Quote:
Originally Posted by ANDREAS
Thank you Qiaozhi
I think you understand me . As you know my English is very poor and I don't like use of translation, as you know my opinion about dowsing.
...continue
As we know, the usual method of electronic dowsing survey, done by using a frequency generator, digital or simply that the dowsing connects the earth with copper or stainless steel needles.
Usually when placed close to the pins together on Earth, utilizing a buffer - transformer between the generator and needles.
All dowsers believes is indeed important (in terms of dowsing) in output accuracy and stability of the generator, because dowsing "believes" that it just depends on the stability of the effectiveness of investigations.
I will not mention if the force is investigating the dowsing method, as I don't comment on specific frequencies dowsers believe that it is necessary to research a specific target (eg gold).
I refer only to the wrong opinion, all dowsers, who believe that the mark of a generator can be spread on the land with spikes and even a sizable distance.
In fact if you put a generator with spikes on earth the true length of the signal propagation depends mainly
1. Since the distance between the two needles of the generator
2. From the "texture" and moisture of the land surrounding the needles
Detailed presentation and use of formulas to understand the above two parameters are not necessary here. Just I telling you that the maximum distance signal propagation in the earth needles is usually... (distance pins) * 2.9 * (special soil conditions) * (Power output RMS)
The specific conditions of soil has values of 0.7 (soil without water) - 2.4 (soil with plenty of water) on average.
So if we have two connector neeedles on earth with 1m spacing and dry ground, 1WRMS amplifier, the signal can not be spread more than 1 * 2.9 * 0.7 * 1 = 2.03 meters. He even along the spreading is to exclude any axis linking the two needles to another location and have another reduction.
Therefore any dowser who believes that the generator helps to stimulate the target at long distances is a misunderstanding. In practice Excite «ideomotor phenomenon" nothing more.
But if you really still believe that the signal travels from the needles through the earth, make a simple experiment. Whoever has digital generator to output 560-1200KIZ and connect the pins to ground. With a simple AM radio can detect the signal generator in X distance. If you cover with a metal box together needles & generator, we see that the signal is lost. In fact, the radio signal received directly from the generator and not through the earth. This is the reason that shielded a canister missed the mark, simply because there was no signal detected from earth aapeftheias
Conclusion.
The presentation of this system is to have a realistic method for sending signals inside the earth.
I have not opinion on the effectiveness of dowsing research. I have respect only for how they really need to connect a generator to send an X mark on a Y distance away and think this is enough help for those dealing with dowsing experiments or even investigating dowser search
continues
|
Yes, it is true that the distance between the ground probes affects the distance the signal is detectable. One MFD manufacturer says to put the ground probes about an inch apart. Another says five inches apart. It has been my experience that with wider ground probe spacing you eventually reach a point where the signal line does not "focus" at the target. Sort of like double vision.
I've mentioned about the Lockheed Martin underground communications systems for miners. That transmits voice (much more difficult than Morse code) a half-mile through the ground with such low power as to not be able to create a spark. Abandon ship!