locator new generation

[Mike(Mont)]

Sorry, I am no expert. I say a pulse wave will not work for the frequency discriminators, but I could be wrong...again.

[abdou2014]

Thank you !

[dragomir]

one more time I'll say it - scalar waves have impulsive character. pulse frequency causes resonance. As electromagnetic waves resonate so resonate and information, but these properties are close to the properties of light.

[Mike(Mont)]

I'm not saying a pulse cannot possibly work, just that it is not going to work like a frequency discriminator. Look at the way a pulse metal detector works--it detects all metals but it's most sensitive to iron. So maybe you are talking about something totally different. Maybe you are talking about dowsing?

[abdou2014]

http://jnaudin.free.fr/html/sclxmtr.htm

[Mike(Mont)]

What I see is a frequency generator and scalar antenna. I've built the Mobius type coil. Not much difference than plain old ground/air probes. But never tried this design and didn't use an amp. Been a long time ago.

[Mike(Mont)]

That guy says use at your own risk. Scalar waves are absorbed by the human body and Meyl talks about it. I would say that amplifier is where the danger is. So be very careful because it probably is dangerous to your health. Read up on it first so you know what you are getting into.

[Mike(Mont)]

jnaudin.free.fr/spgen/

Here's some more info on that device.

Here is more info:
www.overunityresearch.com/index.php?topic=754.0

[Mike(Mont)]

Here's a video about how scalar waves can affect human cells. This is just a starting point for your research on the safety of scalar waves. After watching this video I think that jnaudin device looks very dangerous--way too power.

https://www.youtube.com/watch?v=9AFY3QItrRg

[Mike(Mont)]

This is a very interesting video. Meyl talks about the structure of DNA and how the magnetic field of the electron orbits acts as an antenna. In one of his books, Meyl says the power from the transmitter must be turned down so the LED lights are no brighter than the LED's on the receiver. Otherwise the energy can be absorbed by biological systems. The optimal point is when the receiver lights start to dim. This is a tiny amount of power. Sorry I don't have a number, but very minimal. It takes 2 volt to light the LED's, don't know how many milliamps, but it can't be more than a few. The jnaudit device uses 12 volts up to 5 amps. You sure don't want to hold that device up near your face.

BTE, just got an emailing from Meyl this morning, says there is an English Scalar Wave conference early March