ALONSO PD MISSION ACCOMPLISHED V1,V2

[aft_72005]

Originally Posted by abdou2014

electromagnetic waves

Hi
In my Region .. there are gold and uranium mine ? also say me those frequency?s!!!!!!!
Best regards.

[aft_72005]

Originally Posted by J_Player

What electronic device do you want to know the frequency of?
The human eye detects frequencies from 430 trillion hertz, seen as red, to 750 trillion hertz, seen as violet. But the eye is not a buried metal, or a manufactured electronic device. So we may look at some manufactured electronic devices which have lower frequencies like toasters, which operate in the frequency range of 30 thz. But even that is too high to detect metals from long range. So perhaps we should look at modern radio transmitters.

They generally transmit between some gigahertz to less than 1 Hz, depending on the application. Most geophysicists look for vlf or ulf frequencies to determine contents under the ground. This means they build their machines to transmit or receive frequencies between 2 hz and 100 khz to detect things in the ground. But remember... their machines are not related to buried treasure, they are only machines that transmit and receive on these frequencies. Any coincidence of finding treasure or gold deposits is simply a coincidence, and has noting to do with the design of their equipment.

This is because we are talking about electronic devices, not about buried metals.
After all, who would want to use an electronic device to find buried metal?

Best wishes,
J_P

Hi J_P
This method only determine big amount of mass .. no detect one gold coin !!!!!
Best regards .

[abdou2014]

Originally Posted by aft_72005

Hi
In my Region .. there are gold and uranium mine ? also say me those frequency?s!!!!!!!
Best regards.

you can locate uranium with a geiger counter

[aft_72005]

Originally Posted by abdou2014

you can locate uranium with a geiger counter

Yes I know !!!! ? in your research ?.is gold produced magnetic or electromagnetic field ?

what frequency emitted by gold?

[abdou2014]

I don't have an exact frequency yet , it depends on the power of the radio transmitters in the area

[abdou2014]

MY MINEORO

[abdou2014]

[Geo]

Originally Posted by abdou2014

MY MINEORO

What is the so exotic and you hidd it ??

[Hosin@2021/shahroee]

Originally Posted by Hosin@2021/shahroee

Qiaozhi s diagram is correct

Qiaozhi s diagram

[abdou2014]

Originally Posted by Geo

What is the so exotic and you hidd it ??

PCB , I intend to add a stimulator, do you have a suggested frequency ?

[Geo]

Stimulator at Mineoro schematic??? No good idea!!

[abdou2014]

thanks for the advice

[JHERICKU]

Originally Posted by Hosin@2021/shahroee

Qiaozhi s diagram

Thank u for ur kindness..

[Geo]

Diagram is ok but it is a very difficult project especially the ferrite nulling.
I don't suggest it to you.

[abdou2014]

I need to know what is the diameter of the wire and the number of turns inside the ferrite core of mineoro antenna ?
I know the inductance is 2 mH but I have a problem with my LC meter , Thank you !

[Geo]

Αlthough i don't remember exactly the turns, they depends from pot core's Al.

[abdou2014]

Thank you .

[abdou2014]

I have another question if you allow, in my region the transmitter is located in the north, in which direction I should search with my LRL?

[aft_72005]

Originally Posted by Morgan

the price for this PD is high,its not possible to make it 100% stable,it drift,this is big price for that kind of locator,the original cost 2.000 dollars the clone 20.000 dollars.
yes it work as a treasure locator but at short distances of only a few meters as Geo confirm this behavior when play with the PD here in my field test,there are videos showing that.

I built the PD Alonso in 2010 and it worked. But the problem was instability. at that time, I believed that the original PD you have also has drift and is unstable.
Whenever I have the time, I will work to fix its instability problem.

[abdou2014]

Originally Posted by Geo

What is the so exotic and you hidd it ??

ITS EXOTIC SECRET
NOW I WORK WITH NEW TECH LRLs CREATED BY ME

[Geo]

Originally Posted by abdou2014

ITS EXOTIC SECRET
NOW I WORK WITH NEW TECH LRLs CREATED BY ME

Congratulation.....

[Geo]

Originally Posted by aft_72005

I built the PD Alonso in 2010 and it worked. But the problem was instability. at that time, I believed that the original PD you have also has drift and is unstable.
Whenever I have the time, I will work to fix its instability problem.

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

[abdou2014]

Originally Posted by Geo

Congratulation.....

Thank you dear friend , It's true that it took me a while to understand, but now everything is clear

[aft_72005]

Originally Posted by Geo

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

Did your PD Alonso also have instability?
In my opinion, the original PD Alonso must also be unstable. In the films that you and Morgan recorded in Portugal.. all the films are only a few seconds and at most a minute... the PD is being processed and explored... there is no film that is being processed and explored for 10 minutes.
Yes, I have very precise measuring equipment.
The use of high-beta transistors in the form of Darlingtons is one of the reasons for the PD's instability.

[aft_72005]

Originally Posted by Geo

The solution is very good components quality. The voltage drift of PS must be lower than 1mv and on base of T13 only few uV. You need a multimeter 5 1/2 digits to check it. After it PD is coming very stable.

Next item. Morgan reads the messages here but doesn't respond.
Morgan said that the PD can detect a coin from 30 cm. For an Omega coil with a diameter of 10 cm, this is an unusual detection distance!!! Did you test in Portugal to see from what distance it could detect a coin?