A theory-Please comment

[jack]

hi to all
1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?
2-This reaction can be downloaded by Lrod??
3-Who has the schematic for LROAD brass rods of land to filter some streaks?
4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?
5-What do you recommend brass rods for the circuit?
6-Brass rods should be dealt with whether the man is or insulation?
WHITH RESPECT
JACK

[WM6]

Originally Posted by jack

hi to all
1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?
2-This reaction can be downloaded by Lrod??
3-Who has the schematic for LROAD brass rods of land to filter some streaks?
4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?
5-What do you recommend brass rods for the circuit?
6-Brass rods should be dealt with whether the man is or insulation?
WHITH RESPECT
JACK

In field of dowsing it is not about sort of dowsing rod.

Dowsing rods are only matter of personal preference.

It is all about dowser and his extrasense ability only.

If one has extrasense ability for unconscious perception some sign in nature which are usually overlooked by ordinary people, this one has dowsing predispositions, no matter of dowsing rod they used.

Extrasensing ability can be replaced by knowledge in natural science (geology, bothanic, chemistry etc.). In this case you even do not need dowsing rod to find undergrund water, mineral ore etc. You need only to observe carefully the surroundings natural phenomena and conclude on your knowledge basis.

[jack]

TANK YOU DEAR WM6
You did not answer my questions

[WM6]

Originally Posted by jack

TANK YOU DEAR WM6
You did not answer my questions

I think I answered in essence, if you understand what I am saying. In topic subject you asking for theory not for practical solutions.

In your question you are trying to mix L-rod with electronic remote detecting devices. It is not the same. L-rod is dowsing utility and technicaly cannot be treated as electronic remote detecting device. And, sorry, all your questions are not clear to me.

1-Do you send a low frequency, high voltage and amps to stimulate earth metals and their reaction is severe?

You do not need to do this. There are a broad band spectrum of frequencies from natural and artifical sources down to earth, that "stimulate" metals in soil. You need only to detect proper one and correctly explain what you detect.

2-This reaction can be downloaded by Lrod??

If you are extrasensor in ULF/VLF/RF spectrum, then YES, otherwise NO.

3-Who has the schematic for LROAD brass rods of land to filter some streaks?

I dont know, and I dont fully understand this question too.

4-What is the sensitivity of the orbital accuracy LROAD (brass rods) to the reaction was carried out by the brass wire is connected to the circuit?

I dont fully understand this question.

5-What do you recommend brass rods for the circuit?

I dont fully understand this question.

6-Brass rods should be dealt with whether the man is or insulation?

According most of dowsing theories: for proper dovsing, your body need to be in direct touch with Brass rods, without any insulation between your hand and brass (or other metal or wooden/best fresh/) rods. From science poits of view dowsing rods are only tools to help dowser keep concentration on matter.

[jack]

tank you very much
I want a circuit that is sensitive to signal the brass rods of metal which is located in the basement?
What is the phenomenon which occurs when the metal is brass wires underground will be multiplied to arrive?
I want to sensitize the orbital brass rods.Diagram is similar to that shown in the picture??same spectra lrl
please help me
with respect jack

[WM6]

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

[Morgan]

Originally Posted by WM6

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

[WM6]

Or if you prefer digital with sound in conjunction with LED (you need to isolate your hand from brass rods here too):

[WM6]

Originally Posted by Morgan

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

Maybe our friend "jack" know more .... people should be happy, so I gave him schematic.

[jack]

tank you very very much wm6
In general, what occurs when brass on metal wires are multiplied?
Circuits that what you are doing?
What do I have attached the circuit?

[WM6]

Originally Posted by jack

In general, what occurs when brass on metal wires are multiplied?
Circuits that what you are doing?
What do I have attached the circuit?

"multiplied?" - I guess nothing, you only have heavier dowsing rods.

No, I do not make this circuit - this is special schematic for born dowser only.

Connection points between circuit and dowsing rods are this:

[jack]

tank you dear wm6
For these circuits should be insulated with a brass rod?
his circuit, how to help brass rods for metal?
Reception rod is brass with more circuits?

[WM6]

Originally Posted by jack

For these circuits should be insulated with a brass rod?
his circuit, how to help brass rods for metal?
Reception rod is brass with more circuits?

Yes brass rod handle have to be insulated from your hand, otherwise circiut will not work.

Other questions are not clear to me, sorry. My English knowledge is too limited to decipher your words.

If you use translator, try to build as much correct sentences as you can in your native language, othervise translator give you (and me too) wordish nonsence.

[jack]

Originally Posted by WM6

Yes brass rod handle have to be insulated from your hand, otherwise circiut will not work.

Other questions are not clear to me, sorry. My English knowledge is too limited to decipher your words.

If you use translator, try to build as much correct sentences as you can in your native language, othervise translator give you (and me too) wordish nonsence.

njegov krog, kako pomagati medeninaste palice za metal?
Sprejem palica je iz medenine z več vezij?

[Geo]

Originally Posted by jack

tank you very much
I want a circuit that is sensitive to signal the brass rods of metal which is located in the basement?
What is the phenomenon which occurs when the metal is brass wires underground will be multiplied to arrive?
I want to sensitize the orbital brass rods.Diagram is similar to that shown in the picture??same spectra lrl
please help me
with respect jack

You can try with a 9V battery and a 100k resistor in series with one rod. It is very strange, but with this you will have an increase at sensitivity.

[Geo]

Originally Posted by WM6

As I understand, you are asking for this circuit? (in this case hands have to be well isolated from brass rods):

With this schematic you try to take the signal from lrods and to turn on the PLL. I tried it before years without results.

[WM6]

Originally Posted by jack

njegov krog, kako pomagati medeninaste palice za metal?
Sprejem palica je iz medenine z več vezij?

Dear jack,

your Slovenian is great, but questions in whole has no sense, so I cannot give you an answer.

What is your native language, cay you put here your question in your native language?
Maybe this will help. Or even better: draw your idea and we will comment.

Originally Posted by Geo

With this schematic you try to take the signal from lrods and to turn on the PLL. I tried it before years without results.

Agree Geo, but, as you can see, jack insist on those construction so we can try to help him. It is better for him to build this than buy something shamelessly overpriced from Mineoro or others similar scam companies.

[WM6]

Here complete schematic with PCB (PCB 3.5x3.5", Corrections: for D1 use 1N4148 and for C1 22pF) :

[WM6]

List of material:

[Geo]

Originally Posted by WM6

Dear jack,

your Slovenian is great, but questions in whole has no sense, so I cannot give you an answer.

What is your native language, cay you put here your question in your native language?
Maybe this will help. Or even better: draw your idea and we will comment.



Agree Geo, but, as you can see, jack insist on those construction so we can try to help him. It is better for him to build this than buy something shamelessly overpriced from Mineoro or others similar scam companies.

From what i saw at photo attached from Jack, he need something to make the lrods more sensitive, or to make him more sensitive. You can draw with your 3D program a battery 9v with a resistor in series with one Lrod. The other Lrod is connected with the other pole of battery. There are people who says that they have high increase at their sensitivity when they work with Lrods.

[Tim Williams]

Originally Posted by Morgan

I allways thougt no need a second circuit to oprerate the Rods in Karl´s MFD...

Morgan I noticed you have Au and Ag backwards.

Au 5K
Ag 8.7K

So they say....

[Morgan]

Originally Posted by Tim Williams

Morgan I noticed you have Au and Ag backwards.

Au 5K
Ag 8.7K

So they say....

yes,this was one of my first LRL projects,maybe 6 years ago,i made it according Karl instructions in Geotech forum.But dowsing is not my favorite hobby...anyway i saw people with skill ability with rods.

[jack]

Originally Posted by WM6

Here complete schematic with PCB (PCB 3.5x3.5", Corrections: for D1 use 1N4148 and for C1 22pF) :

tank you very very much dear wm6
Please explain the workings of the circuit for me?
How to help brass rods?
What makes a beep?
whith respect
jack

[Sneshko]

Dear WM6!
You are very generous.
On behalf of all LRL fanatics,
Thanks for this electronic dowsin rods!
Regards!
Sneshko

[WM6]

hi jack

I think it is better for you to buy one completed device, like this from Morgan:

http://www.longrangelocators.com/for...76&postcount=7

It is cheap in build with soul, which is by dowsing devices most important, namely, that it was build with soul and positive intention, not like mineoros and other scam devices which was build mechanically and with negative fraud intentions.