does the telescopic antenna have contact with your hand ???

No ,and i don t use the on off button and the usb,it is a old box from another lrl

https://ibb.co/nFyOJc

perfect, yes there is a wireless connection between mini coil and phone , good idea to have a stable frequency with the phone, but is there a duty cycle command in your phone software???

No it is not!i don t know how this work but work perfect:ΡΕonly this two coils and the sound generator from mobile

I believe that even your bearing is a part of your old video player :lol:

you are a genius, nice LRL with zero money and free energy :lol:

Haha :χαχαχα:

abdou,

The drawing of the coils was simply because the program did not have an antenna component, and I used a coil.
I used a steel wire as antenna, with a length of 14 cm.

do you have a photo of your LRL ???

Hi TAXMA, I have almost finished my LRL, how it is just above the target, is it that the LRL turns without stopping ???

abdou,

I attached photograph

very nice , what are the frequencies used ???

Frequency(Hz) Substance
5000 Gold 24K
5200 Gold 22K
5300 Gold 18K
5550 Gold 14K
8700 Silver 950
9000 Silver 925
12700 Gems
700 Cavity

did you try 30hz-35hz ???

i want to know when we work with this range 30 hz-70 hz and when with this range 5 khz 11khz ???
I think the first without transmitter, and the second with transmitter ???

I tested with the range of 27 to 38Hz and with the 5Khz to 11Khz and gave me better results from 5Khz to 11Khz.
Your test and compare ...

May you try that frequencies please
 

32-33 hz (General gold frequencies - you can find all types of gold but also you find alloys containing gold - Bronze etc.) - it can find fresh gold

53 hz - 8K-14K-18K (Main frequency) You can find alloys too ( but big peaces)
133 hz - 18K-22K-24K old and fresh gold - No alloys
5621 hz - All quarats but mostly 22-24 K and OLD gold

Hi!with 8.700 khz and 5.060 khz i detetect a ring ,i think it is a bronze ring

https://ibb.co/dQEWBd
https://ibb.co/hfYV4y

The best frequency for silver and gold 14k it is the 6khz,i have detect with this frequency coins and ring

Hi Taxma,

have you some theory of why the detector (transmitter) is aligned with the object that is detected?

Hi my friend

i do not know why this is happening,
the antenna oscillates 800-900 mhz through a parallel coil with the mobile, a second acoustic frequency at 6khz helps to locate the metal. I do not know how it happens, but it actually happens:)

Hi Taxma,

thanks for answering.

I was asking you because I have seen that you have developed a lot of electronic devices and you have sophisticated measurement instruments.

I have tried to measure variations of magnetic field and electric (static) without "visible" results.

regards

I'm not electronic but I like to make experiment,with this lrl I hsve detect many times valuable precious metals like ring and silver coin with precision.

taxma1981 I have manufactured this device gives a signal to the place of the metal Is it a way to increase sensitivity and thanks[ATTACH]
[/ATTACH]

Hi!increase the volume of the sound in the generator