|
My new FrancoItaly LRL
Dear friends!
The New year has started and I finished my new LRL. It is LRL whose author is a member of our FrancoItaly. The project that your device FrankoItali LRL is set in this forum: http://www.longrangelocators.com/for...&postcount=213 I'm the LRL his project in my version named as "The Phantom". It is this LRL of FrancoItaly: http://www.dodaj.rs/f/1X/nA/1rCngsq5/untitled-1.jpg http://www.dodaj.rs/f/3S/P4/1vVVNOeH/untitled-2.jpg http://www.dodaj.rs/f/3g/1B/2uYKNTkI/untitled-3.jpg |
...
|
And this is my LRL device assembled by the project that gave FrancoItaly.
I gave him the name "Phantom": http://www.dodaj.rs/f/3m/3J/2hFOsEu/01.jpg http://www.dodaj.rs/f/2U/oh/2m39DZHo/04.jpg http://www.dodaj.rs/f/B/Zv/11n1UTgX/06.jpg http://www.dodaj.rs/f/2M/KT/8nbdGWh/07.jpg |
For this LRL device is completely redesigned PCB in Eagle v.6.4.0 program.
It is now two-sided PCB. Plate size 66 mm x 57 mm - double-sided printing. Redesign of the images below: The underside of the double-sided PCB: http://www.dodaj.rs/f/3m/i6/4zsPALVE...strana-pcb.jpg The upper side of a double-sided PCB: http://www.dodaj.rs/f/32/f7/44I5nxQ9...strana-pcb.jpg The top side of the PCB assembly: http://www.dodaj.rs/f/M/F9/4Ds0wMBc/...ontaza-pcb.jpg Complete PCB assembly: http://www.dodaj.rs/f/1Y/yO/18JgWMep...nja-montaz.jpg Regards! Sneshko |
The printed double-sided PCB dimensions 66 mm x 57 mm:
Upper side: http://www.dodaj.rs/f/2p/yU/4BFM0kkL/pcb-1.jpg Underside: http://www.dodaj.rs/f/3k/lk/3jHNcpww/pcb-2.jpg Regards! Sneshko |
Filled sided PCB:
Upper side without built-in coil L1: http://www.dodaj.rs/f/R/l7/4qd158ks/...pcb-gornja.jpg Underside: http://www.dodaj.rs/f/2g/un/1ljCpV67...-pcb-donja.jpg Regards! Sneshko |
The interior of the LRL device "Phantom":
http://www.dodaj.rs/f/u/Rp/3gJb2N3Z/09.jpg http://www.dodaj.rs/f/3k/Il/4iGJA6CV/10.jpg http://www.dodaj.rs/f/1p/I/17LNitVk/11.jpg http://www.dodaj.rs/f/3b/Qt/1Iujo2cK/12.jpg Regards! Sneshko |
|
Dear friends!
- Do "Fantom" work? - Yes, this device works! - Is it possible to locate the "colored" metals buried in the ground? - I do not know! I still have not done the test polygon. It is now in Serbia winter and snow. In the spring I will make a test polygon so that I will bury "colored" metals in the ground and wait several months to form a "Phenomenon". Then I find out if this device can locate buried "colored" metals. Report will, of course, publish it on this forum. Until then ... Regards! Sneshko |
Dear friends!
The entire RAR project, "Phantom" in Eagle v.6.4.0 you can download for free by clicking on the link below: http://www.4shared.com/rar/RWY6ediIba/PHANTOM.html Note! Registration required! Regards! Sneshko |
Hi Sneshko,
Very very good work, I hope that on the field it's the same thing. Best regards |
Dear FrancoItaly! :)
Thank you very much! All the best!:) Sneshko |
Very nice design Sneshko - especially in post #8. Congratulations.
Wish you exaggerated findings - especially on terrains as in post #8. |
Looks very good. Just curious what this is supposed to do. Does it null when you point at the target?
|
Quote:
Quote:
Give God so to be my dear WM6! Regards! Sneshko |
Quote:
Thank you! So ... we'll see in a few months when he's ready test polygon. Regards! Sneshko |
Thank you walkman!
For 3-4 months I will know the results and publish them on the forum. Regards! Sneshko |
Dear friends!
In the midst of winter weekend in Serbia was spring time. Today, Sunday 11 January 2014 in Serbia was about 15 C. It's spring time I used to do a small Test polygon. In the muddy ground dug a hole deep 50 cm. In the hole I put the double folded sheet copper in 20 x 23 cm. size. Pictures below: http://www.dodaj.rs/f/R/vS/1KOaRfIs/1.jpg http://www.dodaj.rs/f/1s/oc/3z22iGNS/2.jpg http://www.dodaj.rs/f/10/uJ/344j2VoH/3.jpg Now we need to wait a few months to form a "Phenomenon". Today, "Phantom" is not registered anything in this place where I buried the double folded sheet copper. We'll see if the 3-4 month "Phantom" to register the Phenomenon of non-ferrous metals such as the copper. Regards! Sneshko |
can detect magnet ?
|
Quote:
Sneshko |
-hello- hola sneshko -congratulations- felicidades -for- por -these- ese -pretty- bonito ´-detector- detector,- made- hecho -whit- con -very much- mucha -tegnique- profesionalidad -good-buen -work- trabajo - excellent-excelente -design- diseño, -a embrace- un abrazo :) -- ;)
|
Thank you detectoman!
Regards! Sneshko |
Very nice pcb. Are there for sale?
|
Very nice design and professional PCB. my congratulations Sneshko. And waiting the success from you. God bless you
|
Quote:
Thank you! I'm sorry, but I have not done a PCB for sale. Regards! Sneshko |
| All times are GMT. The time now is 12:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.