Quote:
Originally Posted by Morgan
yes, the PDK is hard to dominate becouse of the high level of capacitance, however once you find the right place for the coil you get it mastered.
Since some people decide to expose the circuit of the PDK-2.1 model, the unique secret that remains is HOW TO TUNE THE COIL, for this process you need to build the PDK exactly like the model I build,becouse this is the best arangement for mastering the electronic components that irradiate capacitance, I have tried diferent shapes that was impossible to control.
Once you get this correct shape , need to have a buried test to try the PDK, the tuning of the coil start with a 6N8 cap and you need to move slightly the coil up or down until you can pick the signal of the buried object, if there is no results you need to try other cap value until the receptor coil can catch the PHENOMENON, as you can see its hard to do...and unforyunatly you balance and tune the PDK for your area, if you go to search to other country with the PDK maybe not work, its like IMAGINE YOU GO WITH A METAL DETECTOR USING A FIXED GROUND BALANCE to a remote area where the ground conditions are completly diferent, the results are poor,YOU NEED TO TUNE AGAIN THE PDK.
As to the most asker question,WHAT IS THE STIMULATOR IN THE PDK-2.1, the right answer is the arangement of the electronic elements at the correct disposition that play as stimulator,and by ajusting the RX coil more far or more near the circuit this act as a stimulator for the coil,or FERRIT also can be used.
|
Hello Morgan
From analysis of you words, if they are truth /i think you are talking a truth but not the whole truth/ i can do undestand that your pdk is capacitive long range locator.
. About ''mastering the electronic components that irradiate capacitance,... '' and ''diferent shapes impossibile to control /capacitance/'' it is perfecly clear that you dont speak about active componets, like transistors or diodes or buzzer. it further mean that you dont speak about capacitors because you have made it and tried different shaps /you cant change the shape of factory capacitors/. only one stuff remain playing your game. inductance or inductor. but it is not ordinary inductor because that strange inductive componet irradiate capacitance. and that capacitance is not at all small value /part of pico farad/. so what is it......
from my electronic skills i know you are talking about coil-capacitor/s. it is only one componet which have twins attributes.
question is only one for me. how did you have coupled that strange coil-capacitor with main parallel LC tank coil. inductive or capacitive coupling or both in some proportions to maintain small oscillation due to target gold signal trigger.
if all i said is correct than your pdk live /work/ on the eadge of super sensitive magnetic receiver and super small output capacitive oscillator. jumping over the eadge and go back when he jumped.
maybe if you are good will, you would give some priceless valuable informations.
ps. i have a strong intuition that pdk operator is a part of passive receiver circuit. /
/ point of sensitivity is reached when a beep /oscillations/ is heard by touching the knob /capacitive coupling via operator finger/ and turning the sensitivity to its triangle mark /triangle mode LRLR /*INDUCTOR-CAPACITOR-OPERATOR**including self capacitance of pdk operator/.
Best regards
Dragan
The Highlander /i live in mountain/
South Serbia
East Balkan /not west like eu politician lain.
Inner planet Gea /
/
ps. Morgan tell us about real test distance you have pass through a golden sieve of your pdk and how big were treasures /gold coins overjump for public release /
/.