|
|
#2
10-09-2012, 11:44 PM
|
||||
|
||||
Quote:
The trick is to use burned wood aches mixed with ground and a lot of salt. This necklace is buried 3 years,i dig only half of it ,the other half stay underground to keep the PHENOMENON active. Object buried in normal ground conditions need many years to get this 8 m distance . As you can see,when is to pinpoint the necklace,the PDK overload and cut the signals when i aproach to the object,once i keep 1 m distance above the object,the signals return. 
|
|
#4
10-10-2012, 11:23 AM
|
||||
|
||||
|
Quote:
These are good videos you made. I have a question: What metal is the surface of the chain that we see? It looks like silver. Is this 900 silver and 100 copper? Is it silver plate? Or is it solid silver? Or is it some other metal? Best Wishes, J_P
|
|
#5
10-10-2012, 11:44 PM
|
||||
|
||||
|
Quote:
|
|
#6
10-10-2012, 11:54 PM
|
||||
|
||||
|
Quote:
The PDK-2 is the UPGRADE passive receiver we have in the secret forum,is nothing special,anyway with my modifications is a real LRL. There are some people who found AC silver and gold with PDK´s,very nice if they put here pictures of objects,others (only two person) said not found nothing yet. I believe if someone found one large treasure with PDK,give me reward, 1% is OK.
|
|
#7
10-11-2012, 06:39 AM
|
||||
|
||||
|
Quote:
__________________
Geo
|
|
#8
10-11-2012, 06:54 AM
|
||||
|
||||
|
Quote:
Can you tell us how many cm deep is the deepest part of the silver chain buried? Best Wishes, J_P
|
|
#10
10-12-2012, 01:12 AM
|
||||
|
||||
|
Quote:
The Alonsos PD also locate the target, 1,00 m only,the PD was working fine when it was present the VHF waves,even with critical calibration not go more than 2,00 m.
|
|
#12
10-14-2012, 10:22 AM
|
||||
|
||||
|
|
|
#13
10-14-2012, 10:43 AM
|
|||
|
|||
|
hi morgan.the pdk2 can locate and other metals like cooper or zink?
|
|
#14
10-14-2012, 11:52 PM
|
||||
|
||||
|
PDK-2 INSTRUCTIONS
Quote:
here i put the PDK-2 instructions : INSTRUCTIONS : The TUNING knob must be all the time on the triangle mark,is the full power. The FINE TUNING it must be completly to the left position when you switch ON the PDK , and slowly rotate to the right until start the beeps in the marked area,then you need to calibrate the LRL to the critical point when your finger touch the knob and emit intermitent beeps it means is ready for search,and time to time check with finger if is sensitive,if emit the beeps,sometimes need little adjustments when batteries go low. Use ALKALINE batteries,or 9V rechargeable,never 10V batt. The batteries can stay 2 or 3 hours,check the batt. condition by pressing the little knob,while pressing if RED LED stay open it means low batteries,change batteries. Very important : when the PDK is ON,your MOBILE must be OFF to avoid interference. If people stay in front of PDK will mask the buried metals PHENOMENON,people must stay behind the PDK,when you searching. It will locate only Gold/Silver.
|
|
#15
10-15-2012, 12:02 AM
|
||||
|
||||
|
Quote:
some questions : 1-I see you get the PDK-2 ,is better than the PDK-2.2 ??? 2-And what stange modification you made on your PDK-2.2 in the FINE TUNING knob,it works better like this ? 3-What about LRL findings ? regards
|
|
#16
10-15-2012, 08:37 AM
|
||||
|
||||
|
hi morgan
1- i have question about this : the fine tuning in pdk-2 right turn open sensitivity and left turn close sensitivity??? 2- this modification is to protect the fine tuning not turn without my order when i put it in any place 3- when i m find something like this i give you 10% [IMG=http://imageshack.us/a/img27/5924/10015671.jpg][/IMG] here one more photo from the mouth of the tunnel about 500 meters long. in the tunnel with 100% hummidity the pdk-2 and the pdk-2,2 are very silence without any problem. except targets [IMG=http://imageshack.us/a/img6/6759/10015571.jpg][/IMG]
|
|
#17
10-15-2012, 12:20 PM
|
|||
|
|||
|
|
|
#18
10-15-2012, 03:55 PM
|
||||
|
||||
|
Quote:
1-chek if the FINE TUNING arrow is Clockwise or Anticlockwise,this is the position . 2-Yes,very good to protect the knob,but not forget that everytime you turn PDK´s ON the FINE TUNING must be in ZERO position and then proceed the calibration,otherwise the PDK will be erratic or out of tune. 3-Thats great,good luck for you and your friend. Regards
|
 |
|
|
Linear Mode
