BIOnic 01 Schematic

[WM6]

Dr. Best New Year free Gift to all:

[Geo]

Special gift
Thanks

[WM6]

After PM asked for better resolution schematic dr. Best give us some modified version:



Eye contact lenses have to be +3.00 to 4.25 to correct prismatic effect.

[Geo]

I don't need better resolution. I worked with Bionic Alfa and i have personal experiment.
It don't work, so i believe the same and for bionic 1.

Regards

[WM6]

Originally Posted by Geo

I don't need better resolution. I worked with Bionic Alfa and i have personal experiment.
It don't work, so i believe the same and for bionic 1.

Regards

You damm skeptic!

[Geo]

Originally Posted by WM6

You damm skeptic!

Sorry, i don't understand the world "damm".
What are you mean??

[WM6]

Originally Posted by Geo

Sorry, i don't understand the world "damm".
What are you mean??

Have to be damn not damm.

Mean something nice (since invalid) like:

1. δεκάρα
2. πεντάρα
3. ανάθεμα

1. καταδικάζω
2. καταρώμαι
3. διαβολοστέλνω
4. επικρίνω δριμύτατα

[nelson]

Hi does anyone know were i can get the BP-109 phototransistor or any replacemente.
Here in my town i can get BPX 38-2/3, but i don`t know if will work for this project and also if is a god one.
Regards
Nelson

Originally Posted by WM6

After PM asked for better resolution schematic dr. Best give us some modified version:



Eye contact lenses have to be +3.00 to 4.25 to correct prismatic effect.

[WM6]

Originally Posted by nelson

Hi does anyone know were i can get the BP-109 phototransistor or any replacemente.
Here in my town i can get BPX 38-2/3, but i don`t know if will work for this project and also if is a god one.
Regards
Nelson

Hi Nelson

BPX38 can be adequate replacement for BP109. You can try to replace BP109 by any NPN photo-transistor for general use which cover red light spectrum of about 666nm wavelength.
By BPX38 you can use even green (about 525nm) laser pointer too, which is way better than red laser pointer.

For better sensitivity to 24 carat gold and orgone effect it is suggested to take in consideration The Golden Ratio
(The golden ratio or divine ratio is about 1.618033988749894848204586834365638117720309180... ).
In this case distance between laser pointer body and tube have to be 1.6cm tube diameter not more than 1.6cm and tube length (1.6 x 3.14) cm.

[nelson]

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson

Originally Posted by WM6

Hi Nelson

BPX38 can be adequate replacement for BP109. You can try to replace BP109 by any NPN photo-transistor for general use which cover red light spectrum of about 666nm wavelength.
By BPX38 you can use even green (about 525nm) laser pointer too, which is way better than red laser pointer.

For better sensitivity to 24 carat gold and orgone effect it is suggested to take in consideration The Golden Ratio
(The golden ratio or divine ratio is about 1.618033988749894848204586834365638117720309180... ).
In this case distance between laser pointer body and tube have to be 1.6cm tube diameter not more than 1.6cm and tube length (1.6 x 3.14) cm.

[Leto]

Originally Posted by nelson

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson

Nelson, Nelson....
how can I say this... this project will work only on northern hemisphere (this is where WM6 resides)..
For your part of the world you need complementary transistors, reverse power supply, etc. As I understand Dr. Best does not want his work to be copied by known south-america quasi LRL factories..
Also I tried soaking the lenses in antifreeze but the results are not so good.. Better using Freds hydrogen-oxygen combination.. or maybe nitrogen peroxide with RP-1 (refined Petroleum). I would give everything for good liter of C-stoff now.
So Nelson you can try it, but I predict you'll get only randomized flashes from the device in your part of the world.. sorry

[WM6]

Originally Posted by nelson

Hi WM6.
By now i m collecting components to build one unit.
For that i have a few questions that cames to my mind:
1.- A normal laser pointer working btw 630 to 680 nm, could work for this proyect?

2.- The contact lenses, must be the same optic measure or can also work with deferent optic measure?

3.-Finally i will like to ask if you know if any person has made this proyect and how this work?

In advance many thanks for your support.

Regards

Nelson

Hi Nelson

1. You can use any normal red laser pointer (better one with stronger laser beam). Even better green laser pointer. All are covered by your photo transistor.

2. Spider question. I think you can use lenses with different optic measure, bacause of separate tunnig both sensor.

3. There was some interest at PM here, but I dont know in which phase are their projects now.

Wish you DIY succes and have a great time with your GOLDY.

[oz neil]

Desparate to find field service information for OKM Future 2005. Can Anyone suggest a source?

[gps]

Originally Posted by WM6

Dr. Best New Year free Gift to all:

Dear WM6,

How can I make a bionic 01? I need this detector but it's very expensive!
Best regards.

[WM6]

Originally Posted by gps

Dear WM6,

How can I make a bionic 01? I need this detector but it's very expensive!
Best regards.

Read this topic from start. There are schematic, very simple and cheap, and a lot of explanation regarding building this device. If you are born dowser your success is guaranteed.

[gps]

Originally Posted by WM6

Read this topic from start. There are schematic, very simple and cheap, and a lot of explanation regarding building this device. If you are born dowser your success is guaranteed.

Dear WM6,

Thank you very much for your fast reply. I'd like to ask you some details about this schematic. If you help me to make a bionic 01, I'll pay you. In fact I need all details to make a bionic 01. Please contact me through my email: nmr13c(at)gmail.com. I will be very happy if you answer my questions.


What are 741, BP109, P1-3?
How can I adjust this detector?
Is vacuum in the tubes?
what is under the contact lenses?
Can I detect hidden gold below the earth?

Best wishes,
gps

[WM6]

Originally Posted by gps

What are 741, BP109, P1-3?

741 - probably most known linear amplifier in the world, BP109 - phototransistor- can be replaced, ask your electronic parts dealer, P1-3 = pots (is this your first schematic?)

How can I adjust this detector?

Described in topic.

Is vacuum in the tubes?

If you need ionisation chamber then you use clean kerosene (petrol) or much better isooctane (C8H1) , cause vacuum cannot be ionised.

what is under the contact lenses?

read previous answer

Can I detect hidden gold below the earth?

Only if you are born dowser, otherwise, better to use metal detector.

!_!

[gps]

Originally Posted by WM6

!_!

Dear WM6,

thank you very much. Yes it is my first schematic.

best regards

[expert]

hallo every body i work from three days on this schamtic for bionic
it give me agood result but in sun shine in the night it doesnt work why what is the reason
is their asolution

thanks alot

[WM6]

Probably laser is to weak or sensor tube receive in wrong direction regarding reflected beam try and tune directivity first from vicinity 1 to 2 m.

[Morgan]

Originally Posted by expert

hallo every body i work from three days on this schamtic for bionic
it give me agood result but in sun shine in the night it doesnt work why what is the reason
is their asolution

thanks alot

Hello


In other thread you said cant put the BIONIC to work becouse something is wrong with schematic.
What corrections did you find in schematic?
What you found with this BIONIC,and distance?


Regards

[expert]

ok i do the schematic exactly
but i use resistor 200 ohm on the rgb led and i use lenses (glass one) with 3.75 correction
on gold rgb led well be off in sun shine only(you must Caliber very well)
thats all

[expert]

thank you wm6 i well try to but another laser pointer is the green one stable to work thanks

[WM6]

Originally Posted by expert

thank you wm6 i well try to but another laser pointer is the green one stable to work thanks

Green laser is one the best (of course it depend on how much mW we get out of it). There can be problem with directivity of sensor tube. Sensor have to be positioned in direction of reflected laser beam. Another problem is, if laser light wavelengt (color of laser light) does not correspond to fototransistor dedicated wavelenght (color light). Those two dedicated wavelenght have to correspond to each other.