Free project PDK

[raff33]

Originally Posted by Nicolas

Hi my Old dear friend from Morocco
The frequency of morocco and Ageria and Tunisia is same my dear is between 58khz and 62 khz

Good success for you my neighbor

manyyyyyyyyyyythanks again my freind nicolas for informations
raff33 from old kunoooz.com

[Nicolas]

Originally Posted by raff33

manyyyyyyyyyyythanks again my freind nicolas for informations
raff33 from old kunoooz.com

Yes I remember that. Welcome everywhere and all

[nelson]

My friend
My coins just have 1 year buried, so is too soon to get a signal by now.
Regards
Nelson

Originally Posted by raff33

Hi nelson, good work my freind
but what's about your buried coins for test , can't you get singnal from ?
nice job

[Nicolas]

Hi
I make this video for members who have made ​​this project. Here is the method to tune your PDK and oscillates, upon a well-defined frequency by yourself in using capacitor parallel with the coil and Gain Potentiometer 20K.

http://www.youtube.com/watch?v=yzjPAaQ5pS0

Note I do this test on a part of my V41 KING LRL up well for you as it works on a passive receiver which is part of the PD Alonso amended

good luck to all the guys

[okantex]

what does mean video is private?

ı made this circuit , I have 12 different frequency option , sometimes most of them has click, sometimes not.
once channel has signal even the pot is it's left begining.
some of them starts after starting turning right.

[Nicolas]

Originally Posted by okantex

what does mean video is private?

ı made this circuit , I have 12 different frequency option , sometimes most of them has click, sometimes not.
once channel has signal even the pot is it's left begining.
some of them starts after starting turning right.

Hi Okantex sorry I have problem with this big video I upload other for you


http://www.youtube.com/watch?v=Lu3N1Aipk5U&feature=youtu.be

[iron1944]

Mr. Nicolas
great USTA
I'm in Izmit in Turkey,
Where I live in the 30125 Latitude 41.054 Longtu are in place.
What is the frequency of this region for the PDK A13?
Thank you.

[Nicolas]

Hi all
Sorry for the problem in the two first Videos

I put here the new

http://www.youtube.com/watch?v=Lu3N1Aipk5U

http://www.youtube.com/watch?v=zBR7Jh6YSfM

And waiting the admin Modify that in my comment number #80 and #82

[Nicolas]

Originally Posted by iron1944

Mr. Nicolas
great USTA
I'm in Izmit in Turkey,
Where I live in the 30125 Latitude 41.054 Longtu are in place.
What is the frequency of this region for the PDK A13?
Thank you.

Hi Dear welcome look that with our friend Okantex is from your city Izmit he have the value of frequency

[okantex]

I have a problem.
İ have clicks (sounds) without any antenna connections to circuit.
These. Clicks are not continious.

[Nicolas]

Originally Posted by okantex

I have a problem.
İ have clicks (sounds) without any antenna connections to circuit.
These. Clicks are not continuous.

News PDK A13 Nicolas build by Our friend from Algeria

[Nicolas]

[roccocoin]

hello nicolas, great job, but you've all posted because even I can build it? italianano I am a friend of the francoitaly, but this pdk works with 1 single coil? I did the totem but I do not work, I made yet another but the same does not work, your complete and everything? parts list and the base to be copied? really tanks







Annulla modifiche












Il tuo contributo sarÃ* utilizzato per migliorare la qualitÃ* della traduzione e può essere mostrato agli utenti in modo anonimo

Contribuisci
Chiudi


Grazie per l'invio.



























Please help Google Translate improve quality for your language here.
Google Traduttore per il Business:Translator ToolkitTraduttore di siti webStrumento a supporto dell'export


Trascina e rilascia il file o il link qui per tradurre il documento o la pagina web.
Trascina e rilascia il link qui per tradurre la pagina web.
Il tipo di file che rilasci non è supportato. Prova altri tipi di file.
Il tipo di link che rilasci non è supportato. Prova altri tipi di link.

[okantex]

Is this algerian friend will join us.
can he make a small video to show how does it work?

batter led do not work at mine circuit

[okantex]

Is this algerian friend will join us.
can he make a small video to show how does it work?

battery led do not work at my circuit

[Nicolas]

Originally Posted by okantex

Is this algerian friend will join us.
can he make a small video to show how does it work?

battery led do not work at my circuit

Check the transistor or the variable resistor

[Belief]

Hello dear Nicolas

What is the maximum detection depth of free PDK??
How can to find point and determin depth object.??

[Nicolas]

Originally Posted by Belief

Hello dear Nicolas

What is the maximum detection depth of free PDK??
How can to find point and determin depth object.??

60 cm dear not other

[LRLMAN]

Hi Dear Nicolas I live Here in Mexico for be more precise, I live in the Pacific coast in the state of Michoacan, Mexico, and I want to ask you about the frequency about this place?

You know which is the frequency of here?

Greetings.

LRLMAN.

[Nicolas]

Originally Posted by LRLMAN

Hi Dear Nicolas I live Here in Mexico for be more precise, I live in the Pacific coast in the state of Michoacan, Mexico, and I want to ask you about the frequency about this place?

You know which is the frequency of here?

Greetings.

LRLMAN.

Hi my dear friend LRLMAN
Ok I give you that because my friends in Mexico try this frequency
But you not have answer all my Emails sent for you. I don't know why?

The freuqency is between 62 kHz and 73 khz

[LRLMAN]

Originally Posted by Nicolas

Hi my dear friend LRLMAN
Ok I give you that because my friends in Mexico try this frequency
But you not have answer all my Emails sent for you. I don't know why?

The freuqency is between 62 kHz and 73 khz

OK My Dear Friend Nicolas, Excuse me for not response your mails, I have long been absent from this forum for reasons of little time in my work and because I've been busy doing all sorts of modifications to alonso project but with very little results because I have very little electronic knowledge, but i have made some modifications to the PD Alonso I think even I need very little to find the solution.

Again I´m sorry and I tell you now I plan to be more active on this forum, so anything that i can help you.....or anything I can share with you and all here.

Best Regards.

LRLMAN.

[Nicolas]

Originally Posted by LRLMAN

OK My Dear Friend Nicolas, Excuse me for not response your mails, I have long been absent from this forum for reasons of little time in my work and because I've been busy doing all sorts of modifications to alonso project but with very little results because I have very little electronic knowledge, but i have made some modifications to the PD Alonso I think even I need very little to find the solution.

Again I´m sorry and I tell you now I plan to be more active on this forum, so anything that i can help you.....or anything I can share with you and all here.

Best Regards.

LRLMAN.

Ok thanks no Problem ...welcome
nice to meet you my friend it's a pleasure to me

[okantex]

hi ,
I found a lose connection of soldering at on-off switch.
right now, battery led works good.

but I still have problem Ithink.
when ı built circuit , 3 weeks ago, it was working good.

right now ,when I switch on the circuit ,(at home) circuit starts continous beeps .I can not control the beeps by pot.
I repeat on-off circiut. I do not have this contious beeps at each on-off. it beeps or not beeps. if it does not beep at start , circuit do not have any beep by changing controls.. ,or changing caps.
ı tried tv remote , there is no attraction on both stuations.
but 2 weeks ago ,circuit could was beeping regardless of frequency to remote when it was silent.hi ,
I found a lose connection of soldering at on-off switch.
right now, battery led works good.

but I still have problem Ithink.
when ı built circuit , 3 weeks ago, it was working good.

right now ,when I switch on the circuit ,(at home) circuit starts continous beeps .I can not control the beeps by pot.
I repeat on-off circiut. I do not have this contious beeps at each on-off. it beeps or not beeps. if it does not beep at start , circuit do not have any beep by changing controls.. ,or changing caps.
ı tried tv remote , there is no attraction on both stuations.
but 2 weeks ago ,circuit could was beeping regardless of frequency to remote when it was silent.

[Nicolas]

Originally Posted by okantex

hi ,
I found a lose connection of soldering at on-off switch.
right now, battery led works good.

but I still have problem Ithink.
when ı built circuit , 3 weeks ago, it was working good.

right now ,when I switch on the circuit ,(at home) circuit starts continous beeps .I can not control the beeps by pot.
I repeat on-off circiut. I do not have this contious beeps at each on-off. it beeps or not beeps. if it does not beep at start , circuit do not have any beep by changing controls.. ,or changing caps.
ı tried tv remote , there is no attraction on both stuations.
but 2 weeks ago ,circuit could was beeping regardless of frequency to remote when it was silent.hi ,
I found a lose connection of soldering at on-off switch.
right now, battery led works good.

but I still have problem Ithink.
when ı built circuit , 3 weeks ago, it was working good.

right now ,when I switch on the circuit ,(at home) circuit starts continous beeps .I can not control the beeps by pot.
I repeat on-off circiut. I do not have this contious beeps at each on-off. it beeps or not beeps. if it does not beep at start , circuit do not have any beep by changing controls.. ,or changing caps.
ı tried tv remote , there is no attraction on both stuations.
but 2 weeks ago ,circuit could was beeping regardless of frequency to remote when it was silent.

Hi dear Okantex verify all transistor and all connection point EBC and the pot RV2 maybe is deflect

This error find by our friend

check your Circuit component my dear

[okantex]

where is the error in your circiut layout,
I verified all connections and component layout before mounting.
all you circiut diagram and component layout was right.

where is the error you are talking about?

I think I will reprint the board.
is there any working circiut video available?