LongRangeLocators Forums  

Go Back   LongRangeLocators Forums > Main Forums > Long Range Locators

Reply
 
Thread Tools Display Modes
  #101  
Old 05-02-2020, 11:55 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

NOW I UNDERSTAND , THE RADIO AND STIMULATOR WORK LIKE A BFO + ZAHORI
Attached Images
 
Reply With Quote
  #102  
Old 05-03-2020, 12:33 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
at the beginning i think understand the stimulator was an RF radio, and now i read that the receiver is the radio, explain me :

is the radio the receiver or is there another receiver ?

I think there is a receiver, and the radio is the stimulator, but I don't think I saw a ferrite

antenna for AM radio ???
there is a receiver circuit with a stimulator oscillator with a coil behind the RX antenna that can use a gold sample for resonance (each metal resonates at specific frequency) , that circuits can work as LRL but cant react to small objects, however the radio circuit is a optional upgrade for more sensitivity to small targets.
Reply With Quote
  #103  
Old 05-03-2020, 12:35 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
Thank you , is the stimulator an AM or FM radio, and should it be tuned near a radio station ?
sorry , its a FM RADIO, not the AM told before,my mistake
Reply With Quote
  #104  
Old 05-03-2020, 12:47 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
NOW I UNDERSTAND , THE RADIO AND STIMULATOR WORK LIKE A BFO + ZAHORI
oh man, see how you are completly wrong ...

if I told its not a zahori , becouse is not, ok !?

circuit near the batteries, BATTERY CHECK,one LED open (low batteries), two LED open (change batteries)

circuit in horizontal position,its the FM RADIO,there a variable cap. to tune for the correct resonance frequence

circuit behind the antenna its the receiver and together is there a oscillator circuit where the horizontal coil is connected

little cilinder is the buzzer

example of this kind of LRLs ,you have the DCH85, The ICONOS,the Blue PD of Esteban...

Last edited by Morgan; 05-03-2020 at 12:58 AM. Reason: some mistake in the answer
Reply With Quote
  #105  
Old 05-03-2020, 12:52 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
NOW I UNDERSTAND , THE RADIO AND STIMULATOR WORK LIKE A BFO + ZAHORI
oh man, see how you are completly wrong ...

if I told its not a zahori , becouse is not, ok !?


circuit in horizontal position,its the FM RADIO,there a variable cap. to tune for the correct resonance frequence

circuit behind the antenna its the receiver ,near batteries there is the oscillator circuit where the horizontal coil is connected

BATTERY CHECK,one LED open (low batteries), two LED open (change batteries)
little cilinder is the buzzer

example of this kind of LRLs ,you have the DCH85, The ICONOS,the Blue PD of Esteban...
Reply With Quote
  #106  
Old 05-03-2020, 10:49 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

I UNDERSTAND :

A RECEIVER + FM RADIO + STIMULATOR,

YOU TOLD THAT THE RADIO IS OPTIONAL FOR MORE SENSITIVITY FOR SMALL TARGETS .

THE ANTENNA POSITION IS CORRECT IN THE PHOTO OR THE RECEIVER IS MAGNETIC WITH

A FERRITE ???
Reply With Quote
  #107  
Old 05-03-2020, 10:51 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

PHOTO
Attached Images
 
Reply With Quote
  #108  
Old 05-04-2020, 06:01 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

Mr Morgan ???
Attached Images
 
Reply With Quote
  #109  
Old 05-05-2020, 12:48 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
PHOTO
thats correct

and the 57pf was connected after a previous test with a variable capacitor near the gold medal that shows this 57pf value is the one for the best distance on the target ,then is to put a fixed cap.
Reply With Quote
  #110  
Old 05-05-2020, 12:51 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by abdou2014 View Post
Mr Morgan ???
no ferrite in this LRL, this is the noisy buzzer
Reply With Quote
  #111  
Old 05-05-2020, 01:31 AM
Morgan's Avatar
Morgan Morgan is offline
Guru
 
Join Date: Nov 2007
Posts: 2,629
Default PDK-3

Quote:
Originally Posted by kostas87 View Post
Hi Morgan,I'm not sure at all, but I think a long-time buried metal is an RF to DC collector, and above the magnetic lines n-s the (microvolt) sit above and we have some distance.
I was thinking about the N-S magnetic lines you told, here we see a video where I pinpoint a target( it was found a gold ring) and the target emit signal direction N to S (clear signal) and W to E (clear signal) and S to N (weak signal) and E to W (no signal) that hapens very often but is some ocasions gold objects produce signals in all directions. I believe the nanovolts are somewere around the targets ,floating trew the magnetic lines,but not understand why they sometimes cant be located in all directions,whats hapening ? If someone here understand about this Phenomenon,maybe can explain,thanks.

https://www.youtube.com/watch?v=X9fR_gBbp50
Reply With Quote
  #112  
Old 05-05-2020, 02:04 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

Thank you mr Morgan , still two questions !
Attached Images
 
Reply With Quote
  #113  
Old 05-05-2020, 04:55 AM
zakari's Avatar
zakari zakari is offline
Senior Member
 
Join Date: Oct 2016
Posts: 124
Default

Hi abou 2014

In that picture inner loop is like the dch 85 but that is not complete
look at the stephan gold sensor in this forum and oro & plata in the dch85


best regard
zakari
Reply With Quote
  #114  
Old 05-05-2020, 05:09 AM
zakari's Avatar
zakari zakari is offline
Senior Member
 
Join Date: Oct 2016
Posts: 124
Default

HI MORGAN
I made a clon of your pdk with transmitter that is work well
thank you so much for your helps and information in this forum
I Believe the pdk is one of the best lrl in this forum

best regard
zakari
Reply With Quote
  #115  
Old 05-05-2020, 09:43 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

Thank you Zakari , Morgan I saw in your youtube chain that you also built an IR LRL, very interesting, I also have an IR LRL version on the right and my left sample antenna
Attached Images
 
Reply With Quote
  #116  
Old 05-05-2020, 09:57 AM
zakari's Avatar
zakari zakari is offline
Senior Member
 
Join Date: Oct 2016
Posts: 124
Default

hi abdou 2014
in the left your big loop is the rc concentrate loop like the minero small loop

but the inner loop with sample is'nt correct and not complete
morgan knows my mean


best regard
zakari
Reply With Quote
  #117  
Old 05-05-2020, 10:49 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

why you stopped here, continue ????
Reply With Quote
  #118  
Old 05-06-2020, 01:45 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

I hope to have an answer from Morgan ?????
Attached Images
 
Reply With Quote
  #119  
Old 05-07-2020, 05:24 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

Mr Morgan , I built the TDA with the DCH circuit and with the LM386 and I noticed that with

LM386 has more sensitivity !

did you get the same result ???
Attached Images
 
Reply With Quote
  #120  
Old 05-07-2020, 05:29 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

I also noticed that with the DCH display there is no need for an audio transformer, I made all

the versions and I learned a lot with the modifications !
Reply With Quote
  #121  
Old 05-07-2020, 05:33 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

Mr Geo said in the forum that the sensitivity should be in the variable LM317 power supply for

15V, I don't know if you did the same thing ???
Reply With Quote
  #122  
Old 05-08-2020, 02:48 AM
GOLDEN LILLY's Avatar
GOLDEN LILLY GOLDEN LILLY is offline
Senior Member
 
Join Date: Oct 2005
Posts: 147
Default

Hi, I think this lrl of morgan is a static field detector...It is evidence by a wood case....Plus there is also a magnetic receiver via ferrite antenna...everything is excited by a stimulator...stimulator is important to create capacitive reaction...I also think that there is no fm receiver.
Its only my guess...
Reply With Quote
  #123  
Old 05-08-2020, 09:32 AM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

There are two electric loop antenna, one for TDA and one for DCH85 receiver , I don't think there is a magnetic circuit with ferrite ,
the question is : the TDA and 741 are in series or in parallel ?
looking at a photo of Esteban of the blue PD, there is an IC 8 that has been added to the TDA card, which means something
Reply With Quote
  #124  
Old 05-08-2020, 11:54 AM
GOLDEN LILLY's Avatar
GOLDEN LILLY GOLDEN LILLY is offline
Senior Member
 
Join Date: Oct 2005
Posts: 147
Default

What is the ferrite circuit? Is it pdk?
Reply With Quote
  #125  
Old 05-08-2020, 01:53 PM
abdou2014 abdou2014 is offline
Guru
 
Join Date: Mar 2014
Posts: 1,042
Default

In these two photos we can clearly see the addition of the PDK circuit with Ferrite to the DCH

but Morgan don't add this part to his LRL
Attached Images
 
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:52 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.