from lrl to dowsing
 

:lol:i think with dowsing lrl it is better:lol:with 8,7 khz from 100 meter distance i detect turkish silver coins

https://ibb.co/fKFzRn

https://ibb.co/hNr0XS

https://ibb.co/bKmsCS

and a cave detect with 800 hz ,the video it is not good

https://www.youtube.com/watch?v=jP0BCmGCKjU

https://www.youtube.com/watch?v=HGuL...ature=youtu.be


https://www.youtube.com/watch?v=r9dSEbuC8OI

:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D

Hi taxma, do you use a cell phone with what software?
Is the software a wave generator?
How do you connect the antenna to the telephone?

It is simple connection, over so called "waste time" circuit.

I think there is a transmitter coil parallel to the earth connected with the smartphone, and the telescopic antenna is for the reception .

It is very simple but work fine,it is a dowsing rod with signal generator from the mobile,with 8700 khz i have silver coins detect,with 11700 bronze coins

https://ibb.co/dBPnOc
https://ibb.co/gO08Dc

taxma,

you connected the loop ring to mobile with audio jack?
The loop ring is similar to audio speaker...

WM6,

I thought the same as you did a few years ago.
After having tried "in the field" a great variety of circuits, the last one was a circuit that works like the models of the brand "compass" ... I mean the same type of signal transmitted.
The result (for me) was that it worked! (Although you do not believe it)
In my country is said a phrase "believe or burst"..

I don t connect enything,the mini loop it is from old video player ,

the mini loop of old video player is connected to the phone audio output or not ?

No no no:ΡΕ

I did not understand anything :angry:

Whrong emoticon sorry:)

???:angry: ???

error emoticon :angry:

Of course it worked.

Its drawback is inability to find something valuable at distance.

I am a fan of dowsing rod , more détails :razz:

:angry::angry::angry:

the problem it is my english,i can not explane good :χαχαχα:

use the translator and photos :angry:

abdou,
for example if you want to generate a 5Khz (output from 4017), you need to feed the 4017 (pin 14) with an oscilator frequency of 20Khz.
The VR1, regulate the output amplitud.

Thank you , I also want to know the connection of the coil and the telescopic antenna ???

5-6 turns and together with the mini coil,very simple and stupid but work fine

https://ibb.co/c1f8ZH


https://youtu.be/rVlO1Q1PXpo

https://ibb.co/hvzSuH

does the telescopic antenna have contact with your hand ???

No ,and i don t use the on off button and the usb,it is a old box from another lrl

https://ibb.co/nFyOJc

perfect, yes there is a wireless connection between mini coil and phone , good idea to have a stable frequency with the phone, but is there a duty cycle command in your phone software???

No it is not!i don t know how this work but work perfect:ΡΕonly this two coils and the sound generator from mobile

I believe that even your bearing is a part of your old video player :lol:

you are a genius, nice LRL with zero money and free energy :lol:

Haha :χαχαχα:

abdou,

The drawing of the coils was simply because the program did not have an antenna component, and I used a coil.
I used a steel wire as antenna, with a length of 14 cm.

do you have a photo of your LRL ???

Hi TAXMA, I have almost finished my LRL, how it is just above the target, is it that the LRL turns without stopping ???

abdou,

I attached photograph

very nice , what are the frequencies used ???

Frequency(Hz) Substance
5000 Gold 24K
5200 Gold 22K
5300 Gold 18K
5550 Gold 14K
8700 Silver 950
9000 Silver 925
12700 Gems
700 Cavity

did you try 30hz-35hz ???

i want to know when we work with this range 30 hz-70 hz and when with this range 5 khz 11khz ???
I think the first without transmitter, and the second with transmitter ???

I tested with the range of 27 to 38Hz and with the 5Khz to 11Khz and gave me better results from 5Khz to 11Khz.
Your test and compare ...

May you try that frequencies please
 

32-33 hz (General gold frequencies - you can find all types of gold but also you find alloys containing gold - Bronze etc.) - it can find fresh gold

53 hz - 8K-14K-18K (Main frequency) You can find alloys too ( but big peaces)
133 hz - 18K-22K-24K old and fresh gold - No alloys
5621 hz - All quarats but mostly 22-24 K and OLD gold

Hi!with 8.700 khz and 5.060 khz i detetect a ring ,i think it is a bronze ring

https://ibb.co/dQEWBd
https://ibb.co/hfYV4y

The best frequency for silver and gold 14k it is the 6khz,i have detect with this frequency coins and ring

Hi Taxma,

have you some theory of why the detector (transmitter) is aligned with the object that is detected?

Hi my friend

i do not know why this is happening,
the antenna oscillates 800-900 mhz through a parallel coil with the mobile, a second acoustic frequency at 6khz helps to locate the metal. I do not know how it happens, but it actually happens:)

Hi Taxma,

thanks for answering.

I was asking you because I have seen that you have developed a lot of electronic devices and you have sophisticated measurement instruments.

I have tried to measure variations of magnetic field and electric (static) without "visible" results.

regards

I'm not electronic but I like to make experiment,with this lrl I hsve detect many times valuable precious metals like ring and silver coin with precision.

taxma1981 I have manufactured this device gives a signal to the place of the metal Is it a way to increase sensitivity and thanks[ATTACH]
[/ATTACH]

Hi!increase the volume of the sound in the generator

Does the transmitter layout work and stick it to the antenna instead of the phone,thanks

You can try without the first coil

You need 5-6 turns with 0.2 mm copper wire,and try with the frequency 6 kh and 8.7 khz..I found with this silver

with the frequency 5 kh and 5.8 khz..I found gold

With this lrl?that's great news

Hi Taxma :) why your phone lrl slowly rotating in the videos , is there something in the box below the phone ?

abdou The box is rolling to the metal entrance frequency. When standing on metal spin, tried a lot of planning is useless This is simple and gave a result. thanks taxma

abdou2014 I tried to send you a full mailbox message

U can send now :)

Now i work with this lrl

https://youtu.be/TrCkAjY3lXc

is there anyone who knows the Search frequency
of Metal Zinc ?

Pls i need the frequency list of metals. CG lo

Very nice frequency it is 9046 khz (square) with this i detect silver-bronze

9046 Hz or 9046 Khz ???

ha
 

;)

9046 hz

Can you please give us the frequencies of gold,silver,copper and iron.
Best regards to

I do not believe there is a frequency for every metal,i use for gold-silver-bronze 8900-9100 hz..

Electroscope lrl
 

Hi taxma1981 and friends

I use your system of frequency with electroscope 20 with power turned OFF.
Did you suggest to remove the battery from electroscope or turn power OFF is suffisant.?
Second question pls, from what distance your system can detect a medium tresor of gold ?.

Best regards

i think 50-100 meter it is ok:)

I have a new lrl very simple but work fine,use a dds generator with a transmitter 433 mhz and a receiver 433 with the ground in your hand

Hello, this option is also on the rotary knob?

Hi taxam1981
Thanks for your reply.
Is your lrl products for sales and can we order some units and what is the prices .
BR

there is not rotary button option

hi!I have made one and i must to do some tests first to sell it...With this simple lrl i have find 4 times silver coins

It is good that you are a man of humor

we need humor

Frequence on air snd frequence under grounf
 

Dear friends

For the SAME OBJECT, is its frequency on air same at its frequency 30 cm under ground .
For ex. gold or bronze or copper...

in the first photograph the silver detection area,in the second photograph my new lrl with the long range 1000 meter 433 mhz transmitter and receiver,in the third photograph a scan from my amateur magnetometer-gradiometer,in the cycle i found the silver coins,this point have the minimum signal from the magnetometer
https://ibb.co/w08SyNh
https://ibb.co/1rwc9Rh
https://ibb.co/WzDz60b

third photograph scan
 

Dear sir
In the third photograph scan from your amateur magnetometer. What the brand name of the machine used .

This is a magnetometer made in taxma1981:χαχαχα:

https://ibb.co/09dXZkT
https://ibb.co/NtdxDgV

Silver frequency in the NMR periodic table
 

Dear friends
As you noted before that the NMR frequency of gold is 1745.
Pls what the frequency of silver in the same table

LRL taxma. Is detect mineral rocks.?
 

Dear Taxma1981 and friends.

Is LRL taxma detect the mineral rocks under some frequencies?
And with what range of frequency, i can solve this problem.
Best Regards

Hi!what frequency do you use with your lrl?

Mineral rock frequency
 

Hi , good morning
I use many frequencies , all under test.
Otherwise my friend use the electroscope machine as antenna with turned power OFF.
we used frequencies for gold 32-35 also 77-79 also 5400-6000.
Also 700-800 for cave.
Its problem to test 20000 frequencies.
I am interest im cave.
Gold.
Or atlest any buried real metal but not mineral rock because any metal in cave sure have value ,
Big value..

What you suggest as real frequencies for some metals and to isolate these rocks.?
Thank you in advance.

hi!!!i don't look gold in caves and physical gold and i don't know a frequency for this ,for better results i use frequency bettwen 8.700-9.100 khz.If i am in a good area i can detect silver,copper and gold with this band,you can't detect only a one metal with a frequency:)This is the foto from my lrl it is work with 9.046 khz and i have already found silver:ΡΕ
the data it is from my magnrtometer ,with my lrl i detect the silver and with my magnetometer the point

https://ibb.co/x26c2mP
https://ibb.co/sq1p3tT
https://ibb.co/gZ18h6H
https://ibb.co/r5XdhfG
https://ibb.co/7pSsQGg

Hi taxma1981
Thank you for yr reply.
I use the device ELECTROSCOPE as antenna without power ON.
During my testing and contacts with colleagues, each device has its own frequency related to the way it is made, the form of the antenna etc.
It is therefore useless to mention frequency numbers.
My LRL indicate gold and silver with a frequency of about 79 and about 5200
Caved about 725.

Thanks

Do you have a foto from you lrl?

Hi friend
It is just the Electroscope device with mobile up the antenna.

If you check all the frequencies mentioned by all members in all forums. Do not find two similar frequencies. They are all different.
I will send the photo after few minutes

Best Regards

Hi

Hi!Each person fits a different frequency

Hi
It may be related to the researcher or user, although it is an electronic or electrical device does not touch the hand of the user. Conclusion, every LRL/User having a different frequency.

Hi

Finally, you are right , each person/LRL fits a different frequency.

Taxna1981 your inbox is full :D

Ok!Now i'm ready:χαχαχα:

Hi all friends

Is your systems detect water as metal target.?
What the frequency of water?

Antenas ionicas
 

The biggest question for the operation of an antenna is sensitivity because the buried gold had emitted diverse forces of weak and strong fields where that is the secret for an ionic that renders and one that does not lend him diction if it does not lend

just metal I'm looking for, I do not know frequency for water

Test with 12.515 khz

https://ibb.co/xYCB6S9
https://ibb.co/NSHS0Zd
https://ibb.co/h2BF42V
https://ibb.co/v10MZtC

Hi Friend

The 12516. It is frequency for what metal ?

randomly test frequency

Golden ratio celtic rods

Ancient greek lrl with the gold number F 1.618
https://i.ibb.co/sPqvczQ/20190522-185627.jpg




http://www.ploumistos.com/2017/09/1618.html?m=1

Eu n?o creio em radiestesia mas em uma ciencia por tras dela

Aos novatos antena ionica existe mas tem que descobrir

Please read the forum rules -> Basic Rules of the Forums
and make your posts in English.

Sorry for friends

Is antenna connected directly to phone
 

Dear taxma1981 and friends

In you LRL systems, is it necessary to connect the antenna directly to mobile
or it is sufficient to have the phone above the
antenna.
Pls clarify this matter.
Thanks.

Hi!you do not need to connect the mobile

Type of wave for metal and caves
 

Hi Taxma1981
For metal and for caves,
What type of wave must be used .
Square or sine......

Square or sine or triangle
or sawtooth.

Hi!I use only square

That was my last find with my lrl and my magnetometer,lot of othoman silver coins,it is was with 9.046 khz

https://ibb.co/s54xFM0
https://ibb.co/vPjkN9K
https://ibb.co/QM4GNbF
https://ibb.co/QXqY8XT

Hi taxma1981
Thanks for your answer.

Ok square waves for metal.
But for caves , is it also square ?

700-800 herz sinus

Ithink sine wave is best than square one because the quality of the wave and all tracker work with this wave

New find area with this lrl😉

https://i.ibb.co/pJ79cqf/rtrt.jpg https://i.ibb.co/99SLRKg/reter5t.jpg https://i.ibb.co/VTwhHzx/njlk.jpg https://i.ibb.co/8D7tBRQ/20190709-000438.jpg https://i.ibb.co/kQKm7gQ/kjlkjkl.jpg https://i.ibb.co/G7cxSfF/20190708-204211.jpg

What is it mr taxima ist iron or what and how much is tool of it 5cm or10cm and Weight how much ist up one kilo

Deal mr taxima i want to ask you about frequency for gold an example the same frequency used for all contry or different , and whats best method to use with metal to give frequency as old metal ,

Hi!for me we don t have a frequency only for gold,you cab try with 8.7 khz 9 khz and 12.515 khz

Hi Taxma
If you don,t have frequency only for gold.
What frequency you use for a general metal
Or for a precious metal.?
Thanks and best regards.

There is no common metal frequency. Each substance has its own frequency. And who managed to pick up this frequency is kept secret as the tampliera holy grail.

and then how do you explain that with a frequency I found silver,gold ,copper?on the ground the frequency has to do with the degree, the object size and the shape of the material

Ie you use with success one frequency for copper, silver, gold, iron, and so on.

Hi Taxma, hi all friends

If Freq. Depend on the quality and degree and size of object , and no frequency specified or hub for gold or precious metal in general.
What frequency i can use for detect metal or gold or ....
thanks and best regards.

In the same area i found silver coins ,a gold small coin with the same frequency 9.046 khz..How can you explain this?

I have no explanation for your device with a telephone. In order to explain this, you need to work with the device. And what would work to collect. And to collect no data on the coil that above the antenna. And spinning the reel of the bald is only time to lose. What data is this coil ????? To tamu from your videos you can see that you are working with a magnetomiter examining the terrain and mapping the anomalies. And then go with the frame. In terms of frequencies, this information sounded on the forum from people who allegedly managed to repeat Alonso PD. And the table is on the forum, the type of metal and frequency.

Freq. 9046 Hz
 

Hi Taxma , Hi friends
First at all , thank you for you quick assistance.

Otherwise, Whatever you found in Freq. 9046 ,
Can you friendly explain to us , how and why you select this 9046 Hz exactly and
Not 9050 for example ?
Some secrets are invisible.

Hi!it was purely a matter of chance

Mobail generator
 

It is used mainly in Iran and fake technology mainly sold by fake seller in the region.

Here are some similar frequencies. Scroll down the page a ways.

https://www.geotech1.com/cgi-bin/pag...cope/index.dat

Hi!I use 9 khz for gold and 6 for silver but i think the freguency it is not standar for all people.....

what do you mean when talking about "standard frequency" ?
could you plz explain a little dude

yeah but you need more resolution, 555 is not good for LRL's.
try some DDS generator

For example with 6 khz i found silver ok?For other people
this frequncy don t work fine for silver

Hand Rods
 

Hi Taxma , this is my Hand Rods with simple Software and it is with small box and put to waist when use , for searching Cave , Gold ,and Silver for short distance up to 20 -100m (if is big Object 100m), Can you use also from this System . :(

When I use RODs system , my only problem is Minerals , but otherwise very good works or locating ...

I will try thanks

What You think for location of Minerals , how will removing find of Minerals ?

the problem with minerals has to do with the operating frequency I think

Yes I know that not is from operating frequency , but What is solution of this problem for remove when use Rods , Does you know ?
I think with use a special permanent Ferrite with many tours in Out of Signal , but I am not sure .
Some people use stones, attach to the Rods , but it's not scientific

I"am build taxma1981 dowsing lrl ,i detect gemes

Try with the 9.046 khz for gold

Thank you brother

I use gemes 12700,diamond 12125

6 khz for silver 8.7 for bronze

ok,

Normally 8.7khz silver frequency

Gold stone frequency

Finding minerals (stones)using 9046hz what is the solution do it?

Finding of minerals not is from operation frequency , Try to use serial Ferrite with many tours
before signal Output , also can Try with use one 10k or 100k potansiometer connected of output to gnd , for elimination of small signals . :)

Operation Frequency is importand for find or Resonant of desired, preferred Metal .
, not for elimination of mineralisation :nono:

Thank you brother

This circuit working methods please

This All using frequency is Subharmonic of main Resonant Frequency of different Metals , for example :
if main resonant frequency of Gold is xx.xxx,xxx Mhz , so it will be / 2 , some time /3 ,
10.Mhz /2= 5Mhz / 2 = 2.5 Mhz ......../2 ....Khz ..... and down to Hz .
When is in Khz or Hz station it will be mixed with Regional or with Earth long wave ,
so You will Receive Gold ions or Signal with set of this Wave , not only with Receiver ,
also when Transmit this resonant wave your Rod can find or moving to this Signal . :)
Many Years I have experiment with this All .
Only problem is elimination of minerals for find wanted Metal .

today i found a little treasure with a radio AM , you tune the radio near a station for example the station broadcasts 630 khz,settings the reception just above or below the station, connect a rotating antenna to the radio antenna and you are ready.

https://ibb.co/gzPsjRd

Very Good ,
Why Your Antenna is in two way Forward and Back position . Must be only in one Way , for know where is target way .

the rear antennas are always closed, only the front one opens

Ok , sens only alone Antenna , other two is closed .

this is a good radio for experiments, it can receive signal from 150 khz

https://ibb.co/SyC5LcK

Why You not use FM band instead AM , in AM band have very false signals .

I think with the AM it is better

you worked in the ferrite antenna band and you connected the telescopic antenna as dowsing

what are you following? the sound of the radio or the orientation of the telescopic antenna ???

Both, but more the orientation of the antenna....I do not know how it is work but it really works

Please drawing diagram?

For build Rods with sending Frequency , first You need build one Oscillator generator with NE555 or with PIC , after Output of this Generator will need to connection to two hand Rods (Left and Right ) , but here important is using Gen. Resonant Frequency for wanted Metal ,
You can see one example from my old Freq RODs system .

http://www.longrangelocators.com/for...ad.php?t=19283

Regards .

Thank you bro

How many This layout conected to antenna?

Behind a frequency there are several factors for a dowing to be perfect it just can't do a good job there has to be polarization plus calibration of the substance

When you use a common antenna the doors are simply open to energies. Good results are achieved by closing, with the polarization and calibration of an energy of a certain substance

Achieved by closing , May be with use Carbone for Filter mineralization or calibration for one
Metal ??

Douglass what think for my old Dowsing Rod system , what necessary in circuit ?
http://www.longrangelocators.com/for...ad.php?t=19283

Very good an antenna like yours works and you know it, like many here that have already found something. But there is another parallel world behind it that when opening with the system you extract the (dna) of the substance, at the same time controlling the forces of energy looking for what is worth .Gold emits thousands of these forces it is necessary to separate, not with a common antenna.

The link does not open

Without polarization, the antenna will be open to receive many ore signals

Ok , maybe You say about Metaphysical Energy , that when we open this door , it will be witout countrol for We ??
But how we can open this Door without Know, How is this making ??

Maybe when we using Dowsing Rod so mixing with Human Energy and poke or goading this Anomaly energy , because in Word have very different energy . ;)

A common antenna is transformed with this system, marking only objects buried for many years. You enter the world of the phenomenon and come to understand what happens with this energy, perhaps not all because it is complex. I am still learning since I discovered all this. I just want to make it clear believe in the antennas they can do a lot more than we think. Ordinary science cannot explain

All is Reaction of Aethers wave .

https://energywavetheory.com/explanations/aether/

I have experimented a lot with the dowsing and my conclusion is that it always takes you to metal, the fact that you may not find something if you put a metal detector on the end point does not mean that you did not catch metal with the dowsing,can be next to or at a greater depth .... Frequency also for me does not matter because it has to do with the earth's magnetic field which changes per point....Maybe combining a magnetometer with dowsing will work perfectly to create a code that will change the frequency with each change of magnetic field.:)

Gold quartz ores microscope, invisible, forms phenomena, strong that can deceive any operator, without its proper calibration. Even good electronic directionals.

How is this proper calibration for not find Gold quartz minerals .

Whoever handles the antenna knows how annoying these quartz signals are. This generates very strong fields. But with a common antenna you can't eliminate these signals, friend. The system I use eliminates:lol:

Ok Dear , I understand , Your system for eliminate of unwanted gold minerals for Dowsing Rod is Secret . :Д
I know so that , many people connected serial Carbon to Dowsing Rod for this Elimination .

:D

As Esteban said in this forum, experimenting you discover a lot. This works as simple doping maybe closes some energy. But always leave other doors open, the thing is more (Complex)

Finging with one Rod
 

Hi Douglass , Today I make different test with one Rod and with one sample Metal , in this test I find one phenomenon place from 100 meter with one Rod , after , in this place I make test also with my PD from 200m and I see that also find same phenomenon place , this was very interesting test for me . So was test of one Rod instead PD , without any wrong finding .
No Minerals , No Oxidation . Only Big phenomenon . 8)

Very good um how did you set up your antenna? PD scored 200 meters you don't need a selective antenna your PD does the job:lol:

Setting of Rod is simple it use human energy for find .

Good evening, they could work on the rodscopes frequencies from 100 khz to 1 mhz;?I located a larger piece of lead old with 100khz

https://ibb.co/k6KpM9Y
https://ibb.co/jZcDXF1

After reading all the comments, I did not see the specific schematic diagram of the production method of the LrL circuit and the L rod. Can anyone share a circuit and production method? Thank you