Schematics for Dowsing Rod

[humhum]

Schematics for Dowsing rod: http://ul.to/iibwbapf

[goldfinder]

hey hummer - that circuit looks really extensive and so many parts. I built one for some friends with about 6 components. used a PIC micro-controller to generate the frequencies. And 1/2 the parts were to provide a stable 5 volts for the PIC.

The nice part about using a PIC uC is the frequencies don't drift all over as the PIC is very stable with respect to frequency. And you can get the dowsing rods on eBay for about $20 if it floats your boat to play w/ "electronic dowsing".

Goldfinder

[Geo]

Originally Posted by humhum

Schematics for Dowsing rod: http://ul.to/iibwbapf

Hi.
Do you have details of Tp1???

[Geo]

Who can translate the follow????

Thanks

[Fred]

Originally Posted by Geo

Who can translate the follow????

Thanks

I understand absolutely nothing of this language, but i would say
- Ferrite core 1cm2
- Between 1 and 2 : 18 turns 0.41mm wire
etc...

[WM6]

Originally Posted by Fred

I understand absolutely nothing of this language, but i would say
- Ferrite core 1cm2
- Between 1 and 2 : 18 turns 0.41mm wire
etc...

It is Bulgarian.

I am not sure that it is about ferrite. "ламарина" mean "sheet iron, tin" (silicon tin) so it is more about section of transformer tin sheet.

Yes, other text is saying about Nr. of turns and wire diameter.

Al turns wound in the same direction.

[humhum]

сечение -kesit -section = 1cm2
силиций -silikon - silicon , ламарина- teneke, kalay- Tin= 0.35
1 to 2 = 18 turn from 0.41mm2 wire
2 to 3 = 32 turn from 0.23mm2 wire
3 to 4 = 60 turn from 0.23mm2 wire
All tours in the same direction