LRL Ionic/Electrostatic energy field locator

[Jim]

Originally Posted by Qiaozhi

In other words ... we will never get a sensible answer regarding references to these so-called "latest brainwave studies".

You know it. Just tons of the usual crap.

[Qiaozhi]

Originally Posted by Dell Winders

I did point out the stupidity, and hypocrisy of your lame comment, when you rationalize that anything posted by someone other than your self, or your cohorts as being nothing more than hearsay.

Sadly, because of your mentality, "The door to knowledge and new ideas is never open to a closed, or prejudiced mind". Dell

As I surmised ... you are unable to answer the question, as you made up the whole thing. This appears to be your usual operandi. i.e. Making bold statements which cannot subsequently be confirmed by reference to the source.

And "yes", your statement is simply hearsay unless you can quote the reference to back up your claims.

Case closed.

"WHAT DOESN'T WORK, CANNOT BE MADE TO WORK"

[Morgan]

Originally Posted by Esteban

You have some pics of the pistol here:

Hello Esteban

I´m analizing this resonating chamber...

The tube with the sample...The sample is connected somewhere ?

Regards

[Morgan]

Originally Posted by Morgan

Hello Esteban

I´m analizing this resonating chamber...

The tube with the sample...The sample is connected somewhere ?

Regards

???

[Morgan]

Originally Posted by Morgan

???

Attachment 12043

This antenna is useful to adapt in the Electrostatic LRL.
Inside the tube exist gold sample.

The circuit can be very easy,and possible no need the BFO to work as LRL,someone can try this circuit.

[Morgan]

Originally Posted by Morgan

???

Attachment 12043

The box should be in wood or this LRL not work.
Any plastics not aloud the circuit to work.
This is similar to Zahori but more simple.
The antenna L1 and L2 can be like in this picture.

[Morgan]

Originally Posted by Morgan

???

Attachment 12043

The GOLD or SILVER sample in the L1 antenna is the anode

The big L2 antenna connected to GND is the cathod

This works as IONIC CHAMBER.

[FrancoItaly]

Hi Morgan
It is a your supposition or you have seen the pistol ? I think that in Mineoro lrl the big coil it is connected to a RX stage and the TX coil it's around the gold sensor.

Best Regards

[ODM]

Originally Posted by Morgan

The box should be in wood or this LRL not work.
Any plastics not aloud the circuit to work.

Will plywood be ok or does the wood need to be solid wood?

And glue/screws? Will non plastic glues like caseine work better?

[Morgan]

Originally Posted by FrancoItaly

Hi Morgan
It is a your supposition or you have seen the pistol ? I think that in Mineoro lrl the big coil it is connected to a RX stage and the TX coil it's around the gold sensor.

Best Regards

In Mineoro DCH 85 the BIG coil is the RF concentrator not connect nothing,and the SMALL coil connect gold sample and to RECEIVER circuit ,as you can see in the picture(blue Pistoldetector) by Esteban,and finaly exist one OSCILLATOR to stimulate(increase) the coil with sample for more range.
But this MINEORO circuit its not for put public here,is R patent.
The biger DC series have diferent configuration.

[Morgan]

Originally Posted by ODM

Will plywood be ok or does the wood need to be solid wood?

And glue/screws? Will non plastic glues like caseine work better?

All wood materials are good,the metal not afect if in small quantity,any kind of plastic afect becouse of static charge and overload this LRL.

Other important thing,better use buzzer than speaker.

[Morgan]

Originally Posted by ODM

Will plywood be ok or does the wood need to be solid wood?

And glue/screws? Will non plastic glues like caseine work better?

R8 47 K is the GAIN control

This LRL is not good for small objects,it will work with big electrostatic fields,TREASURES.

[Morgan]

Originally Posted by Morgan

???

Attachment 12043

[Funfinder]

Thx Morgan that you brought this thread back to ontopic.

[GOLDENSKULL]

Originally Posted by Morgan

Attachment 12124

Hi Morgan,
Did your LRL device can detect long time buried treasure ???!!!

[Morgan]

Originally Posted by GOLDENSKULL

Hi Morgan,
Did your LRL device can detect long time buried treasure ???!!!

I advance too much if i say direct yes,this is experimental
Yes,according size,but only BIG objects who produce uderground electromagnetic fields,these can be locateted with any electromagnetic field locator with correct frequency and antenna.
When i use my prototype with BFO,i found some large objects (copper) buried long time ago and a few meters distance,they was not deep.
But when have time i will make better antennas to avoid radio station signal(sometimes it catch radio) and concentrate for the small objects.

[Morgan]

Originally Posted by Morgan

I advance too much if i say direct yes,this is experimental
Yes,according size,but only BIG objects who produce uderground electromagnetic fields,these can be locateted with any electromagnetic field locator with correct frequency and antenna.
When i use my prototype with BFO,i found some large objects (copper) buried long time ago and a few meters distance,they was not deep.
But when have time i will make better antennas to avoid radio station signal(sometimes it catch radio) and concentrate for the small objects.

Here is some improvments for simplificate the project.
This was made by forum member Funfinder.
He get the way to detect silver ring direct from the electrostatic circuit,he use special directional antenna.

[Morgan]

Originally Posted by GOLDENSKULL

Hi Morgan,
Did your LRL device can detect long time buried treasure ???!!!

Have a look on thread ICONOS MD 807,and see the videos .

[Funfinder]

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showp...52&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

[Morgan]

Originally Posted by Funfinder

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showp...52&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

Hello

The combination of both circuits BFO+IONIC,is not so bad,just need better directional antenna . I will try to improve this project and give results here.
As i remember it was forum members Humhum and Detectoman said it works great.Of course,its not good as the Pistoldetektor,but as i told found big copper objects some meters distance,and remember one old zinc plate give also signals.This is more experimental,and it will be great if we can make it work more simple without BFO...

Regards

[WM6]

Originally Posted by Funfinder

@ GOLDENSKULL
Here you will find the actual newest schematics:

http://www.geotech1.com/forums/showp...52&postcount=9

and as directional antenna you can try out some flat metal object or a coil - perhaps also a telescop-antenna. I haven't had time yet for finding out the best directional antenna solution - perhaps also some AM radio ferrite coils would work good.
Not forget about some grounded shielding around the antenna.

Those are is decade old schematics and well known.

Here you are really actual and newest schematic of PD pistol by Funfinder:

[nelson]

Hi Morgan.
Can you give me the working frequency of the detector?
Has a hamradio entusiast, I have some antenna modeling expirence and may be i can help on, developing a suitable antenna for this divice.

Regards

Nelson

Originally Posted by Morgan

Hello

The combination of both circuits BFO+IONIC,is not so bad,just need better directional antenna . I will try to improve this project and give results here.
As i remember it was forum members Humhum and Detectoman said it works great.Of course,its not good as the Pistoldetektor,but as i told found big copper objects some meters distance,and remember one old zinc plate give also signals.This is more experimental,and it will be great if we can make it work more simple without BFO...

Regards

[humhum]

Hi to All , this modifcation version is more good for Electrostatic Swivel Antenna .

http://www.teknolojiekibi.com/yeni/i...p?topic=1809.0

[Morgan]

Originally Posted by nelson

Hi Morgan.
Can you give me the working frequency of the detector?
Has a hamradio entusiast, I have some antenna modeling expirence and may be i can help on, developing a suitable antenna for this divice.

Regards

Nelson

Hi Nelson

I would like to help you but not have any osciloscope...

Regards

[WM6]

Originally Posted by Morgan

Hi Nelson

I would like to help you but not have any osciloscope...

Regards

Hi Morgan,

here you are to download PC scope (and much more) for free:

http://www.sillanumsoft.org/prod01.htm

different solution of test probe to DIY: