Application Note

[ma330]

hi to all freinds
Can someone explain to me how this circuit works?
How it helps to find gold and silver?By what process?

[aft_72005]

It is article by Carl , refer what's he said in main pages .
I think it was enough!!!!.

[Dedevil]

The detection is made with c1 and c2. It detects the what was known as ground balance in the old detectors. There is a simpler circuit on the web which just uses the op amp but this is still a good circuit and the cmos chip may give the circuit a good input impedance.

rgds

[ma330]

tank you aft-72005 and dedevil
Who knows the device based on this model?
Systems companies vector track For example pdf1000
A probe is connected to ground and a telescopic antenna in the air.
How do these systems is based?

[Sneshko]

Originally Posted by ma330

How do these systems is based?

The deception ma330!!!
If you did not regret the money, or if you have one too, then just buy this device!
With it you will discover one big NOTHING!
Except if you were not born dowser (as he likes to say our WM6).
Regards!
Sneshko

[ma330]

Originally Posted by Sneshko

The deception ma330!!!
If you did not regret the money, or if you have one too, then just buy this device!
With it you will discover one big NOTHING!
Except if you were not born dowser (as he likes to say our WM6).
Regards!
Sneshko

no Sneshko.I do not want to buy this device.
I just know based on what works.
Who knows?

[J_Player]

Originally Posted by ma330

hi to all freinds
Can someone explain to me how this circuit works?
How it helps to find gold and silver?By what process?

This circuit does not help you to find gold and silver.
It makes a small signal electricity that does nothing for a treasure.
The signal cannot be measured more than 5 cm distance away from the brass rods that you push into the ground.

The brass ground probe rods can be good to help locate buried metal if you put a rod in the ground to hit against the buried metal.
When you feel the rod push against the metal, you will know you have located treasure under the rod.
Or maybe if you are not lucky, you located a rock.

See below the principle of operation for MFD:

Best wishes, J_P

[Fred]

Originally Posted by J_Player

This circuit does not help you to find gold and silver.
It makes a small signal electricity that does nothing for a treasure.
The signal cannot be measured more than 5 cm distance away from the brass rods that you push into the ground.

The brass ground probe rods can be good to help locate buried metal if you put a rod in the ground to hit against the buried metal.
When you feel the rod push against the metal, you will know you have located treasure under the rod.
Or maybe if you are not lucky, you located a rock.

See below the principle of operation for MFD:

Best wishes, J_P

This is a great post JP, most people will understand it and is very true,
Maybe there is still too much text in it but the progress is obvious.

[J_Player]

Originally Posted by Fred

This is a great post JP, most people will understand it and is very true,
Maybe there is still too much text in it but the progress is obvious.

Too much text?
Ok, here it is again with less text:

Best Wishes, J_P

[ma330]

Who knows what parts specified in the file and what does it do?I need information about The specified.
Who is the schematic of this?

[Fred]

Originally Posted by ma330

Who knows what parts specified in the file and what does it do?I need information about The specified.
Who is the schematic of this?

It does nothing except more money for the seller.

[WM6]

This is gold calling button. Work on gold frequency like a pager.