ALONSO PD MISSION ACCOMPLISHED V1,V2

[humhum]

Originally Posted by Farid

Hello Mr. Morgan
I tested your pdk 2 and 3 devices.
Unfortunately, it is only sometimes responsible in urban environments and not at all in areas outside the city.
But Alonso's pd gave me a good answer, both in the city and outside the city.

Can use 50Hz Filter for City .

[Morgan]

Originally Posted by humhum

Can use 50Hz Filter for City .

PDK-2 with upgrade LRL IR/UV it will work fine every where,

if someone interested I can send the Kit to instal, its easy

[Morgan]

Originally Posted by Farid

Hello Mr. Morgan
I tested your pdk 2 and 3 devices.
Unfortunately, it is only sometimes responsible in urban environments and not at all in areas outside the city.
But Alonso's pd gave me a good answer, both in the city and outside the city.

I can send a KIT for you to instal in PDK-2,very easy,no need electronics experience, it upgrade very well for gold targets in remote areas where Phenomenon is more dificult,see the video and read how system work


https://www.youtube.com/watch?v=ZbPVxbl7lkM

[GOLDEN LILLY]

Yes Morgan, please send me the plan for pdk upgrade to IR/UV. I want to try it...
My email: errel74@yahoo.com..thank you.

[Morgan]

I send the KIT only to person who have the ORIGINAL PDK , not the fake copy of NICOLAS PDK project.
To instal the KIT I need a photo of the inner box to explain how to do process of modification.

[Morgan]

do you have one PDK-2 original ?

[GOLDEN LILLY]

I do not have your PDK 2, but I have my own build PDK...
I thought the upgrade is for every member of this forum...my mistake.

[Morgan]

Originally Posted by GOLDEN LILLY

I do not have your PDK 2, but I have my own build PDK...
I thought the upgrade is for every member of this forum...my mistake.

as you like, I dont know behavior circuit have on this PDK CLONE, if you interested to try, I sent you but need to see where to put circuit, here photos of the KIT inside PDK-2,to have one ideia how it is

[putrechigi]

Originally Posted by Morgan

do you have one PDK-2 original ?

hi morgan nice too meet you
yes I have one pdk 2 from your construction I wrote you in pvt
reguards

[zakari]

Originally Posted by Morgan

as you like, I dont know behavior circuit have on this PDK CLONE, if you interested to try, I sent you but need to see where to put circuit, here photos of the KIT inside PDK-2,to have one ideia how it is

hi morgan

i think one of the ic is 555

and other is 358 or tl082


best regard
zakari

[Morgan]

you can buy a flames detector from ebay and make a field test with your LRL,

maybe you find something if you looking for fire flames...

[abdou2014]

which part increases the distance of detection , the sensitivity of the receiver or the power of the transmitter ?

I noticed that the UV LEDs are very fragile, if I add a BD transistor for more power the led burns .

is it preferable (if the UV emitter is a distance factor) to add other UV leds ?

Thank you Mr Morgan for your helps !

[Morgan]

the distance to the UV LED and the IR LED is important

[Morgan]

Originally Posted by Morgan

the distance to the UV LED and the IR LED is important

I get a coil formula for the Alonso PD passive receiver that can detect a 1,5V battery spark 2,20m distance, my question, someone here get this distance or more with the passive receiver ?

[Pahom]

Yes there is such a result when the receiver is clearly powered 9 volts if the power is 8.5 volts then the range falls to 1-1. 5 meters.

[Morgan]

thats right,

and more than 9V , or 9,50V that reduce distance ,

I m talking about distance I get with 2x 9V for each battery(rechargeable) using the passive receiver whitout oscillator for stimulate the RX coil, sure I get more distance using circuit stimullator,or maybe it become unstable,

thanks

[Pahom]

I got this result without a stimulant . But with a stable power supply of 9 volts.

[Morgan]

and field test results ?

[Pahom]

With that receiver, it didn't go to field testing. And there was no polygon, as there is now.

[WM6]

Originally Posted by abdou2014

which part increases the distance of detection ,
the sensitivity of the receiver or the power of the transmitter ?


!

Neither of it, if there is no resonance in communication between both.
So magic word is "tuned in resonance".

Without this, we are back to spark transmitter (now forbidden by international law) and
broadband smoggy spark communication.

Hedy Lamarr is beginning with small spark too:

https://www.marketplace.org/2017/11/...ollywood-star/

[Dubulumach]

Originally Posted by Morgan

I get a coil formula for the Alonso PD passive receiver that can detect a 1,5V battery spark 2,20m distance, my question, someone here get this distance or more with the passive receiver ?

Hy Morgan

Play with gap at ferrite. Sensitivity also depend of ferrite type.

Also you need new stimulator oscillator. Original designed has a drift and need many times retune while detecting.

Could you explain more for your UV/IR detection?

ps: PDK 2 is better schematic than PDK 3. You could tune it very well up to some limit, which was ruled by capacitivity of your hand with respect to the ground. If you make electronic tuning it would be one of Top LRLs ever made. For more details contact me at email.

Regards

[humhum]

'' Also you need new stimulator oscillator.''

What type is New Stimulator , Vertical position or ??

[Dubulumach]

Originally Posted by humhum

'' Also you need new stimulator oscillator.''

What type is New Stimulator , Vertical position or ??

Pure analogue sine SIN(x) sequencing oscillator f= 0-200 kHz with lowest THD possible. Very stable, withouth drift and with fine amplitude and phase control from 0....+-Vpp. At the output there should be broadband LF amplifier up to pair of watts. Bandwidth from 0 up to 1Mhz. These freqs. must go in/out without distortion. Prefer A-class.

Helpfulto have frq.meter. Not DSS generator because it has many harmonics in signal. Need 11-th pole filter for aliasing signal to get in close proximity of perfect sinus. Very hard to tune, need 0.1% component tolerance. Forget about DSS.

Position experimentaly.

[Dubulumach]

Magic part of PD Alonso is ferrite. Neither two or more same ferrites exist. What catch the "Halo-Effect" is only ferrite, his subatomic structure. Find radioactive one like Geo, and you would have many hundreds of meter distance, maybe km's.

[Morgan]

Originally Posted by Dubulumach

Hy Morgan

Play with gap at ferrite. Sensitivity also depend of ferrite type.

Also you need new stimulator oscillator. Original designed has a drift and need many times retune while detecting.

Could you explain more for your UV/IR detection?

ps: PDK 2 is better schematic than PDK 3. You could tune it very well up to some limit, which was ruled by capacitivity of your hand with respect to the ground. If you make electronic tuning it would be one of Top LRLs ever made. For more details contact me at email.

Regards

I get this distance on a spark not using stimulator coil.

about the IR/UV its not my invention, I made some modification, the inventor belong to this forum and not want (for the moment) the project to be clone.