Quote:
Originally Posted by FrancoItaly
Very interesting, something I had read in the past, unfortunately at the moment I can do little. An important improvement for my lrl would be to eliminate the compass effect in order to increase the gain.
|
FrancoItaly I need you help tuning hef4046 LRL-PLL to detect gold. Step by step instructions and improvements for your LRL-PLL to eliminate the compass effect with maximum possible gain without signal distorsion.
I am running currently a lot of experiments, your hef4046 LRL-PLL with special tuning detect my force-field or my aura. Around a healthy and powerful man like me there is 40 cm force-field from my bio-life-force. I am currently not interesting in bio-enginiiering and DNA modifications. Al my interests are about THE GOLD. My display sensor stage 3x LM3915 with 3 bar graphs, meassure tiny signals with 10mV steps with resistive prescaling input signal in some proportion. I was changed both variables, input coil L inductance and variable capacitance C at input of PLL-LRL. Also lenght of stylus-whip antenna is variale inmy case.
Also i was implemented GEO modification, by precise trimming amount of mixing pll oscillator signal from pins 4,6 to the input of 3,3nf capacitor via 20 turns vishay variable resistor 10K. The main trick is in a exactly correct proportion between two signals - from oscillator and what came through the stylus-whip antenna, because the device pick up many non electrical signals with unknown origins.
I need to know correct dc offset after 3rd order LP-filter to adjust 3 x LM3914 to cover entire signal range with minimum meassuring steps.
Would you like to help me TO ADJUST IT ONLY FOR GOLD ?
If youl like post your Infra-red LRL and i will try it in a practice on roman's earthed towns and fortresses.
best wishes
Dubulumach