Post photo of your LRL project?

[J_Player]

Originally Posted by Robert

I really dont have a clue what really do you want? You want to detect coin at 40 meters distance (or whatever) but you dont have clear concept how to do that.

I do not want to build a LRL for the purpose of hunting for coins. I want to build a detector similar to Esteban style coil detectors so I can make independent tests to see if it responds to actual buried metals like he says it does.

What I am looking for is a detector like Esteban uses except built using calculations rather than simple experimenting with old radio circuit boards. From what you said, it is not possible to build a detector similar to Esteban's coil transmitters and operate a receiver at the same time. I do not know how he managed to run a coil transmitter without smoking his receiver, but he says he did. From this I must conclude the only possible way to construct one of these is by using the method Esteban uses.

However, that is impossible too, because Esteban has never posted a complete schematic with coil details that would permit building the style coil detectors he uses. I guess this means nobody will ever make any independent tests to see if his detectors work. The closest we have seen is Morgan's report of a detector made by Alonso, But Mogan's report was only for a few examples of what he saw. not the kind of testing to show what electrical signals were in the circuitry when it made beeping noise.

So we will continue with no information of how to test the reports of detecting buried metals at long range because it is said to be impossible.

Best wishes,
J_P