Electronic dowsing rod

[Qiaozhi]

Originally Posted by detectoman

where is maxxxxxxxxxxxxxxxxxxxxxx?

http://www.geotech1.com/forums/showp...0&postcount=12

[Fred]

Originally Posted by J_Player

Hi Fred,
You may be right about that. I always liked the tantalum capacitors. Those are cool as long as you don't go over thier voltage rating. And they never wear out like electrolytics (at least mine never did).

Best wishes,
J_P

Yes, tantalum are good as long as they are very carefully used.Their tendency to just go into a complete short circuit for no apparent reason make me fear them .

Originally Posted by detectoman

where is maxxxxxxxxxxxxxxxxxxxxxx?

Yes,me too, for some reason when we talk "capacitors" i think "Max"

[WM6]

Originally Posted by Qiaozhi

However, I cannot see why it would need to be a polarized capacitor. Simply replace it with a 100nF cap.

Agree. C2 isn't electrolytic.

[detectoman]

wm6 semms how max clone
isnt possible wm6 in very less time whit treadhs is guru" then he is max
hello ,maxxxxxxxxxxxxxxxx you be continued with sceptic jokes

[WM6]

Originally Posted by detectoman

wm6 semms how max clone
isnt possible wm6 in very less time whit treadhs is guru" then he is max
hello ,maxxxxxxxxxxxxxxxx you be continued with sceptic jokes

How did you guess?

Yes, I am maXXX and you are Carmen Electra.

[Morgan]

Originally Posted by detectoman

wm6 semms how max clone
isnt possible wm6 in very less time whit treadhs is guru" then he is max
hello ,maxxxxxxxxxxxxxxxx you be continued with sceptic jokes

He is not Max.

Max is very busy,in the circus. This you can see in the photo,he is among other clouns...

[WM6]

Originally Posted by Morgan

Max is very busy,in the circus. This you can see in the photo,he is among other clouns...

Evidently, regarding circus, you are well informed insider.

[Morgan]

Originally Posted by detectoman

wm6 semms how max clone
isnt possible wm6 in very less time whit treadhs is guru" then he is max
hello ,maxxxxxxxxxxxxxxxx you be continued with sceptic jokes

Where is Max ?

The answer can be hiden in this picture...

[WM6]

Originally Posted by Morgan

Where is Max ?

The answer can be hiden in this picture...

Max is here taken the picture of mineoro family.

[detectoman]

quaozhy;, thanks very much for you attention in inform on ausence of max, es usted muy amable,

[epitopios]

Originally Posted by Esteban

No. But you can make another U antenna wich content the sensor antenna.

dear Esteban , can you give us please a better relationship and connections about two antennas ???



friendly , epitopios

[Esteban]

Originally Posted by epitopios

dear Esteban , can you give us please a better relationship and connections about two antennas ???



friendly , epitopios

Separation can be 8 cm between them. In center is sensor antenna. Out is ground antenna.

[epitopios]

Originally Posted by Esteban

Separation can be 8 cm between them. In center is sensor antenna. Out is ground antenna.

you mean something like that ???



and the Base of the BC107 tranzistor , goes where ???

friendly , epitopios

[Esteban]

Mantain the original oval form for both pieces of steel. The piece of steel equal in form (oval) surround the sensor antenna. This another earth reference is connected to ground. You can vary the angle of this oval form (the connected to ground) for to obtain better results.

Base is connected to a coil surrounding a portion of the steel antenna. The steel "transfers" the incoming "signal" to this "floating" coil.

[Morgan]

Originally Posted by Esteban

Mantain the original oval form for both pieces of steel. The piece of steel equal in form (oval) surround the sensor antenna. This another earth reference is connected to ground. You can vary the angle of this oval form (the connected to ground) for to obtain better results.

Base is connected to a coil surrounding a portion of the steel antenna. The steel "transfers" the incoming "signal" to this "floating" coil.

Did you already try this device ?

[Esteban]

Originally Posted by Morgan

Did you already try this device ?

NO!!!

[epitopios]

dears WM6 and Esteban
because Ι am a strange person and if I see something i must make it my self so I can see if this works or not , I make it !!!



I make it with the audio generator of Esteban , i make also the antenna but it didnt work so I put an antenna in a box of cookies and when i come closer to the mouse of my PC i listen a noise at the buzzer
sorry WM6 but with your antenna , i hear nothing !!!!!!
friendly , epitopios

[Morgan]

Originally Posted by epitopios

dears WM6 and Esteban
because Ι am a strange person and if I see something i must make it my self so I can see if this works or not , I make it !!!



I make it with the audio generator of Esteban , i make also the antenna but it didnt work so I put an antenna in a box of cookies and when i come closer to the mouse of my PC i listen a noise at the buzzer
sorry WM6 but with your antenna , i hear nothing !!!!!!
friendly , epitopios

Thanks

Then tell us results in the field.

[Esteban]

Originally Posted by epitopios

dears WM6 and Esteban
because Ι am a strange person and if I see something i must make it my self so I can see if this works or not , I make it !!!



I make it with the audio generator of Esteban , i make also the antenna but it didnt work so I put an antenna in a box of cookies and when i come closer to the mouse of my PC i listen a noise at the buzzer
sorry WM6 but with your antenna , i hear nothing !!!!!!
friendly , epitopios

The beeper gen. works great. You need to regulate the preset very near the starting of beeps. For to test you should approach to a fluorescent tube or a TV screen. This must beep because the dispersion of 100 or 120 hz in fluorescent lamp or horizontal of TV. The type of buzzer must be with internal oscillator, this generate a nice tone. With other type you can't hear nothing.

[WM6]

Originally Posted by Esteban

The beeper gen. works great. You need to regulate the preset very near the starting of beeps. For to test you should approach to a fluorescent tube or a TV screen. This must beep because the dispersion of 100 or 120 hz in fluorescent lamp or horizontal of TV. The type of buzzer must be with internal oscillator, this generate a nice tone. With other type you can't hear nothing.

Hi Esteban, hi epitopios,

near fluorescent lamp choke must be clear signal with U rod and primary schematic too. If not, there is something wrong in circuit. U rod may not to be from feromagnetic (magnet may not stick on it), if there is not pure rostfree steel better use brass rod.

[Esteban]

Originally Posted by WM6

Hi Esteban, hi epitopios,

near fluorescent lamp choke must be clear signal with U rod and primary schematic too. If not, there is something wrong in circuit. U rod may not to be from feromagnetic (magnet may not stick on it), if there is not pure rostfree steel better use brass rod.

This is true. With a headphone (better high impedance) connected via 100 nF you must to hear the cycles at more distance too.

[WM6]

Originally Posted by Esteban

This is true. With a headphone (better high impedance) connected via 100 nF you must to hear the cycles at more distance too.

And first transistor used to be BC107C or BC547C type and if one use U rod out of brass to connect free end of coil on U rod.

[epitopios]

Originally Posted by Morgan

Thanks
Then tell us results in the field.
Morgan,
after April until snow will melt ,at that time weather at my plays very heavy, we will see the results

Esteban
The beeper gen. works great. You need to regulate the preset very near the starting of beeps. For to test you should approach to a fluorescent tube or a TV screen. This must beep because the dispersion of 100 or 120 hz in fluorescent lamp or horizontal of TV. The type of buzzer must be with internal oscillator, this generate a nice tone. With other type you can't hear nothing.

Esteban ,
you are right , I try it before a TV set and a fluorescent and the noise of buzzer was bigger , but always with the cookies-antenna !!!

WM6
near fluorescent lamp choke must be clear signal with U rod and primary schematic too. If not, there is something wrong in circuit. U rod may not to be from feromagnetic (magnet may not stick on it), if there is not pure rostfree steel better use brass rod.

WM6
personally , when i saw that with your antenna I had no signal , I just figure out that with the cookies-antenna I had a signal with my pc mouse nearby
but i will try again with your antenna with a different metal , even i used brass rod


Esteban
This is true. With a headphone (better high impedance) connected via 100 nF you must to hear the cycles at more distance too.

I didnt try that yet , but i will do it maybe today

WM6
And first transistor used to be BC107C or BC547C type and if one use U rod out of brass to connect free end of coil on U rod.

As I wrote at the second page , BC107 and BC157 are retired.
so I used BC547 and BC557

friendly , epitopios

[mehdi]

hi to all
please upload the correct shematic of electric dowsing to everyone use that shema
with great regards
mehdi

[J_Player]

Originally Posted by mehdi

hi to all
please upload the correct shematic of electric dowsing to everyone use that shema
with great regards
mehdi

.


Best wishes,
J_P