|
#1
|
||||
|
||||
L Rod fault
Hello.
As you know, i believe and i work with L rods, with and without generator. Before 6 months i went at the old house of a friend to looking for a treasure of coins. His grandfather buried it near the house (noone knows exactly). near the house there are a lot of iron objects. I looked for the place with L-rods at first and later with generator and rods but without results. So he called another men with rods and he located the exactly point where was the treasure. The point was inside the house Yesterday he call me again . I went with the Delta Pulse and with a Bandido clone. I checked the place but no results from the detectors. I found only a big nail. Look the photo.... Regards
__________________
Geo |
#2
|
||||
|
||||
Hi Geo
Lords and metal detector without result Therefore , At the first, may be nothing at that location. And second ,may be buried in high deep. Best regards. |
#3
|
|||
|
|||
It's better call operator fault not L-rod, please don't outrage L-rods.
Geo !! as we know you have built a good acoustic type LRL like PD, why didn't use it? of course now I use L-rods without F-generator only for depth determination. after locating and pinpointing a treasure with my fabulous PI (MDL) I check there based on thumbs rule to find approx depth. ( I stand exact up the point, set them parallel and start to walk until rods cross or diverge), one of our treasures is at about 14-16 meters depth, another one 9-11m. our another PI which is somehow more powerful than pulse star, over these points is entirely silent, mute. so maybe Aft is right, treasure is at great depth, but behavior of your MD for a real treasure is different than trashes. you should be familiar to this behavior and in such areas at first scavenger there from any kind and piece of junk with small coils, afterward search with bigger and bigger coils to see what can bit; I'm sure you knew what I'm telling . oh forgot to say MDL is entirely useless in such areas where are full of junk metals cos it beeps nonstop at overload level and the worse for metal building foundations or columns. |
#4
|
||||
|
||||
Quote:
Hi Michael It is big amount for dip . :shoc ked: did you dig 11 meters ? Can you Founded metallic object at that hole ? Best regards. |
#5
|
|||
|
|||
Hi Aft,
Yes We dug there up to 8 m without any metal or trash or junk, there is one remote wilderness area and soil is entirely neutral for MD. but the main obstacle was jinn interferences. |
#6
|
||||
|
||||
|
#7
|
||||
|
||||
Gin Interference?
And just how did the jinn interfere with your dig? Cave-ins, hard soil or rocks. Something like that or actual physical interference with the workers?
__________________
Wes Pearson "Why Yes! I am a Real Helicopter Pilot" |
#8
|
||||
|
||||
Quote:
Hi Michael. For me there is not treasure at this point. The man that located this point, can dig and take the treasure. The flooring is manufacturing with cement and iron, so it is not easy to looking for with a big coil (1x1 or 2x2). If a treasure is 2000 years old, then maybe to be at big depth. But if it is 70 years old, why the men to put it at so big depth????? Before 70 years there was not machines, so they digged with hands. One meter is ok because they wanted, one time, to take the treasure again Regards
__________________
Geo |
#9
|
||||
|
||||
Quote:
Hi Michael. How do you know that i have a good LRL??? please sent me a message or write here Regards
__________________
Geo |
#10
|
||||
|
||||
Quote:
As i said to Michael, for me there is not treasure Regards
__________________
Geo |
|
|