Mineoro DC2008
 

Hi.
Today a friend gave me a DC2008 to modify it. He wants to replace the sensitivity potentiometer with a multiturn one.
I opened it and i saw that the previous owner had open it and had remove the black resin from the receiver pcb.
Also i saw that there is a problem with the oscillator (2N2646).
So i said that it is time for a reverse engineering until i receive the multiturn potentiometer.
I Must tell that my friend found some small objects (ancient coins etc..) with it at small depth (10... 30 cm).
I attach some photos from it...

Regards:)

I forgot to say that this LRL has not a microproccesor so it is a good time to make a clone of it.
Schematic seems to be very easy.

:):)

Hi Geo


The DC2008 seems to me the MINEORO who can locate some objects,with other models no lucky for me...

Its very strange that this DC2008 not have multiturn pot. ,all DC2008 i saw is using the multiturn,also the one i have ...

Is interesting if you can find in what frequency this MINEORO is working.

Hi Morgan.
Maybe the previous owner to replace the potentiometer, who knows????
This model is with the IR led near to ion champer.
I check it with generator and it is tuned near to 124 Khz. When i will finish it i"ll check exactly for the working frequency.
:)

This LRL is very strange!!!.
I can't understand how it locate coins with a receiver that has only a 3 stages (transistors) amplifier followed by a LM386 as a pro and a 555.
That is all.
Maybe the field at ancient coins is very strong.....
Now understand why when i visited Morgan at Portugal the DC2008 was not able to locate the objects except the gold medal but with the sensitivity at full.
Maybe with a better receiver to have better results

:):)

Hello everybody, hello geo!
I think I understand how he works this device, I have constructed else like brioche but without electronics ..

** It's simple. The light type l e d makes light impinging on a semiconductor. Converted to the semiconductor and conductive filter.
which can be seen the rare energy emitted the buried metal!

We believe we can help someone what I said! :)

the DC2008 is the mineoro model i use and can pick gold objects,anyway at very short distances and very problematic for the pinpointing.
The buried test gold medal was located in this particular day,however most of the times is not possible to locate.
One other interesting thing,when the DC2008 batteries went to 16 V,the LRL become extremly erratic,anyway in the instructions they said is to change batt. at 12V...

I reversed the pcb and now i have the schematic. I am sure that if i connect at the place of receiver the passive receiver of PD it will have better results. When i will draw the schematic i "ll attach it here for the members.
BTW... your DC2008 at who distance detect the batery spark???

Regards

DC2008 use a LM317P as voltage regulator from 18v to 9v. So normally any input voltage from 12v and higher must be ok.

Bravo Geo!
I can not wait a full report!
Thanks in advance!
Regards!
Sneshko

Sneshko wait some days...
:)

1,5 V Battery spark 60 cm.
I remember the other model DC 2006 its 50 cm
and the PDC 210 is 1,00 m

Same distance with the DC2008 that i have now. On winter i will construct one and i"ll play with other receiver. I am sure that it will give good results at big objects. Now i try to find pot core for the input of the loop. Maybe a magnetic amplifier with ICs to be better.
:)

If the owner allow me, i will connect a switch in series with "ion champer" so to ensure when it detect an object, what is this that locate it, the ion champer or the passive receiver or both. If the champer don't doing anything (as i believe) then it is very easy for everyone to make a clone.

:)

Check this modifications on DC2008 by Esteban :


Attachment 18102

Attachment 18103

This modification made by Esteban so to locate fresh objects from small distance. If champer don't make anything (i am sure) then Mineoro is a simple pistol as PDK inside a beutiful box and at a very very high price. I am curious what will happend if i"ll connect the loop with the pot core at the input of PDK:cool:

Here is the schematic from the receiver of DC2008. For begining there are not values of the components but i work for it and for the full schematic.

Enjoy :):):)

This (front-end) remind me on some Gardiner MD design.
Though, as far I remember, Gardiner use Hartley in his design and here is Colpitts.

Hi Geo,

One small correction ... that should be "chamber", not "champer". ;)

Thanks.

:):)

The oscillator of DC2008 has at emitter of oscillator a signal of about 100mv. I think that it is a big signal for a receiver of this type. It need a strong signal so to see it as "anomaly" at the output.

Btw.. any easy way to check the chamber if it detects ions???

:)

Hi Geo

You right,MINEORO is VERY EXPENSIVE !

It cost me a two year of my work savings...And what i found with DC2008 is very little...

Thanks for the schematic

Hi geo.
You believe that it is trusted that the locator?
Provides assistance in metal detecting?

I ask because I have the same machine
I was thinking and I dig the black resin
thanks

Hi Geo,
I think this is a good idea to check if the chamber detects ions.
According to Mineoro, there are gold love-ions that are in the air 2 meters above where gold is buried.
Mineoro theory is that the gold love-ions make tiny sparks when they neutralize in the air, and these sparks in the air will send an electronic signal through the air to the chamber to cause some sparks in the chamber.
Then the sparks in the chamber sends a signal to the oscillator, which results in beeps when gold love-ions are near to the locator.

When, we look at the construction of a Mineoro chamber, we see it has a pulsed voltage sent to one side, and the other side is coupled to the input of the oscillator with a very small capacitive coupling.
This tells us that whatever signal that comes from this chamber is very small, high frequency, like a spark.
It also tells us that if the chamber actually causes beeps, then a small capacitance could transfer the signal to the oscillator stage.
In order to properly test whether this chamber does anything, you cannot use a simple switch, because the capacitance in the switch contacts might allow some of the signal to pass even when the switch is turned off.
Furthermore, the chamber might send a signal to the oscillator if the wires are completely disconnected from the circuit, just from the capacitance through the air, and to the conductors in the circuit board.

So how do we test? http://www.geotech1.com/forums/image...s/remember.gif

Here is how I would test it:
1. First test the locator with the chamber connected as normal to see if it will beep at some known targets, and mark the distance you can find detection.
2. Open the locator and un-solder the three wire connections for the chamber, then short all three of them together.
Wrap some tape around the wires so they will stay shorted together.
3. Put aluminum foil over the shorted wires... Make certain the foil covers all of the back side of the chamber and all shorted wires for a shield.
This will serve to stop any stray gold love-ions from entering the back of the chamber and causing sparks inside the chamber.
4. Put another piece of aluminum foil on the outside of the chamber where it is seen at the front of the box.
This will serve to shield the front side from gold love-ions entering the chamber and causing sparks.
5. Now turn on the locator and check to see if there is any change in the beeping that you tested before, when the chamber was connected as normal.

You could solder some small connectors on the ends of the chamber wires, and solder 3 short wires with matching connectors on the circuit board to make it easy to disconnect the wires from the chamber.
Then you can disconnect the chamber and reconnect it easily when you want to make more tests.
Of course, you will remove these connectors when you are done testing, and return the locator to the owner.
The extra trouble to short the wires together and to shield the chamber will produce a test that can convince me whether the gold love-ion theory is true or not.

Best Wishes, :)
J_P

Hi.
The owner said me he found many copper and silver coins. The coins was directly in the ground and was ancient!!! He did not find any object buried for less than 300 years. Because the loop is big, i believe that it will give better results at big objects.

Hi J_P.

The problem is to make the Mineoro to beep at any known target.
Maybe today or tommorow i"ll visit some friends who have buried gold for many years at their house, so to see if it beeps. If it beeps then i will inform you and i"ll make the test.

Regards:)

thanks geo
a question
L1 is the market?
Can I buy from a local electronics store?

hi
 

hi at everyone i hope this help to became a perfect pd
best reguards manolo

Hi. I don't know if you can find it at market but you can make one.
:)

Hi Manolo, how are you??

This schematic is from FG79A and it reversed and drawned by me.

Regards:)

Can you show me a drawing, photograph, to see about how it is constructed.

:)[/QUOTE]



Μπορεις να μου δείξεις κάποιο σχέδιο , η φωτογραφια , να δω περίπου πως κατασκευαζεται.

Το δικο μου είναι 5mH αλλα εκέι που συνδέεται στο συρμα , Στα δύο κομματια χαλκου ειναι μηδενική η επαγωγή .
γνωρίζεις τι γίνεται εκεί ;
μήπως η χάλκινη λαμαρινα περικλειει το εσωτερικο πηνίο;
Παντως θα με βοηθούσε καποιο σχέδιο εαν μπορεις να μου δείξεις
ευχαριστώ.

Can you show me a drawing, photograph, to see about how it is constructed.

Mine is 5mH but where the wire is connected, the two pieces of copper are zero induction.
know what is happening there?
Does the copper sheet metal enclosed inside the coil?
However would help me a plan if you can show me
Thank you.

hi
 

hi geo very well now i find a job and i have a time to restart my passion oftreasure in the oter forum a people find a modification to mineoro and now he siad that work

Μπορεις να μου δείξεις κάποιο σχέδιο , η φωτογραφια , να δω περίπου πως κατασκευαζεται.

Το δικο μου είναι 5mH αλλα εκέι που συνδέεται στο συρμα , Στα δύο κομματια χαλκου ειναι μηδενική η επαγωγή .
γνωρίζεις τι γίνεται εκεί ;
μήπως η χάλκινη λαμαρινα περικλειει το εσωτερικο πηνίο;
Παντως θα με βοηθούσε καποιο σχέδιο εαν μπορεις να μου δείξεις
ευχαριστώ.

Can you show me a drawing, photograph, to see about how it is constructed.

Mine is 5mH but where the wire is connected, the two pieces of copper are zero induction.
know what is happening there?
Does the copper sheet metal enclosed inside the coil?
However would help me a plan if you can show me
Thank you.[/QUOTE]

Maybe you must remember me for it at "psaxtiria.net" so to answer you with Greek.
:)

Hi Manolo.
Who is this forum???

Regards

Hi J_P.
Yesterday i visited the home of a friend and i tried to locate with Mineoro the buried objects (copper, silver and gold) that he has at his garden. No Results. After it i tried with the Andy Flind Magnetic field detector and i located the copper and silver from 1m. So the phainomenon exist but is is low.
And of course Mineoro has not the ability to detect low signals:razz:

:)

MFD
 

Andy Flind Magnetic field detector:

Hi Geo,
If Mineoro does not have the ability to detect buried metals in the normal condition as received from the factory, then we cannot test to see if it stops performing when you disconnect the chamber.
We can only say the Mineoro cannot detect buried gold, silver, and copper that other detectors can find.

But there is one other test you cam make...
Maybe you can make a copy of the transmitter that Alonso uses, and see if the Mineoro can find it. :rolleyes:

Best wishes, :)
J_P

Hi J_P.
The phainomenon at Greece is not so strong so there is problem for all lrls. But at ancient objects the phainomemon is strong and we have some success. When the owner will take a strong signal with Mineoro he will inform me. Also i connected a switch on the panel so to disconnect the chamber. Now about the Alonso transmitter ... no need because i have some generators for this rule. But the sensitivity is not so good. For example the PDK receives the generator signal from 10m far and the DC2008 only from 2m.

Regards:)

Maybe you must remember me for it at "psaxtiria.net" so to answer you with Greek.
:)[/QUOTE]

no geo,
in psaxtiria.net
never spoke together
from this website spoke very old.

If you can help with the question above thanks.
I do not want to hurt the ferrite.

Sorry for my bad english...:)
Λυπαμαι αλλα τα αγγλικα μου δεν επαρκουν για να σου εξηγησω ακριβως πως να τυλιξεις το πηνιο.

my friends geo
if You want me to send it to my personal EMAIL
fmnotes@yahoo.gr
in GREEK.
Thanks again for your time.

Thanks Geo

I wondering why the Andy Flind not able to locate the gold after locating the silver ???

Hi Morgan.
It is strange because the gold (2 chains) was buried more time.....
But as i said other times at Greece the phainomenon is not strong so the lrls don't work properly. I have buried some ancient silver coins for 20+++ years, the same for some (about 20) copper coins. I have not signal:frown:.
Before 4..5 days i had a PDK2 from a friend, i tried again to locate the coins with it but no results:angry:.
Remember Alonso when visited Greece, he did not locate anything.

Regards:)

discussion
 

this discussion

http://www.buscadores-tesoros.com/t1...hlight=mineoro

Hi Manolo.
I can't see anything and the translator don't work:angry:
Does i must register so to allow me to see the attached schematics ???

Regards:)

yes,i know from one friend that all the mineoro test in Greece was bad results.

About the PDK-2 ,the test with silver coins,here my questions :

1-the silver coins was buried with salt (to acelerate the Phenomenon) or not ?

2-The PDK-2 test was made before the VHF waves finish in Greece,or after with the local DIGITAL system ?

It is great if you check again,but using my last method for calibration PDK -2 in limit.
The test must be done in all directions,sometimes the metal emit only in one direction.


Regards

ok,ignore the question 2,i see 4 or 5 days ago ,already no VHF in Greece.
but using the PDK-2 in the limit of the sensitivity it can pick the targets,here yes,maybe in your country is possible too,becouse i receive emails of sucessful findings.

I saw the forum,i can read spanish.

the modificated mineoro belong to our friend robalocarapanda,he said have foud 3 gold coins of carolus IIII,with the modification...

hi
 

hi morgan you know this modification?

Hi manolo.
As Hugo wrote he replaced the receiver with one more sensitive.
I work on it but i am afraid that i need some time....

:)Regards

Hi.
All coins was buried without salt.
Now i sent the PDK2 back to the owner. I have the same results with mine....
Now i work on a new lrl that will be more sensitive from PDK2... and will have the ability to replace the PDK or to put it inside a Mineoro and to make it very strong. I believe to have good results.

Regards

did you check the PDK-2 frequency in your oscilloscope ?
i´m interested to know,i think is aroud 125-150 KHz ?

regards

building one simple EMF locator,you will have one LRL better than mineoro ,and low cost...

the answer about the PDK-2,i keep for me the modifications,but your friend Geo can clarify about the schematic,he build one PDK some years ago. Is 10 times more powerfull than the mineoro.

I checked it with a generator and itis tuned at 78.8 Khz.
Another member that has one pdk measured it and these is tuned at 81 Khz.
Mineoro DC2008 is tuned at 133.6Khz.

Regards

Ok, and my PDK-2 is tuned 77.7 KHz,this is normal.

However ,in other PDK´s is 130-150 KHz, the frequencies for precious metal are from 62 KHz to 150 KHz,in between this frequencies the locator behavior is more or less selective to gold.
For example,more high,more selective.

If frequency is upper 150Khz then it is more sensitive to aluminium

Hi.
Now i have a FG80 for modification.
What i saw.... it's the same locator with the DC2008. The only difference is the IR led that the FG80 has in the front panel but i don't think if it works.
All the other are the same with 2008.
Also it has different frequency...

Regards

about the MINEORO
 

Geo,here is something interesting :

MINEORO model PDC 210 super -- can locate 1,5v battery spark,if you touch the ionic chamber it emit beeps,not locate fresh gold.


model DC2006 -- can locate the 1,5V spark,locate your hand if pass in front of the Ion. chamber,not locate fresh gold.

model DC2008 -- can locate the 1,5V spark,not locate the hand in front,locate fresh gold in front of the large antenna.

model DCH85 -- not locate the 1,5V spark,locate the hand in front of antenna,not locate fresh gold.


I cant say that MINEORO is a fraud,they are LRL´s that need the special weather conditions to pick a gold target.
I have a few objects found with my DC2008,but was impossible to pinpoint them,need the MD.
Using and testing the DC2006 i found some weeks ago one old silver plated fork,distance 2 m,deep 20 cm,humidity 10%,it give me one area of 1 square meter,pinpoint using MD.
Sure it was the factor low humidity and advanced age of the fork(200 years underground) who make the DC2006 react to the object,i note also that it can pick the target only in the limit of sensitivity,otherwise not possible.

It was my first object found with MINEORO DC2006 ,i bought this LRL in 2006...

Mineoro is a real LRL but it is a very BAD lrl.
I believe that with a good modification on the receiver it will be a good lrl. The fact that it can locate buried objects from distance it means that has a receiver who can locate the "gold signal", a very "strange" signal. Now about the bad distance..... it is from low sensitivity.

Thank for your info.
Regards

one second ,
Mr.Morgan , you were saying that PDK is working with VHF reflections,
but above letters, you are saying that it work s between 130-150khz
not Mhz , how can one antenna be tuned for two different EMF regions?
I am confused sir?
If I understood your words wrong, forgive me..

Hello my friend George!
* really would like to know if the chamber indeed helping response.
Please let me know ...
THANKS!
;)

Hi kosta.
I am not sure yet, i will inform you when i"ll be sure

Regards:)

I.m even more confused than you about that.

Maybe the VHF that was working here with 175.25 MHz to 210.25 MHz this waves reinforced the electromagnetic field around the buried gold. Other theory is the VHF is the TRANSMITTER antenna and the PDK the RECEIVER and the buried object in between is signal relection.

The real fact is at 24-04-2012 the VHF transmittion stop in my country,and in the they after i note the PDK is not the same losing 50% of the LRL power. In Greece one friend reports the same problem when they finish VHF...

Morgan
where you from? where do you live, I wonder the VHF signal losen area .

remove the epoxy resine
 

hello GEO.

how I can remove the epoxy from a circuit.

My circuit is part of a Mineoro DC2008.

You have Mineoro DC2008 scheme?.


Regards.

DrTech, Mexico.

DC2008 good resolution images
 

Hi everybody, i need a good resolution of lmages of dc2008 from front and back side of it. If available then please post it as well as drawn schematics with values if any. Lets try to clone mineoro's pride whether functional or not. The pictures already posted in this thread is not sufficient to warrant cloning, it has no pictures on the back of the back receiver. I think its time for Morgan to post the good resolution images here.

Regads...

Hi. somewhere in forum i put the receiver of DC2008. I have not all the value of components because it was a hard work. Had to be desold all the components. Why you need to remove the epoxy????. A good way is to warms and cools it many times.

i have this i hope it help you

how you will schedule the memory atmel?

Thanks GEO,
Why you need to remove the epoxy????. Mineoro "NO POWER ON"

I've fixed some problems that had mineoro DC2008.

1. - Potentiometer not connected correctly.
2. - battery Holders broken.
3. - Ground wire with false contacts.

Mineoro POWER ON
Detects a spark 1.5V to 60cm.

Can anyone tell me if the operation is normal DC2008. that can detect a spark 1.5 to 60cm.

This diagram does not correspond to mineoro DC2008.

The DC2008 does not have the ATMEL CHIP

the problem is,i lost the images...

have this one only

Attachment 18472

Hi Manolo.
This schematic drawn by me and it is from FG79. Not so good model, FG80 is better and has different schematic.

Regards:)

Hi.
60 cm is OK for FG80 or DC2008.

Regards

Can you write the values of this circuit?

I am sorry but after two crashes on HD there is n't nothing. I lost most of my work.
This is one of the reasons that i don't write so often.... and no mood to begin collecting schematics again....:angry:

hi, i can recover geo hdd data. If hdd stops, send it to me I can do data recovery.

Ohhh.... they gone for scrap..... time ago.
If will looking for maybe to find some dvds with schematics.
Other problem..... my pc has n't dvd player now :lol::lol:
Before one week my printer stop to work :lol:.
Maybe next week my pc stop working... so will be time to stop writing here :lol:

2022 did'nt come well :angry:

:)

I am doing data recovery business in Turkey. I could help with this.

!

Geo, I can also send you my files that i collected over the years in a stick if you like.

Mineoro DC2008
 

Hello! I will be very grateful if you send me everything about Mineoro DC2008

I ll search tonight my friend to see what i have got.;)

Thank you, but it's too late. HDs gone with garbage...:frown:

Jeg thank you.
Now there is n't reason. I have construct most of the existing schematics so now there isn't reason for the schematics. The years gone... and now no mood for constructions, also no mood for T.Hunting...:frown::frown:

btw.... maybe a trip to "Φουρνους" for fishing to give me energy :lol::lol:

Any time my friend!!! Any time...;)

Thank you!!!

Sorry bro. This circuit never published. Check your messages.

Hey Geo

Don't bother yourself to much. It will be good days for yours T.Hunting. You had have done more than 30 lrl's i have seen in your lab and all works - some are the best with special ferrite, some excellent like PD clone, others are normal and could do a job - a lot of small yellow coins.


Regards from the mountains. :)

Dragan i don't worry!!!:lol:
The best treasure is the health!!!

:):)

hello what is the transformer value primary 380uh secondary value in geo diagram?

Picture below

https://ibb.co/qdxCSXH

Hey Geo
What is your final conclusion on this? Detection happens through the loops or through the chamber?:oh:

Oscillation at the input of the receiver is too high as you have already seen. So it looks like that the signal coming from chamber is negligible and probably doesn't contribute as much as i was thinking!! I was ready to connect a switch so to separate the two circuits, but then i saw that you have already done it! (as always!!!:lol:)

ps. Does anyone know the exact length and diameter of the brass tip at the chamber circuit?


Regards

Try to make 2mH for secondary and wind one turn for primary.
Permability must be bigger than 400 (2000 is very good).

From my experiment detection happens through the loop. Maybe the brass tip works as antenna for electric field detection!!! (maybe).

Thank you Geo. Your experience is valuable.
Yes it is for electric field detection but everything show it doesn't work as intended. Mineoro failed at this point.

Is it possible to draw as a picture?

Ok, I found the answer to my question.

What you don't understand????
First buy a Pot Core with permability near to 2000.
2nd.. on it wind L1. L1 must have inductance 2mH. Wire has 0.2mm diameter.
Up on this coil wind one turn and connect it with big loop. This turn must be near to 1mm diameter.

That's all

thanks geo.

I have a nice schematic like this and you will like it. Frequency controlled. Between 15khz and 36khz.
I published some of it.

hello geo
Can we adapt this logic in dc2008 to this circuit?

No, this is a simple BFO and has nothing to do with the first stage of Mineoro or with the working principle of a lrl..

Actually an electrostatic charges detector. If someone rubs a pvc pipe with a cloth, device will beep.:)

this system marks everything electrostatic!..so it is not what we are looking for in this forum...

The positive is that the Big loop don't catches electrostatics signals but only electromagnetics..

Hi friends

What is your opinion for using plastic enclosure for Mineoro device? Have you tried it? Did you notice any difference in operation? Does it degrade the operation of the device due to the fact that creates more electrostatics than wood??

Geo i have noticed that my Mineoro needs some time to stabilize its output amplitude. It needs some minutes during of which the amplitude rises and i have to correct threshold again for stopping it beeping. As i see it, there must be a drifting due to temperature. LM317 is on a heatsink, so i suspect the quality of my electrolytic caps. They are not of the best quality. What do you think about that? Have you seen this again?

Regards

Yes , LW from RF station ;)
Plastic Tube is İonic Receiver for very High Frequency :Д

hi what did you find with geo.Dc2008. Would you help me with this topic.?

Sorry but i don't understand what u mean..

https://longrangelocators.com/forums...cons/icon1.gif GEO's Mineoro DC2008
Hi.
Today a friend gave me a DC2008 to modify it. He wants to replace the sensitivity potentiometer with a multiturn one.
I opened it and i saw that the previous owner had open it and had remove the black resin from the receiver pcb.
Also i saw that there is a problem with the oscillator (2N2646).
So i said that it is time for a reverse engineering until i receive the multiturn potentiometer.
I Must tell that my friend found some small objects (ancient coins etc..) with it at small depth (10... 30 cm).
I attach some photos from it...

Regards


HI GEO
Do you have components values or high resolution pictures of both sides ?
What is exact stimulator frequency of electrostatic chamber?

2N2646 is an UJT transistor. It means very sharp pulses at output. Right ?

Regards
:)

Hi all


Who could explain connection between static electricity (bipolar charges) and infra-red rays?


Any ideas why Alonso stimulate static chamber with IR-light?


Thank you ! :)

Hello Dragan, how are you!!!!
With ir emmiting tries to enchace the ions that existings near the surface, especially at dark time. I have see FG80 models with one or two or none Ir led, so i believe that this method does n't do nothing.

Regards

Hello Geo :)
I am well thank you.


Did you tried DC2008 without electrostatic chamber, only magnetic and electric receivers. Did he worked or not?


I don't agree with you about ions and IR light.The reason is simple - IR light haven't enough kinetic energy to ionise volume near the surface. If it would be ultraviolet light than yes. I don't think that Alonso have had ultraviolet leds in his devices.


Do you have HQ pcb pictures of DC2008 ?



Regards :)

Another logical variant about IR light and electrostaric chamber/s is that the whole Alonso's story about is "smoke and mirrors". :lol:

Yes i tried without chamber and it was working ok. This is the reason that i believe that ion chamber don't do nothing.
About ir led..... who knows if it is a ultraviolet A or Ir?? UB-a is not visible (if i remember ok).

Regards

Brazilian theory was very simple and clever....
Construct a lrl with 2 or 3 different detectors inside. If one is working some times then we are ok. All the other will be good for difficult understanding.
A good way to protect their secret!!

:):)

Mineoro debunked ! :lol: :lol: :lol:


Magic word - Electrostatic separator

I want to make the totem pd, is there a problem if I put it in a plastic box? Or is it necessary to place it on wood?

:thumb::thumb::thumb:

Hi Aft.
Sorry but i lost my hard disk (Crack) with most schematics inside it years ago. So i don't have schematics anymore :frown:

Maybe Abdou2014 has it!!!

Hi everyone , it's only today that i saw this message, i have all data of FG90, but i tell you one thing, the schematic is less sensitive, and i added a good preamplifier and made it best receiver , after few days i'll try it outside with new tunnings and i tell you the results, and share some info :)

Hi
Please send me only original circuit .
Also I plan design other section .. but first must begin from main circuit . Thank you
My email aft72005.1@gmail.com