|
|
|
|
#1
09-03-2012, 05:44 PM
|
||||
|
||||
Who needs a LRL all you need is a Gold Filter & Cell Phone!!!
LONG RANGE GOLD DETECTION FILTER
NEW ITEM custom coated, we are the only seller of this product. Special coated filter to detect the aura of gold. This filter will block all normal light frequencies except the gold one because of the special gold aura frequency coating. Simply use the camera of your cell phone. Hold the filter close to your camera and see if there is any burried gold. Items that contain gold will light up, the longer the golden item is in the soil the stronger the aura will be. Our tests shows the aura is starting to get visible after 2 months. You are right on time to find all those lost rings and necklaces this summer at the beach, AND the past summers! Finding golden items never was so easy thanks to this special filter. A simple metal detector will come handy to finish the job. Note: this filter will NOT be sent to Norway/Italy and the Netherlands. See hear: http://www.ebay.co.uk/itm/ws/eBayISAPI.dll?ViewItem&item=150892882585&ssPageNam e=ADME:B:SS:GB:1123 
|
|
#2
09-03-2012, 08:21 PM
|
||||
|
||||
|
Quote:
Do you use any software (as Photoshop or Photo Studio. etc.) into your Cell phone for sharp image. Regards
|
|
#3
09-04-2012, 06:09 PM
|
||||
|
||||
|
Quote:
I don’t have this “Aura Filter” but thought it would be an interesting topic. If you look at the eBay sales page you can see the “Test Field” pictures that show 5 gold targets buried in the ground at depths form 20cm to 70cm. And they have been buried from 2 months to 5 months “not very long really” I may try contacting the seller to see if he has any video of finding gold “but not in his test field” Regards
|
|
#4
09-04-2012, 09:20 PM
|
||||
|
||||
|
I contacted the seller of the “Gold Filter” below is my question to him also the reply I received –
My question – Hi, Impressive photos of the” test field” with the gold filter, I wondered if you have any pictures or better still a video of recovery of finds made with it? His answer - We are still in the "testing mode" , the items are still buried in the test field, these are just the results so far, we expect the auras to grow bigger and off course we want to know before we dig them up again, so...sorry. No video yet. I think we will be testing another 6 months.
|
|
#7
09-04-2012, 10:34 PM
|
||||
|
||||
|
Quote:
I don’t think he would be giving away his secrets. Ercan, So you think this is an “Infra-Red Filter” if so then it’s easy enough to buy a cheep one just to test it with my camera phone. I can use my gold ring buried for ten years in my garden to test it out. I don’t think you need to use any software; you just scan an area with your camera phone and hold the filter up to the screen "thats it" Regards
|
|
#8
09-05-2012, 08:09 AM
|
||||
|
||||
|
Quote:
Maybe better to buy a quality brand name IR camera filter here for £29.99: http://www.ebay.co.uk/itm/Hoya-58mm-...ht_2566wt_1065 Or if you want a cheap one like he sends you, try this one for £1.34: http://www.ebay.co.uk/itm/37mm-850nm...ht_3946wt_1164 It can make some interesting photos, but don't expect it to find gold.  Best Wishes, J_P
|
|
#9
03-14-2013, 06:09 PM
|
|||
|
|||
|
Quote:
I am Ashwin and interest in this topic (gold detection by cellphone and a filter). As you know there are many brands and models of cellphone in the markets. Which model is better for aura detection? All the best. Ashwin
|
|
#11
11-09-2013, 09:36 PM
|
||||
|
||||
|
You don´t have to buy such expensive filter.
My equipment is a canon 350D, a 720nm IR filter (Chinese filter for around $14), fitted to a 300 mm sigma lent and a tripod. Today i m mounted my camera on the tripod and took a few pictures just on my garden were i know there are some metals spred under my grass after my home was build. All in all after i took the pictures with diferent settings on my camera i process the pictures with arcsoft photostudio software and i got the results i m posting here. Then i check this with my metal detector and gave me what i think is a match of what my camera was showing, because i got a signal on the spots that are blue on the picture and also if you look close to the upper left side of the picture, you will see something like an aura that is not 100% on the center of the picture. However, and appart of the metals that i know are underground on my yard, there are also two copper water pipes. The best settings of my camera were, ISO 400, speed 125, and 4.6 apperture of my lent. Soon i will get more pictures and post it here. I hope anyone else can do some IR experiments and post it here Best regards Nelson Quote:
|
|
#12
11-11-2013, 10:49 PM
|
||||
|
||||
|
Hi Nelson,
Impressive results you have of your buried metals in your garden, can you tell us what the metals are? I have been meaning to reply to this thread about my results 5 months ago when I used a IR filter over my camera android phone, but the results where negative even when I used a photo shop to enhance the photos nothing showed up on my test bed in my garden. I will have to try the IR filter on my digital camera on the setting's you recommend? Buy the way I see they are now charging over £2K for the IR filter on EBay Regards MIJ
|
|
#13
11-27-2013, 12:01 AM
|
||||
|
||||
|
Hi MIJ and sorry for my delay
Ok, let see. I m using a Canon EOS 350D, a 720 nm filter and a tripod For the picture you are seeing my camera setup did not match for correct IR imaging. After that i discover that my new settings must be focus at 4.0, speed 1/40, ASA 200 not 400, light tungesten. All this must be done with the sun on your back. The best time has show to be around 10 to 18 hrs. The idea is to get the relected IR on metals. Later i will post a picture that i got from my test garden that has 10 silver coins buried on March 2013. Metals does not need to be has long has LRL needs to get a signal. I heard from people that can get an aura after 24 or 48 hours after the metal was buried. You can also try any digital camera that can see a remote control thru his lens. If this work, then buils a small filter with just a pice of exposed 35 mm film. One shet gives you abot 720 nm, two 850 nm and three around 950 mm or may be 1000 nm. Test has show that 720 nm are the best to get an aura. After you get the picture, this will look very dark, so you must enhence your picture with photoshop or canon arcgeo software. I hope you get the idea and if you give a try, just let me know your results. Regards Nelson Quote:
|
 |
|
|
Hybrid Mode
