nobody can read your mind.

[ma330]

hi to all
What is best for those with metal and brass rods are in contact And does not impact on the frequency of 5 kHz?

[WM6]

It depend of your electronic circuit solution. No matter of frequency you use.

If your electronic implies your body sensory system (biofeedback) then YES, brass rod need to be in galvanic contact with your body.

If your electronic does not implies your body sensory system (biofeedback) then NO, brass rod should not to be in galvanic contact with your body.

[ma330]

I made ​​a positive output mfd with a wireless connection to the land.
My generator has a very high stability when connected to ground

[WM6]

Originally Posted by ma330

I made ​​a positive output mfd with a wireless connection to the land.
My generator has a very high stability when connected to ground

Great. Congratulations.

[ma330]

How can i understand where the metal bars is specified?Or non-metal
What method do you recommend?

[WM6]

Originally Posted by ma330

How can i understand where the metal bars is specified?Or non-metal
What method do you recommend?

You must have this in gene. This is genetic question, cause this is (despite using electronic) dowsing rod only.

[Geo]

A member ask from me to attach here the pcb of Carl's MFD because he can't read the geotech.
Its here ...

[ma330]

And a member asked me about the schematic
kalkale ,pcb is correct There is no problem.
for kalkale

[ma330]

hi wm6 and j-p and geo and other freinds
I worked with my mfd.Bars indicate one point, according to j-p.
http://www.longrangelocators.com/for...1&postcount=10
http://www.longrangelocators.com/for...4&postcount=13
I dug into the specified location and took out a stone at a depth of 120 cm.
my lrl detect Was evident in the stone.
How do I make the distinction between rock and metal veins?
How do I filter would only reveal rocks and minerals and metals?

[WM6]

Originally Posted by ma330

I dug into the specified location and took out a stone at a depth of 120 cm.
my lrl detect Was evident in the stone.

What sort of stone you dug, Ferro ore?

[ma330]

Originally Posted by WM6

What sort of stone you dug, Ferro ore?

Ordinary stone

[WM6]

Originally Posted by ma330

Ordinary stone

You detected this with earth probe and dowsing rods?

[ma330]

Originally Posted by WM6

You detected this with earth probe and dowsing rods?

yes wm6
This was the rock line signals
I want to filter out the bars with an electronic circuit
please help me

[WM6]

Originally Posted by ma330

yes wm6
This was the rock line signals
I want to filter out the bars with an electronic circuit
please help me

If you use resistivity meter with earth probe, then with most stone you get high resistivity and with metallic deposit low resistivity. Converting to frequency stone respond to low and metallic deposit to high frequency.

So, as first, your earth probe have to be connected to earth resistivity responsive signal generator and as second you need to follow those frequency changes in comparison to earth resistivity standard which you get by 3th earth probe.

How this frequency changes can be received by dowsing rod sensor is out of my knowledge. I think you will lost your youth before you realised, that you need to be born dowser to be successful this dowsing way.

[ma330]

Originally Posted by WM6

If you use resistivity meter with earth probe, then with most stone you get high resistivity and with metallic deposit low resistivity. Converting to frequency stone respond to low and metallic deposit to high frequency.

So, as first, your earth probe have to be connected to earth resistivity responsive signal generator and as second you need to follow those frequency changes in comparison to earth resistivity standard which you get by 3th earth probe.

How this frequency changes can be received by dowsing rod sensor is out of my knowledge. I think you will lost your youth before you realised, that you need to be born dowser to be successful this dowsing way.

tank you wm6

[oroboy]

http://forums.qrz.com/showthread.php...elow-500-KHz)&