Mineralisation, el.field electromagnetic field problems

[Mike(Mont)]

That?s not sound going through the wire

[Avanturis]

Originally Posted by Mike(Mont)

That?s not sound going through the wire

What is that??

[Mike(Mont)]

How?s that electronics course going?

[Mike(Mont)]

Anybody used the Gold x-finder? I see they just made an update. gdi-detectors.com

[Mike(Mont)]

When measuring target size, you really need to be close to the target for better accuracy. Del Winders said within 50 feet/ 20 meters. Longer distance gives exaggerated target size

[Mike(Mont)]

About electrical shock?One of Del Winders weight chek units gave someone a bad shock. It had a 555 timer circuit to provide a frequency that ran through the rods. He discontinued that one.

Just a micro hole in your skin can allow current to flow inside your body? that?s how people eat electrocuted. A micro hole can occur from a static electricity spark. Don?t be foolish and get yourself killed.

[Mike(Mont)]

I also should add that Del?s weight chek did not have an amplifier and still gave the guy a bad shock

[Mike(Mont)]

Also just can?t let this one slip by?This is not dowsing! The original MFD devices did not use any L-rods, just like the electronic receiver I?ve been working on. But you can use L-rods to trace the signal line-Del Winders figured this out. Usually I can find two signal lines that go to each edge of the target? s field. There is also a line right to the target but it not as easy to detect until you get up close.

[Avanturis]

Hi Mike, how are you?
It's been a long time since I haven't written here, I want to ask you and the other members of the forum, I'm just asking, i.e. I'm learning from you professionals
Have you used Spectra or Rayfinder from GDI from Greece, and is it worth investing in those locators or not?
Best regards

[Mike(Mont)]

Never used those but I have an Eliminator e-120 I like so I highly suspect the Spectra and Rayfinder are going to be better yet.

Many people afraid of L-rods but I am living proof to the fact anyone can learn LOL. Best way I have found is to pick out an object out in front of you a ways and look at it while you using the rods. The idea is to take your mind off the locating stuff— can’t be thinking about it. Keep your conscious mind out of it. Many people cannot do this

[Avanturis]

Originally Posted by Mike(Mont)

Never used those but I have an Eliminator e-120 I like so I highly suspect the Spectra and Rayfinder are going to be better yet.

Many people afraid of L-rods but I am living proof to the fact anyone can learn LOL. Best way I have found is to pick out an object out in front of you a ways and look at it while you using the rods. The idea is to take your mind off the locating stuff? can?t be thinking about it. Keep your conscious mind out of it. Many people cannot do this

Thanks again Mike for sharing your experience

[Mike(Mont)]

Another technique which is more like dowsing is to aim two L-rods straight in front of you and slowly do a sweep through the suspected target area. When you are aiming at the target the rods cross.

And another variation of this is to hold left thumb on top of rod so it doesn’t move. Right rod is free to move. Do a two-rod sweep while focusing your attention on the left rod. When the right rod starts to catch a target notice where the left rod is aiming. This takes practice to keep all you attention on the left rod. This one works pretty good.

[mustefa ubram]

Originally Posted by Avanturis

Thanks for your reply
I have no knowledge of electronics and I want to research and learn from some who have many years of experience so I ask here on the forum to find out more about generators

Dear friend I suggest you to learn some electronic science first to understand the content better and easier.
To eliminate errors, you can use Eliminator-e120 or MES-x2 from Deep Finders.These two devices are designed to eliminate electromagnetic noise
G.L

[Mike(Mont)]

Looks interesting. Can't see the price.

[mustefa ubram]

Originally Posted by Mike(Mont)

Looks interesting. Can't see the price.

What is the price?

[Mike(Mont)]

How much does it cost?

[mustefa ubram]

Originally Posted by Mike(Mont)

How much does it cost?

You can get help from the company's support

[Mike(Mont)]

Doesn?t look like Deep Finders is still doing business. A bit strange they do not mention anything needing L-rods.

[Avanturis]

Originally Posted by mustefa ubram

Dear friend I suggest you to learn some electronic science first to understand the content better and easier.
To eliminate errors, you can use Eliminator-e120 or MES-x2 from Deep Finders.These two devices are designed to eliminate electromagnetic noise
G.L

Hello
I appreciate your suggestion, thank you for your help me.