metal frequency (my test)

[iam_7up_gamer]

Hello to all lrl loves,
Yesterday i test and selected nice and real frequency of metal . This frequency work with passive system.

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)

If your have other frequency put here

[FrancoItaly]

Hi iam_7up_gamer,

The passive receiver works with ferrite coil?

There is a trasmitter coil?


Regards

[iam_7up_gamer]

No diffrent , ferrit, coil , radio fm , loop antenn and ....
I test this frequency with conic coil and variable cap in field and real buried item

[FrancoItaly]

Well, if you do not want to say more, we take note that you have made a LRL with discrimination and on my part I will not ask more.

[iam_7up_gamer]

I answer any question my friend

[iam_7up_gamer]

Franco you problem is ballance betwen tr and rx , yes ?

[FrancoItaly]

Okay, but it does not change, we know that your LRL is sensitive and discriminates gold, also we have a vague idea of the operation at this point I think there is nothing more to add.

[Bill512]

Originally Posted by iam_7up_gamer

Hello to all lrl loves,
Yesterday i test and selected nice and real frequency of metal . This frequency work with passive system.

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)

If your have other frequency put here

Hi,
this frequency table is for use on pure electronic locators , or is intended for L- rods type?

[iam_7up_gamer]

Hi. No my friend high frequency like 59 khz have very harmonic which not good for lrod , for l rod you must use low frequency like 5 khz , because low frequency is exact and high frequeny is strong

[Nicolas]

Originally Posted by Bill512

Hi,
this frequency table is for use on pure electronic locators , or is intended for L- rods type?

This is tested by me at my lRl's dear friend

I have 6 frequency selectetd by a selector.

Bronze for me is not 62.000 but 56.300
look at my viedo you can understand good

[iam_7up_gamer]

yes bronze not detect with 62 khz . in my lrl 55 khz is so good . with 55 khz detect from 20 meter and with 595 khz detect from 150 meter

[goldfinder]

[QUOTE=iam_7up_gamer;151446]Hello to all lrl loves,

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)


I have studied this frequency thing of metals for some time. These frequencies fit with
theory and are harmonics or close to yours.
Here are other frequencies, plus or minus some variable factor, that come out of my research. You will note for example that your silver frequency is a subharmonic of mine.
Gold 50 khz
Silver 85 khz
Lead 4.25 khz

Many dowsers use numbers that are like those of mine above. When they do this it is pure mental dowsing. For example they come up with 5 KHZ. If there was a frequency like crap for gold, put crap in the machine and the dowser would find it.

Many of frequencies come from poorly tuned machines that the frequencies are way off because their measurement machines and signal generators are lousy.
GF