LRL Frequence of Gold

[Gene-Yo]

Does anyone know the frequency in hz or khz that these LRL devices use for finding gold?

I see two main techniques: 1. Use of speaker to output a signal 2. Use of inputting a signal into the ground

[sweatofglory]

Originally Posted by Gene-Yo

Does anyone know the frequency in hz or khz that these LRL devices use for finding gold?

I see two main techniques: 1. Use of speaker to output a signal 2. Use of inputting a signal into the ground

try 630hz,610hz, 5khz,59khz

[rajesh]

Originally Posted by Gene-Yo

Does anyone know the frequency in hz or khz that these LRL devices use for finding gold?

I see two main techniques: 1. Use of speaker to output a signal 2. Use of inputting a signal into the ground

i think 5khz good where is your schematic.............

[Gene-Yo]

Originally Posted by rajesh

i think 5khz good where is your schematic.............

I don't have a schematic but plan to get a variable frequency generator that will hit these various levels of output and use for short range testing. Is there something you would recommend?

[Geo]

Originally Posted by Gene-Yo

I don't have a schematic but plan to get a variable frequency generator that will hit these various levels of output and use for short range testing. Is there something you would recommend?

See at Carl's project. There is a good generator for rods working.
I take good signal for gold and good center at 4813.... 4900 Hz

[Morgan]

Originally Posted by Gene-Yo

Does anyone know the frequency in hz or khz that these LRL devices use for finding gold?

I see two main techniques: 1. Use of speaker to output a signal 2. Use of inputting a signal into the ground

59---62 KHz

[Fred]

So many frequencies... (sob) ... so litle time....

[strujas]

Originally Posted by Gene-Yo

Does anyone know the frequency in hz or khz that these LRL devices use for finding gold?

I see two main techniques: 1. Use of speaker to output a signal 2. Use of inputting a signal into the ground

Try with this
http://www.geotech1.com/forums/showt...frequency+gold


http://www.royalrife.com/metalfreq.html

METAL FREQUENCIES


This frequency list was researched by Dr. Toshihiko Yayama in Japan. He used the F-Scan with reagents and patients with known metal poisoning.

Frequencies have been rounded to the nearest 100 Hz. To test for metals, a DIRP is done from 30,000-60,000 Hz in 100 Hz steps. The mercury frequency has been confirmed by others. These frequencies are intended for research in detecting the presense of metals. They are not intended for use as treatment. Treatment should include chlorella and other materals as needed.

Arsenic 30400
Aluminum 31900
Beryllium 32700
Vanadium 32800
Titanium 35300
Thallium 36600
Palladium 37700
Lead 38000
Chromium VI 39200
Silver 43300
Mercury 43700
Magnesium 45300
Gallium 45400
Manganese 45700
Tungsten 47500
Lithium 47900
Indium 48300
Tantalum 48900
Rubidium 49200
Molybdenum 49800
Nickel 55200
Zinc 56200
Cobalt 56300
Iridium 57000
Cadmium 57300
Copper 58600
Gold 59000
Osmium 59200
Platinum 59300
Tin 59700

[Theseus]

Very sorry to report to you, but the notion that buried metals respond to, or give off a specific frequency, is a total fabrication -- a myth.

What's more, you will never ever find two dowsers that will agree on the same exact frequency. The reason for this is really quite simple. You see, these so-called frequencies were all derived empirically by the individual dowsers themselves; hence no two are alike.

The idea that buried metals respond to certain frequencies is perpetrated by LRL salesmen, ie. Wallet-miners and scam artists. The theory (bogus as is might be) has netted a few Wallet-miners many hundreds of thousands of dollars in stolen cash from those who covet the idea as truth.

Why do you think there are so many replies above that read; "...try 6.5 kHz, or try 19.6 Hz, or try 128 mHz, and on and on" ???

The answer is because you can literally try any frequency you like, or NO frequency at all; and you will of course come up with the exact same results every time. Of course if you try enough different frequencies, eventually you will find something that resembles the metal you were looking for, and then that "frequency" will become the one that you swear by.

The idea of "specific frequencies" is all part of a grand mind game and a marketing scheme repeated and repeated by the Wallet-miners and scam artists that prey on the gullible and technically-challenged.

You can forget about "frequencies", and just go out and do your dowsing without them, and you will not lose as much cash and you will have the same results with or without the use of "frequencies".

Rest assured, the only people who have ever profited from the use of "frequencies to find metals", are those scam artist LRL salesmen that sell the stuff. What they are doing is called Fraud through Willful Deception, and it is a crime.

[sweatofglory]

For me choosing the right frequency plus a good pair of rods if you are using mfd makes the difference. i am using frequency that only detects buried object(1 gm and above). gold dust no more

[rajesh]

Originally Posted by sweatofglory

For me choosing the right frequency plus a good pair of rods if you are using mfd makes the difference. i am using frequency that only detects buried object(1 gm and above). gold dust no more

dear if you has an treasure location simply yuo go there and keep a radio on sw band and sighlytly walk around area togerther adjust tune frweuency i think have found near 17.5 mhz better responce ......

[Fred]

Originally Posted by rajesh

dear if you has an treasure location simply yuo go there and keep a radio on sw band and sighlytly walk around area togerther adjust tune frweuency i think have found near 17.5 mhz better responce ......

Must be a VERY big treasure, right ?

[sweatofglory]

Originally Posted by rajesh

dear if you has an treasure location simply yuo go there and keep a radio on sw band and sighlytly walk around area togerther adjust tune frweuency i think have found near 17.5 mhz better responce ......

ok tnx my friend i will test it. will let you know the result

[Gene-Yo]

Thanks for all of the replies everyone.

Has anyone ever figured out what type of signal the gold is supposed to exhibit when you input a certain frequency into the ground or air? Most people talk about L or dowsing rods but that doesn't explain the signal. Any ideas such as a weak electrical field which should be magnetic or what??

[Theseus]

Originally Posted by Gene-Yo

Thanks for all of the replies everyone.

Has anyone ever figured out what type of signal the gold is supposed to exhibit when you input a certain frequency into the ground or air? Most people talk about L or dowsing rods but that doesn't explain the signal. Any ideas such as a weak electrical field which should be magnetic or what??

You won't find a consensus as to the type of signal that gold is "supposed" to exhibit because gold does not produce a signal of any type (when a frequency is radiated into the nearby ground or air). It is a physical impossibility.

If there were a "sympathetic radiation" produced, as you've been told and you obviously believe, there would be no reason at all to employ hand-held error-prone dowsing rods as a sensing device. Not to mention the fact that all the Physics texts (and axioms) in this world would need to be re-written.

[Dell Winders]

Sam, are you still jealous that LRL's work better than your fancy Dowsing Pendulums you were selling for high prices? Dell

[Theseus]

Originally Posted by Fred

Must be a VERY big treasure, right ?

Yes, a very big treasure, or on the other hand, it could be a transmitter of some kind emitting a "real" RF signal of the frequency being listened for.

[Clondike Clad]

Originally Posted by Dell Winders

Sam, are you still jealous that LRL's work better than your fancy Dowsing Pendulums you were selling for high prices? Dell

DELL YOU ARE DOING THE SAME!!!!!!!!!!!!!!

[Theseus]

Originally Posted by Clondike Clad

DELL YOU ARE DOING THE SAME!!!!!!!!!!!!!!

Dell, thinks it is okay for him to do whatever he wants. He believes he is immune to and exempt from all the laws of the land, simply because he has gotten away with his deceptive marketing schemes for so long. Dell needs to pay more attention to what just happened to his buddy Bob Yokum.

Sometimes it is slow, but eventually justice will prevail.

[Dell Winders]

Originally Posted by Dell Winders
Sam, are you still jealous that LRL's work better than your fancy Dowsing Pendulums you were selling for high prices? Dell

Sometimes it is slow, but eventually justice will prevail.

You are right about that, Sam. I see you are hiding behind another deceptive alias and trying to control your jealous prejudice so they don't come after you, Again.

My claims are always honest & truthful, and have evidence to support, You have already taken your best shots to no avail. You don't have a Scientific leg to stand on, which you are surely aware of by now. Your slander is contrived, and as bogus as your pretense to be who you are not.

It's very unlikely that Mr. Yokum, considers me a buddy of his. That's only in your imagination. Dell

[Theseus]

Originally Posted by Dell Winders

You are right about that, Sam. I see you are hiding behind another deceptive alias and trying to control your jealous prejudice so they don't come after you, Again.

My claims are always honest & truthful, and have evidence to support, You have already taken your best shots to no avail. You don't have a Scientific leg to stand on, which you are surely aware of by now. Your slander is contrived, and as bogus as your pretense to be who you are not.

It's very unlikely that Mr. Yokum, considers me a buddy of his. That's only in your imagination. Dell

Once again your paranoia is affecting your mind, Dell. Sam??? I don't see any posts from Sam. Me hiding??? Who is hiding??? My user name is Theseus, and is no different from all the other user names on here. You seem to be really taken with this Sam fellow from your past. He must've done you some real dirt somewhere along the way; probably many years ago, the way your mind works. If he ever stops by here, I'd like to shake his hand buy him a beer and congratulate him for a job well done.

And if Bob is not your buddy, at least he was in the same business you are in; only he got hauled into court. Just something for you to think about.

[rajesh]

dear Fred
yes actually im planed to built a tow box type locator simeller frequency near gold...

[rajesh]

dear sweatofgl go as soon as but you shuld be use a plastic handle and aportable antena near a old bueired treasure location........

[Seden]

Theseus,

Physicist Dr.Paul E. Dobler in his experiments with high end millimeter waves found that all materials give off radio waves,hence the millimeter wave passive security cameras in use today. He measured gold's frequency at 1.2mm or 249GHZ.
This was done in the turn of the last Century after Sir Jagadish Chandra Bose's experiments with lower millimeter waves,both using the same primitive lab equipment at the time.

If you want to find out about this goto http:www.addall.com, click on used books and type in the Author space Paul E. Dobler and you will see 1 copy of his condensed book in eng. and 2 auf deutsch which contains detailed info complete with photographs which I bought and highly recommend and they are both around $50 from a bookstore in Austria (which is strangely enough where I bought my copy).
Get informed,

Randy

[Theseus]

Originally Posted by Seden

Theseus,

Physicist Dr.Paul E. Dobler in his experiments with high end millimeter waves found that all materials give off radio waves,hence the millimeter wave passive security cameras in use today. He measured gold's frequency at 1.2mm or 249GHZ.

Isn't that interesting, especially in light of the fact that most LRL/MFD contraptions are utilizing frequencies in the Audio Spectrum; that is Hz and KHz. Something doesn't quite add up here, wouldn't you agree? Next thing somebody will tell me is that they are using "harmonics" of the GHz frequencies. I've heard it all. Incidently, if buried metals were giving off frequencies there would be NO reason at all to sense them with error-prone dowsing rods. Someone would have designed a simple receiver to detect the aforementioned frequencies, and there would be very few buried treasures left in the ground. So far that hasn't happened. Hmmmmm.... curious.

Incidently, if getting informed means I would have to invest in a library of esoteric/occult books about pseudoscience and other things that go bump in the night --I'll leave that to you and your friends of a similar ilk. If you really enjoy those kinds of "far out" topics, I suggest you research the Rife Instruments, Radionics boxes and the work of Pierre Beasse. When you get totally informed on that topic, the next one I would suggest you investigate would be Orgone Energy, Orgone Accumulators and the experiments of Wilhelm Reich.

BTW, I think Walmart is currently running a special on aluminum foil; and you'll probably need quite a lot of it once you start building your orgone accumulator.

Birds of a feather flock together.........