mineoro special serie 2000

[gaucho1961]

Hello friends.
I would also like some more information on this coil, I would like to know how many turns of wire are. The main coil seems to have about 90 turns with a central outlet, would that be it ?? Has anyone else undone this coil to count the turns? Has anyone done the measurement with a multimeter or indutometer? Help me.

[reza vir]

Originally Posted by Geo

If you interesting to construct it, you can make an oscillator at the same frequency (555. 4011 etc) and connect it to 4k7 resistance.

Hello geo
This is not the 4011
I checked out the pins
For example, pin 8 has a connection
But it does not work

[reza vir]

4000 series pin out

[abdou2014]

Originally Posted by Geo

For all...
Look carefully the audio stages.
They have very interest.

Are there any errors in the TBA820 circuit and the Audio circuit ???

[abdou2014]

I noticed when the receiver is set at the beginning of the led lighting, and that I turn on the stimulator, the LED goes off and gives me the posibility to increased sensitivity .
usually when the emitter turns on the led light and not make it off ???

[abdou2014]

and this result requires an accurate adjustments of frequency and duty cycle ,

[abdou2014]

I hope someone tells me if it's a good result or a mistake .

[Geo]

Originally Posted by abdou2014

Are there any errors in the TBA820 circuit and the Audio circuit ???

No (as i see it...)

[abdou2014]

Thank you Mr Geo , I noticed that the mixing with the big coil prevents the capture by infrared,
I do not use yet the stage TBA and audio posted here, I used an audio transformer with the beep generator, it works well but even by decreasing the sensitivity the led flashes very slowly and dont off.

[abdou2014]

Mission accomplished, very stable, very sensitive, there are errors on the diagram, capture of spark from a lighter at 6 meters

[shahrayar]

Originally Posted by abdou2014

Mission accomplished, very stable, very sensitive, there are errors on the diagram, capture of spark from a lighter at 6 meters

F?licitations, mon fr?re
A pr?sent? le programme sur lequel mon fr?re a travaill?, je veux le faire

[abdou2014]

you had several requests from me to team up with me and you refused
I am your old friend , Mr Benslaman

[abdou2014]

No reaction to electricity or tv and other household appliances even by reproaching very close
it reacts only to the spark and at a great distance .

[shahrayar]

Originally Posted by abdou2014

you had several requests from me to team up with me and you refused
I am your old friend , Mr Benslaman

when was that?
HAKIM ALGERIAN

[Pahom]

Chuyka for a spark ... this is an indirect indicator .....

[abdou2014]

Originally Posted by shahrayar

when was that?
HAKIM ALGERIAN

My name is not HAKIM, it's just a pseudonym, when you called yourself (mimou, chayrayar, na3nou3, adam, vali)

[abdou2014]

Originally Posted by Pahom

Chuyka for a spark ... this is an indirect indicator .....

Yes this is the secret , the spark generate ......... field ?????

[Pahom]

Originally Posted by abdou2014

My name is not HAKIM, it's just a pseudonym, when you called yourself (mimou, chayrayar, na3nou3, adam, vali)

Wow all around spies .....:прохладный:

[abdou2014]

007

[shahrayar]

The name (Naanoua) from where I got it is known only to one person

[shahrayar]

Originally Posted by abdou2014

007

Put the chart or I tell everyone who you are
You spy with another membership

[kostas87]

Originally Posted by Geo

Hi.
Brasilpb wrote it!!.
At this version there is only a rf sniffer at 120Mhz.
Bfo at 130Khz don't interest us!!
If you make changes at oscillator then maybe to catch the phenomenon with bfo circuit.

Regards

Hi !!
what changes is needed to the bfo oscillator to catch the phenomenon?

[Geo]

Hi Kosta!!.
You must modify the level of bfo signal.
I NEVER tried it, i speak theoretically!!!

[kostas87]

Originally Posted by Geo

Hi Kosta!!.
You must modify the level of bfo signal.
I NEVER tried it, i speak theoretically!!!

Thanks GEO!
I will try something this winter, theoretically in the first stage I will make a bfo with crystal cd 4023, in the second stage I will add a signal amplifier and in the last stage I will make the audio with a lm 380 that detects both frequency and voltage dc in the sound signals. and of course I will add a stimulating coil.

[Geo]

If winter is heavy.... yes