Alonso PD

[aft_72005]

I remember to have excelent results in detection of spark(1,5 V)

For comparing, please say what distance detect 1.5 volt batt. short circuit ?
What long of wire ( short circuit) ?
Best regards.

[Geo]

Originally Posted by Morgan

I remember to have excelent results in detection of spark(1,5 V) and TV screen,when use 15 cm diam. and 50+50 turns coil. Put this in PDK,and start work only with the Passive Receiver,exelent result,but no signals in my field test. But if double O and Passive R, work together,it catch the phenomenon.
Anyway according Alonso,the ferrite can catch treasure,also the coil 50+50,thats wath Esteban said...

The things are more simple. With 15cm coil for the receiver you will have better results at the spark detection but it will be more more sensitive to the Sky-Ground phenomenon. This is the reason that the prototype has small coil. And with O-O coils and a small coil for the passive receiver you cannot adjust the null between them!!!

[Geo]

Originally Posted by aft_72005

For comparing, please say what distance detect 1.5 volt batt. short circuit ?
What long of wire ( short circuit) ?
Best regards.

Hi Aft.
Take a 25cm wire 1.... 2.5mm diameter and short a 1.5v battery. When you let free the wire you must hear the beep from 60cm + +. I hear the spark at 80cm far on my PD and from 1.80m+ on my electrostatic detector.
Regards

[aft_72005]

Hi Geo
My modified handmade , ( not exactly Alonso PD) , can detect magnetic field produced
From 1.5 volt batt. Short circuit from 50-100 cm. and some times 1.5 -2m wire long is 15 cm.
Also only passive Receiver can detect from 30 cm.
At test , not detected iron water pipe buried at soil over 30 years
Ago . deep was 40 cm
Best regards .

[Geo]

Originally Posted by aft_72005

Hi Geo
My modified handmade , ( not exactly Alonso PD) , can detect magnetic field produced
From 1.5 volt batt. Short circuit from 50-100 cm. and some times 1.5 -2m wire long is 15 cm.
Also only passive Receiver can detect from 30 cm.
At test , not detected iron water pipe buried at soil over 30 years
Ago . deep was 40 cm
Best regards .

Hi aft.
Passive receiver must detect the spark at least from 50.. 60cm.
Normal, the PD when work with Omega and PCB5 on, can't detect the spark!!!!

Regards

[Morgan]

Originally Posted by aft_72005

Hi Morgan
As my experiments,
Please more explain, how passive receiver can work with TR section while there isn't
Null point behind it? Also passive receiver will go to saturation mode when TR section
Beginning to work .

This is the big problem with the people who have made the PISTOLDETEKTOR,they not found the null point and the balance who avoid saturation of Passive R.

Anyway if you use Passive Receiver alone,but with good sensitivity(50+50 turns 0,20mm with 12 or 15 cm diameter coil) its possible to find precious metal,medium or big size,thats what i know from Alonso the LRL inventor.
So,everybody can try,and the Passive R. working alone is fully automatic,any beep means gold/silver. no erratics,unless other kind of electromagnetic field who can make the PD give the false signals.

[Morgan]

Originally Posted by aft_72005

For comparing, please say what distance detect 1.5 volt batt. short circuit ?
What long of wire ( short circuit) ?
Best regards.

With the 50+50 coil,using Passive R. ,1,5 V batt. and 20cm copper wire,it detect 80cm distant.
With original ferrite as i remember was 40 cm.

[Morgan]

Originally Posted by Geo

Hi aft.
Passive receiver must detect the spark at least from 50.. 60cm.
Normal, the PD when work with Omega and PCB5 on, can't detect the spark!!!!

Regards

Yes,but detect the TV radiation 6meters or more,and others source of electric fields.

[aft_72005]

Passive receiver must detect the spark at least from 50.. 60cm.

Hi Geo
Yes, my passive receiver act as you said

Normal, the PD when work with Omega and PCB5 on, can't detect the spark!!!!

Yes, also I test other configuration

[aft_72005]

This is the big problem with the people who have made the PISTOLDETEKTOR,they not found the null point and the balance who avoid saturation of Passive R

Hi Morgan
How you solved this problem ?

[aft_72005]

Anyway if you use Passive Receiver alone,but with good sensitivity(50+50 turns 0,20mm with 12 or 15 cm diameter coil) its possible to find precious metal,medium or big size,thats what i know from Alonso the LRL inventor

Yes, I did this test before , but with my modified at passive receiver circuit
Detect spark more than 1 meter . didn't test at historical places yet .
Best regards.

[aft_72005]

Passive receiver must detect the spark at least from 50.. 60cm.
Normal, the PD when work with Omega and PCB5 on, can't detect the spark!!!!

Yes,but detect the TV radiation 6meters or more,and others source of electric fields.

Hi
What of these is correct? Television radiation or spark detection ?
Which of these similar to target "phenomenon"?????
Best regards.

[Morgan]

Originally Posted by aft_72005

As shown in picture , when side of the box , closed , double O will be parallel with TR coils , not orthogonal .

The final experiment with this coil for good results ,it should be orthogonal as you said.
Also you can use one ortogonal coil behind the Omega in your PD,works better than ferrite,but the diameter should be proportional to the RX in the Omega.

[Morgan]

Originally Posted by aft_72005

Hi
What of these is correct? Television radiation or spark detection ?
Which of these similar to target "phenomenon"?????
Best regards.

All LRL who work are Electromagnetic field detectors,most of then catch 1,5 V sparks,TV radiation(all of them catch this) ,economy lamps,halogen bulbs etc etc,so we no need to be EE to understand what is the PHENOMENON,just ENERGY irradiated from the gold&silver becouse of the gorund acids acting during many years in contact with the metal produce one AURA around the target,also IONS are involved in this process.
Damasio was realy great genius,i only not agree with him becouse of the huge price of Mineoro devices,he also should think about the poor TH´s...

R.I.P.