LRL Ionic/Electrostatic energy field locator

[Morgan]

Originally Posted by zakari

hi morgan

can you more explain about antennas

best regards

L2= 18 cm x 11 cm BFO coil made of 12 or 15 turns,wire 0,25 mm. No Faraday Shield.


PCB2

L1= Big Aluminium Antenna 22 cm x 30 cm(ion detector 1)
L2=Small single turn,copper antenna 8cm x 4cm ,Ion detector 2(this one fixed in the wood box,behind the BFO coil).

[Morgan]

Originally Posted by Saiman

Morgan hai, hai all.
I have a little problem with the value of capacitor C12.
How Did The real value? 12.5uf? or 2.5uf, or 25uf.
Help me. The real value for c12

the correct value for the C12 is 125 uF 16v, you can check the material list in the first page of the thread.

[Morgan]

Originally Posted by GYJ99999

Hi dear Morgan: hello
LRL Ionic/Electrostatic energy field locator principle diagram of the circuit diagram to me? I'm a fan treasure from China, my email address: 122112114 @qq.com hope to receive your E-mail.
greetings

hello

you can see all information about this locator , it starts in the first page of the thread.

[ozanmelih]

Hello Mr. Morgan. Nice to see you again. What kind of LRL do you use for now? May you share some photos for us please?

[zakari]

Originally Posted by Morgan

L2= 18 cm x 11 cm BFO coil made of 12 or 15 turns,wire 0,25 mm. No Faraday Shield.


PCB2

L1= Big Aluminium Antenna 22 cm x 30 cm(ion detector 1)
L2=Small single turn,copper antenna 8cm x 4cm ,Ion detector 2(this one fixed in the wood box,behind the BFO coil).

thank you so much dear morgan

[Morgan]

Originally Posted by ozanmelih

Hello Mr. Morgan. Nice to see you again. What kind of LRL do you use for now? May you share some photos for us please?

[abdou2014]

Nice work Mr Morgan, can you share with us this project

[Dubulumach]

Originally Posted by Morgan

Attachment 6798
PCB1

L2= 18 cm x 11 cm BFO coil made of 12 or 15 turns,wire 0,25 mm. No Faraday Shield.


PCB2

L1= Big Aluminium Antenna 22 cm x 30 cm(ion detector 1)
L2=Small single turn,copper antenna 8cm x 4cm ,Ion detector 2(this one fixed in the wood box,behind the BFO coil).

Hello Morgan

Did you found any Gold or Silver piece with this LRL?

Answer welcomed.

Best wishes
Dubulumach
South Serbia
East Balkan

[Dubulumach]

Originally Posted by Morgan

TO EVERYBODY WHO DECIDE TO CONSTRUCT THE LRL BFO ANTENNAS,SHOULD SEND TO ME PM FOR MORE INFORMATION.

I am very interesting to test your BFO LRL.

Go comfortable and send me all informations including tuning, You have my email
00000
ps: Maybe it could be drastically improved ....

Best wishes
Dubulumach

[abdou2014]

i see patch antenna not coil i think 3Hz to 80Hz bandwidth

[Dubulumach]

Originally Posted by abdou2014

i see patch antenna not coil i think 3Hz to 80Hz bandwidth

Maybe Morgan need implement an ASAR antenna concept ?

ASAR - Active synthetic aperture antenna with full control of gold scanning beam ?

[Geo]

Originally Posted by Morgan

Attachment 19952

Same pcb with Iconos (same schematic with simple version of DCH85).
So for me PDK 2.1 or 2.2 is much better than PDK 3.0

[humhum]

Originally Posted by Geo

Same pcb with Iconos (same schematic with simple version of DCH85).
So for me PDK 2.1 or 2.2 is much better than PDK 3.0

Dear Geo , Does you have İconos schematic for Publish here ?

[Geo]

Originally Posted by humhum

Dear Geo , Does you have İconos schematic for Publish here ?

Hi.
Sorry but i have not it .
Before 2...3 years a crash at my hard disk destroed a lot of files (schematics) and i never looked to find them because my interesting for detectors has stop to be big...