Zahori

[goldfinder]

Originally Posted by g-sani

I would like to ask your opinion about the gold sample antenna and an idea that came into my head.
Has anyone used gold wires for L1 & L2 and also gold wire in 10 turns arround a ferite or even a nail?
Would it be any good in sensitivity regarding to gold detection?
Why people came up whith the idea of a gold sample when they can use soft 24cts wire to make their antennas?
Just a thought!

Your idea is good. I used it about 15 years ago when I was testing LRL electronic dowsing. It actually seemed to work much better. The energy line to a gold sample was stronger. I had a psychic friend at the time who could see the energy lines and they were more intense with the gold wire antenna. I used helical antenna theory to design the antenna. I think I still have the antenna in my junk box.
Goldfinder

[Qiaozhi]

Originally Posted by goldfinder

Your idea is good. I used it about 15 years ago when I was testing LRL electronic dowsing. It actually seemed to work much better. The energy line to a gold sample was stronger. I had a psychic friend at the time who could see the energy lines and they were more intense with the gold wire antenna. I used helical antenna theory to design the antenna. I think I still have the antenna in my junk box.
Goldfinder

You should leave it in the junk box where it belongs.

[WM6]

Originally Posted by goldfinder

...... with the gold wire antenna. . I think I still have the antenna in my junk box. ....

"gold wire antenna" in junk box?

Now, you need only good metal detector to find it.

[nelson]

Hi there.
Does anyone know replacements for BC239 and 2N3819

I m also sending to the post, my version of small zahorie PCB, made on sprint layout.
If there is any errors just let me know.

Regards

Nelson

Originally Posted by Morgan

Two mini zahori PCB´s
They can work with 9v or 18v
Ignore the part BFO,becouse its another project.

Attachment 14433

Attachment 14434

[mesy64]

hi Morgan
i built mini zahori. I'm testing the device. How should I know if this device works or not????
Please help me to build my antennas in building antennas for these devices have problems
I made the antenna look like the image below it is correct?
I'm testing device must understand how the system works or not?
Regards

[mehdi]

hi to all
wath is the better?
mini zahori or this shematic?
i built that and work very good.

[epitopios]

Or try this , I make it and it works

[epitopios]

to Morgan , one question ???
Regards , epitopios .

[g-sani]

Originally Posted by goldfinder

Your idea is good. I used it about 15 years ago when I was testing LRL electronic dowsing. It actually seemed to work much better. The energy line to a gold sample was stronger. I had a psychic friend at the time who could see the energy lines and they were more intense with the gold wire antenna. I used helical antenna theory to design the antenna. I think I still have the antenna in my junk box.
Goldfinder

Hi Goldfinder,
I will really appreciate it if by any chance is easy to show us your helical design antenna.
I practise dowsing as well and I am always thinking of different dowsing tools, electronic or not.

[Morgan]

Originally Posted by g-sani

Hi Morgan, I will help you in my way when I will have it ready.
Twenty years probably is not bad for a burried medal as a test target but weight is a factor as well.Even if this medal is 200grms I believe it is not enough in relation to the time it is burried.
You are always invited over here to test any LRL you like in real conditions.Apart from your tickets everything else will be on the house.
We will invite Geo as well! But I am sure he has done it allready(inviting you).
Well you can always come together since we are only an hour apart by car.
In any case I will make a video while testing so everybody will have an oportunity to see it working in the field.
All the best
g-sani

Hello

And you have some places where you think can be burried some treasures?
You are from U.S.A or other country ? Its interesting to make TH in countries where its possible to do without breaking laws.
Tanks for invitation.

Regards

[Morgan]

Originally Posted by epitopios

to Morgan , one question ???
Regards , epitopios .

Yes

[mesy64]

hi Morgan
i built mini zahori. I'm testing the device. How should I know if this device works or not????
Please help me to build my antennas in building antennas for these devices have problems

[g-sani]

Originally Posted by Morgan

Hello

And you have some places where you think can be burried some treasures?
You are from U.S.A or other country ? Its interesting to make TH in countries where its possible to do without breaking laws.
Tanks for invitation.

Regards

Hi Morgan, check this post of mine bellow the post number. It says: Location:Greece.
To do TH over here you need to aply for a special licence and ussually as long as it is not a known archeological place you get the permision for excavation.
Many Regards
g-sani

[mehdi]

hi morgan
please clearly description the antenna specially L2; conect to ground or R9?!!
please reply
thanks
mehdi

[epitopios]

to mehdi :
if it will help you , see what i have done last night

ZAHORI ANTENNA
Before :
http://i.imgur.com/syozx.jpg
and after :
http://i.imgur.com/TlGEf.jpg
and with a simple pcb
http://i.imgur.com/941Fi.jpg

regards , epitopios

[mehdi]

Hi epitopios
thanks for reply
i send to you a private message at title (zahori). please read that.
regards
mehdi

[epitopios]

2 fotos from zahori

[Zocky-Zocky]

For "nelson"!
Replacement for BC239 is: BC184 and BC549.
Replacement for 2N3819 is: 2N3823; BF244 and BF245.
Regards!
Zocky-Zocky

[nelson]

Hi Zocky and thanks a lot for your help.
I already building zahori, but 2N3819 is not easy to find here in my country, so yesterday i ordered a few.
By the way, did you try this circuit?
If so, what about results.
Regards
Nelson

Originally Posted by Zocky-Zocky

For "nelson"!
Replacement for BC239 is: BC184 and BC549.
Replacement for 2N3819 is: 2N3823; BF244 and BF245.
Regards!
Zocky-Zocky

[Zocky-Zocky]

Originally Posted by nelson

Hi Zocky and thanks a lot for your help.
I already building zahori, but 2N3819 is not easy to find here in my country, so yesterday i ordered a few.
By the way, did you try this circuit?
If so, what about results.
Regards
Nelson

Hi nelson!
Yesterday I got to circuit. These days I'll try it out and the results published in this topic.
Regards!
Zocky-Zocky

[nelson]

Hi Morgan.
I will like to know, if is posible to use an 18 or 24 K gold ring instead of a small gold bar, has a sample?
Also if you replace gold sample by silver, whats going to happens?
Regards
Nelson

Originally Posted by Morgan

The mini zahory antenna with sample,gold or silver

[nelson]

Hi epitopios
I will like to know what sounds does mini zahori made. I just finish the circuit and made just smal test without the antena, just smal wires, and the divice sound like detecting static electricity, but not a tone. I m using a buzzer
I know i must made the antenna, so tomorrow after work if i have the time, i will star building the antenna.
About gold sample, do you know if i can use a gold ring, instead of a small bar of gold?
My email is ce3llp@mi.cl , so if you whant to exchange expiriencies, will be glad to my
In advance many thanks
Regards
Nelson

Originally Posted by epitopios

it can be made , its a matter of partners, and I think the best solution = 22 carats
http://i.imgur.com/XWKKi.jpg

and also about your post 278
http://i.imgur.com/Ywh8D.jpg its already , ready !!!

and of course , special wooden box : http://i.imgur.com/RfkFp.jpg
Regards , epitopios 73s

[nelson]

Hi my firnd.
Do you tested your zahori?
Mine need only the antenna and the wood box
Regards
Nelson

Originally Posted by Zocky-Zocky

Hi nelson!
Yesterday I got to circuit. These days I'll try it out and the results published in this topic.
Regards!
Zocky-Zocky

[Morgan]

Originally Posted by nelson

Hi Morgan.
I will like to know, if is posible to use an 18 or 24 K gold ring instead of a small gold bar, has a sample?
Also if you replace gold sample by silver, whats going to happens?
Regards
Nelson

You can replace the gold bar for the ring,i think the important is the coil 10 or 12 turns around the gold for resonate.
If you use silver instead of gold,i supose the zahori become more sensitive to silver,but i´m sure it will find the gold also.
When have mor time i go to make more tests with my zahori,i remember ´to use one buzzer for production of sound like MINEORO.

[nelson]

Hi Morgan
Ok, tomorrow i will try to build the antena. Has i understood, L1 is 8 cms in diameter and L2 is 12 cms in diameter, both can use 1 to 2 mm insulated wire, and both uses just one turn correct?
Also, on L2 goes to R9 and the other end of L2 is not connected, correct?
L1 conects to 2N3819 and the other leng finish on 10 turns over gold bar and then no conection.
What is the distance btw. L1 and L2?
Whats the correct position of 2N3819, where goes S, G and D. Can you show me that on the schematics??
Sorry for made to many questions Morgan, but i m just an experimenter with little knolegment of electronics.
I had try the circuit with just small wires for L1 and L2, but no sound like mineoro comes from my buzzer, is this normal and after the antenna is made, sound changes or you just keep lestening to currents?
Finally, potentiometers, how i must set up this, are they all goes in to the front panel or just a few of them?
In advance many thanks and i promeses full report of my field test with zahori.
Regards
Nelson

Originally Posted by Morgan

You can replace the gold bar for the ring,i think the important is the coil 10 or 12 turns around the gold for resonate.
If you use silver instead of gold,i supose the zahori become more sensitive to silver,but i´m sure it will find the gold also.
When have mor time i go to make more tests with my zahori,i remember ´to use one buzzer for production of sound like MINEORO.