|
|
#251
01-13-2015, 07:56 PM
|
||||
|
||||
Hi all
PD only for Gold it's ready. Need only final test this month, of course with videos. I use only one stage from original PD Alonso nothing more. Very small size and weight, full stability without humidity problems or sky-grounds effect. Now need only fine weather and small free time. Note: For now it remains a prototype, I have not decided yet what I'll do best regards
__________________
crypton's designer 
|
|
#252
01-13-2015, 09:23 PM
|
|||
|
|||
|
Quote:
Congratulations Excellent device and without complications As for me, I still have not succeeded in the first device manufacturing, is still the problem of discrimination He works as a pulse induction He also works with a transmitter as in this Annex video http://youtu.be/6r9LE4_Hmqw
|
|
#253
01-14-2015, 06:35 AM
|
||||
|
||||
|
Quote:
I am not Alonso I saw your video. I don't use your method best regards Andreas
__________________
crypton's designer
|
|
#255
01-14-2015, 07:46 PM
|
|||
|
|||
|
ALONSO PD ALL CONECTION
Quote:
Already I conected all pd elements but does not work as I interconnects. how do you see the image of the interconnections present here of the wires going to the receiving antenna seems that there are good? what about the zero point calibration must be done first of all of the transmitting and receiving antennas if everything is connected directly and in conjunction with the ferrite? that is where I have the problem. LRLMAN.
|
|
#256
01-15-2015, 05:54 AM
|
||||
|
||||
|
Quote:
best regards
__________________
crypton's designer
|
|
#257
01-15-2015, 06:22 AM
|
|||
|
|||
|
Quote:
And what about the interconections of all elements?? are fine?? respect to the image??? I don't know how interconnected the TX and RX, for me it's not good the image, i have a problem mi PD not work. And what about the ferrite?, how can work the ferrite? do you think if i make a short circuit with a 1.5 v, should detect it the ferrite? to know if this is working? May be tomorrow I upload a video of my Pd Working. Greetings. LRLMAN.
|
|
#259
01-22-2015, 01:43 AM
|
|||
|
|||
|
Quote:
I DID REVIEW ALL INFORMATION AND NOTHING, JUST I DID WORK THE OMEGA COIL, BUT I ASK IF ANTENNA FERRITE MUST ALSO BE WORKING?? I REVISED ALL COMPONENTS BUT I THINK MISSING SOMETHING MORE BECAUSE THE FERRITE ISN'T WORKING. IN ALONSO PD IS EASILY TO KNOW WHEN THE ANTENNA FERRITE IS WORKING WITH ONLY MAKE A SHORT CIRCUIT 1.5 BATTERY WITH A ROUND WIRE 20 CMS. LONG, OR WITH A TELEVISION REMOTE CONTROL, BUT IN THIS NEW PD NOT HAVE ANY SIGNAL WITH THE SHORT CIRCUIT AND I THINK IF IT IS NORMAL ???? SO WHERE IS THE ERROR? IN THIS NEW PISTOL DETECTOR I NOT SEE WERE HAS THE SWITCH POSITIONS ONLY FOR FERRITE OR JUST OMEGA OR BOTH. ALSO I THINK THAT YOU NOT BEEN CLEAR ENOUGH, BECAUSE ONLY THE MEMBERS OF THIS FORUM ARE SUGGESTING ALL WITH IMAGES, WITH LEGEND THE POSITIONS OF ALL COMPONENTS OF THIS EQUIPMENT AND THE PROYECT IS YOURS AND IT IS NOT OF THEM. SORRY ANDREAS. LRLMAN
|
|
#260
01-22-2015, 08:21 PM
|
||||
|
||||
|
Hi LRLMAN
I build clone with all parts, all stages as you know and publish here. Calibration is very-very difficult and critical If you have not tune all together this PD cannot work. i see clone can detect a spark only 40cm distance , a magnet near 50cm distance and ofcourse metals on air maximum 20 cm distance. TV control i think detect 20 cm distance Now if you want work with only feritte, if you want detect a spark xxx distance, this is your choice build it. For me is a pratform for better results About if i am clear or not Ofcourse i am clear. ofcourse i publish my first unit here and i say this is a real clone with small mods for better stability. ofcourse i publish here a fine PCB for all members if they want build and experiment with this. Now if you want method for full calibration or more, i think some members publish here can build this. In this case you can ask there Now about PD only for Gold I use only one preamp stage by clone alonso and new circuits by me (you can see my last photo inside PD only for Gold) Pd only for gold cannot detect metals, cannot detect sparks, cannot detect magnetic lines etc I am very clear. I publish here a thread "real clone alonso PD". I don't publish here a thread " how you can calibrate and build a clone alonso for your step by step". In this case some extra infos via my posts is a gift for every one try build one Best regards
__________________
crypton's designer
|
|
#261
01-25-2015, 12:39 AM
|
||||
|
||||
|
Quote:
Hi Andreas , maybe Now I understand what is Secret for this PD narrow band gold filter for very high frequency. Regards.
|
|
#263
01-29-2015, 07:28 PM
|
||||
|
||||
|
Quote:
My presentation of this PD was done in same box shape as much as possible dimensions is what properly, with the original schematic and very small mods for more stability. Of course I use the same box as "platform" for my PD only for gold. After finish all experiments and anything need more, i put PD only for gold in a new design box . PD only for Gold is not free regards
__________________
crypton's designer
|
|
#264
01-30-2015, 06:22 AM
|
|||
|
|||
|
Quote:
for users like me , that no have any experience in pd , build this pd is very hard best way is by pd
|
|
#266
02-23-2015, 01:36 PM
|
||||
|
||||
|
A fine circuit, need and special case, for ergonomic search and easy calibration by user. In this case i must draw a new box for put all electronics circuits, ferrite etc. I think after ten months am ready with new design circuits as you can see, my post #218.
I don't use the original PD box, because i don't like this classic design and more ,because i have problem with with vibration between base "coils housing" and main box. Need only fine weather for external tests. Inside lab PD can detect very easy Gold if put a place after 30 minutes. Very delicate unit, produce a "trust" by user via calibration and see with eyes the real detection Gold. Need small time for solve all small problems enjoy
__________________
crypton's designer
|
|
#267
02-23-2015, 08:06 PM
|
||||
|
||||
|
Quote:
|
|
#268
02-24-2015, 04:54 AM
|
||||
|
||||
|
Quote:
You are right. If you think my design-box make a "confused" or you think... i make it without your license, please inform me for change it. I like the clean solutions and i don't want make any problems
__________________
crypton's designer
|
|
#269
02-24-2015, 07:26 PM
|
||||
|
||||
|
Quote:
Absolutely no problem with your design. There is no conflict with TOTeM. I was just admiring the way you repositioned the handle for better stability.
|
|
#270
02-28-2015, 11:25 PM
|
||||
|
||||
|
Quote:
Well as for the center of Gravitate if the handle is in the center and not in the face is so easy. Not be worried Andreas do as you like without recourse to the permission. I even thought to divide your box into two, but you did it before me. OPS Then again i need ask permission from you.? I know you not give it purpose I build it without problem .... thank you Andreas this is life 
__________________
God bless all - Nicolas << My channel >> << My shop >> Please do not demand Private Messages .... I cant reply all here....For more information you can send me email ....Thank you for understanding
|
 |
|
|
Just a question
Linear Mode
