for Carl - NC , gold gun AL 707 or 718

[aft_72005]

Hi Carl - NC

Are you have report about gold gun AL707 or 718 ?

[Carl-NC]

I own a Gold Gun AL718. Couldn't get much out of it, and I've never heard of anyone else who has had success with one. Still, I'd like to get mine into an area where there's more natural gold, and see what it does. Based on what I know of Accurate Locators, I don't expect much of it.

- Carl

[aft_72005]

Hi Carl -N.C.

please upload here some picture from in side it

can you provide report seem as your other articles ?

i am interested that Gold Gun AL718 circuit how it work.

is it tuned low frequency receiver ?

thanks for all the trouble you have taken in the matter.

[jassim]

i'dont have manual the gold gun al707 or foctionne send me manual

[jassim]

my email is isslam428@yahoo.fr thx for help me

[med]

Originally Posted by Carl-NC

I own a Gold Gun AL718. Couldn't get much out of it, and I've never heard of anyone else who has had success with one. Still, I'd like to get mine into an area where there's more natural gold, and see what it does. Based on what I know of Accurate Locators, I don't expect much of it.

- Carl

i'dont have manual the gold gun al707 or foctionne send me manual

[med]

Originally Posted by aft_72005

Hi Carl -N.C.

please upload here some picture from in side it

can you provide report seem as your other articles ?

i am interested that Gold Gun AL718 circuit how it work.

is it tuned low frequency receiver ?

thanks for all the trouble you have taken in the matter.

[Carl-NC]

Yeah, I need to dig this thing out and see what it does. Med, I'll try to get a photocopy of the manual made. You could probably get the correct (707) manual from Accurate Locators.

- Carl

[med]

Originally Posted by Carl-NC

Yeah, I need to dig this thing out and see what it does. Med, I'll try to get a photocopy of the manual made. You could probably get the correct (707) manual from Accurate Locators.

- Carl

thanks carl i am realy need your help so please send me the photocopy of manual

[vcrb]

Carl seems reluctant to say anything about Accurate Locators & even OKM ? Both outfits sell LRLs and questionable equipment. He even allows MINEORO dealers to endorse their products all over his forums. Not one single report on any of these three manufactures and Carl admits he has these locators ? Perhaps Mr. Carl Moreland is being paid by these manufactures? Always have wondered about his agenda???

vcrb

[med]

Originally Posted by med

thanks carl i am realy need your help so please send me the photocopy of manual

hello carl iam still waiting the manual of gold gun al 718 please send me it thank you

[Jonas]

Gold Gun AL718

[aft_72005]

Hi Carl
Please upload some picture form inside of gold gun AL718 .
Best regards .

[Carl-NC]

The internal circuitry is coated with white paint, so there is nothing to see.

[FC247]

Are there any parts recognizable inside?

[Carl-NC]

Don't remember, I'll pull it back out and take some pics.

[Tim Williams]

I'll open the gold gun I have and see if it has white paint. If not I will post some pictures. I don't remember if it has paint inside or not.

Tim

[Seden]

Tim,

What has been your experience with the Gold Gun?

Randy

[aft_72005]

Hi to all
Tim Williams , I am waiting see more about gold gun.
Carl, thank you.
Any body know about electronic section of gold gun?
Is it ion detector? Or is it long wave receiver ?

[Tim Williams]

Guys I will look at it today. It appears to be in the AM range. I will post some pictures also. The only responce I ever saw was North south line detection. If I turned the unit pointing either to the north or south I get a drop in digital value. Someone sent it to me to play with. He just purchased a mineoro unit. I will have it soon to play with and test.

Tim

[Tim Williams]

Ok I looked at the unit I have here and the model is the 718. The board did not have paint on it so I made a schematic on the board. I need to check it again. I did not get to open the antenna yet. I will out today but will post tonight. I will tell you this. There are 2 jfets, HA17324 and filters. Not much more than that.

Tim

[Tim Williams]

Here is the pictures and schematic. Carl let me know if your is different.

http://lrlman.com/GG.zip

Tim

[Seden]

Tim,

Thank you for going to the trouble in what you produced. Very interesting. Makes me wonder if their detecting the VLF Radio Stations carriers. With enough limiting you can really dig carriers out of the noise with a good filter on the output to clean up the harmonics. I've had real good luck using them on my loop antennas for the 160-190 KC license free band.

Do you have an inductance meter so the resonant frequency can be found out? This is the key obviously to seeing what the designer had in mind,but I'm betting on VLF beacons like the WADI receivers.

What say ye Carl?

Randy

[FC247]

thank you for the pictures and circuit description Tim Williams. Very good information.

[aft_72005]

Hi Tim Williams
Ok, thank you. it is very good reverse engineering also you working fast.
Please upload more pictures , specially from coil section .
Are you test it in real ? can you find gold and silver with it?
How much coil inductance ?
Best regards .