Where here show us please that... and please look your private I have send you message about RMS Panel

Nicοlas I can not send you a message, writes that we can not accept messages

Now you can :):):) or look your email i have send you email.

Message I need help Sent Date Read Date
Sent to: taxma1981 10-21-2014 04:30 PM 10-22-2014 08:41 PM
This is my Email ridha.nick@gmail.com
my question is where I can buy the RMS panel

give me link or other Idea and thanks

check your email nicolas

https://www.youtube.com/watch?v=60UnshoMByA



:lol:

Hi Taxma if you make a transmitter is so better to test your Gold Gun

this transmitter is between 0- 100kHz and you can go to 300 Khz it simple to build it

only need make good calcul for value of C and R

F= 1 [1.4xRxC ]

separately transmitter or on the Gold Gan;

Certainly separately and make tracer by gold gun since fews meter ten or twenty to tune it

you can build with three capacitors 1nF for 100Khz other 10nf for 10khz other 100nF for 1 khz

like the fisher 82 khz and 8.2khz and 820 Hz

hear people say it does not work with its own transmitter, How about you; I HAVE COORDINATED 19.58 khz and has importance every day,,sorry for my English

Yes ok I understand that but if not have transmitter in your region you can make that. but I speak about resonance to catch Gold or metal by this frequency
if your gold gun work with this frequency mean receive only the frequency send by transmitter not by metal and that is wrong dear and not find Gold we need the resonance not need frequency of transmitter. here is many VlF transmitter in world

https://www.youtube.com/watch?v=WnoI9c8eqi4&feature=youtu.be Part #1

The point is that a 555 can not do something on his own, nice video NIKOLAS

new antenna 61 mh

http://postimg.org/image/aevocm4kj

I believe I may have gotten the Gold Gun al707 to work--but, I got too close to some power lines...now it has lost most of it's sensitivity. It now needs to be checked out by someone who can replace capacitors etc.

I need Carl to sell me his Gold Gun! :)

I have reason to believe that the Gold Gun is an excellent--and, a workable Receiver, if one can simply get the proper transmitter interfaced with it. As a Stand-Alone, it is of little if any use at all. Before I burned something on the circuit board, I got a reading of 850 mVolts, at just under one mile distance (0.82). It's a known gold mine, owned by a friend, in NE Washington State. It's a complex ore type lode. I got another good reading with my now defunct Gold Gun Al 707--that I have yet to check out, with with my White's Sierra Madre--with 25' or 15' Karbowski coil. I really love that setup. Also have the White's Pulse Scan TDI, with 16' Nugget Finder coil.

While I've had great success with a swivel rod and my transmitters--I have not been content to leave "well enough alone". With my Architraun System, I have been able to get very consistent audible / metered signals, on targets the size of a jewelry box, at three hundred feet. It is all well in the realm of known and established physics. More than that, I do not care to say. If it were broadly known--it would totally revolutionize metal detection systems, forever! It's a cat that could never be put back into the proverbial bag.

I've also learned how to take frequency readings from Google Earth Images. I have named that the Eagletraun System. This too, has proven to be quit successful for me. I actually pinpointed six dore' bars, in Texas, while I was in Central Washington. And, there is much more to that story, that will have to be put on hold, until I can work out an agreement, with the land owner, with respect to the main deposit--which I also pinpointed, with the Eagletraun, from a distance of aprox 2k miles.

David
 

A friend gave me his al-707. Both ferrite rods were broken, as a result of careless handling. It is now pretty much junk. If I could find another one cheap, I would see what I could do with it.

Seems easy enough to replace and rewind the ferrite rods. Pretty sure somewhere there is a schematic that shows what it needed. I haven't worked with one but I know the rods have a spacing between the ends and this might need to be tuned.

Does anyone know in the circuit of the gold gun what is this blue or red cable that starts from the input of the mpf102 and where does it go?


https://ibb.co/kgFyBLq

There is a board on the first page, you will find the answer there.

ground the one input of the coil through a 1 nf capasitor in series;

Right . Amazing installation. It?s probably more convenient for the manufacturer to do this.

For the gold gun 707 and to gain greater sensitivity, touch the male connector (negative) where the meter is connected with your hand, do not use the meter for this test, only use the audio amplifier