LongRangeLocators Forums
Page 18 of 23 « First 81617 18 1920 Last »
Show 500 post(s) from this thread on one page

LongRangeLocators Forums (https://www.longrangelocators.com/forums/index.php)
-   Long Range Locators (https://www.longrangelocators.com/forums/forumdisplay.php?f=13)
-   -   Real clone Alonso-PD (https://www.longrangelocators.com/forums/showthread.php?t=18956)

zakari 08-16-2019 09:25 AM
Quote:
Originally Posted by abdou2014 (Post 158004)
it's the TOTEM in the video not alonso pd , and you have a complet project of TOTEM in the forum
Hi abdou how are you my habib friend?
Yes you are right .in the video is totem device
mr mehi tested that and share in the net for the first time
Best regard
zakari

abdou2014 08-16-2019 10:48 AM
i'm fine thanks :)

bureaupro2000@yahoo.com 08-31-2019 06:23 AM
Quote:
Originally Posted by LRLMAN (Post 148440)
I found some spots and one of them is a metal, i don't know what kind of metal it is, but also was detected by a normal metal detector, this is a big object because was detected by a garrett metal detector with a multipliers for depth Garrett Grand Master Hunter CX II

As I said, I can not know what kind of metal is because it is located below a large round planter and I can not destroy it.

And the PD, must be connected the ferrite-omega together.

The only position of omega working how a metal detector.

LRLMAN.
Okay, with this look! But what is the permeability of the coils?

bureaupro2000@yahoo.com 09-06-2019 09:07 AM
Does anyone know the inductance of the ferrite coil?

humhum 09-06-2019 11:12 AM
LC
 
Quote:
Originally Posted by bureaupro2000@yahoo.com (Post 158028)
Does anyone know the inductance of the ferrite coil?

Inductance of the ferrite coil and paralel capasitor to him You will set for around ( the nearest ) Radio station

for example : ( the nearest ) XX Radio station transmitt in 59.941 KHz , now you will set your Receiver coil for him with this calculator.

https://goodcalculators.com/resonant...cy-calculator/

abdou2014 09-06-2019 04:12 PM
you mean we set our LRL near Time signal frequencies ?
and how for those who are very far from Time signal broadcast ?
can we set our LRL on LW radio station ?

humhum 09-06-2019 06:13 PM
Quote:
Originally Posted by abdou2014 (Post 158030)
you mean we set our LRL near Time signal frequencies ?
and how for those who are very far from Time signal broadcast ?
can we set our LRL on LW radio station ?
Yes, if you can receive Radio station with your radio device in your around , for LW if, signal is wery strong also , Yes .

abdou2014 09-06-2019 06:31 PM
I think we do not need stimulation if we have the ability to detect a radio station with our LRL, do you have the same opinion?

humhum 09-06-2019 06:37 PM
Quote:
Originally Posted by abdou2014 (Post 158032)
I think we do not need stimulation if we have the ability to detect a radio station with our LRL, do you have the same opinion?
No , I not think so ,Stimulator is other story .

abdou2014 09-06-2019 06:39 PM
I built a very sensitive LF LRL, I can search with a variable capacitor between 50 and 100 kHz, it captures any station a hundred miles away or very weak electric phenomenon :cool:

abdou2014 09-06-2019 06:41 PM
I know that the stimulator increases the sensitivity, but if your LRL is very sensitive, no need

humhum 09-06-2019 06:50 PM
Quote:
Originally Posted by abdou2014 (Post 158034)
I built a very sensitive LF LRL, I can search with a variable capacitor between 50 and 100 kHz, it captures any station a hundred miles away or very weak electric phenomenon :cool:
But Received signal of any Radio station is only part of PD, after this you will need set many critical adjust with it.
And LW radio signal is with very noisy , it's hard to work on it.

abdou2014 09-06-2019 06:53 PM
not LW , it work 50-100Khz

humhum 09-06-2019 06:56 PM
Quote:
Originally Posted by abdou2014 (Post 158037)
not LW , it work 50-100Khz
You Can be works with it.

abdou2014 09-06-2019 07:04 PM
i have other version with stimulator , it react near ferrite freash gold and silver , and not reaction to iron

humhum 09-06-2019 07:39 PM
Quote:
Originally Posted by abdou2014 (Post 158039)
i have other version with stimulator , it react near ferrite freash gold and silver , and not reaction to iron
Good result , may be works PD .

abdou2014 09-06-2019 07:48 PM
it's new version not yet tested outside , it does not react to the spark, I think it's a disadvantage :frown:

abdou2014 09-08-2019 04:55 PM
is it necessary to work to react a spark ????

humhum 09-09-2019 07:46 PM
Quote:
Originally Posted by abdou2014 (Post 158043)
is it necessary to work to react a spark ????
You test it outside, it will be the most satisfying result.

abdou2014 09-09-2019 08:38 PM
Thank you my friend !!!!

abdou2014 09-12-2019 07:10 AM
I have a problem :frown: , when I bring the stimulator closer to my alonzo receiver the LED goes off , but when i try with my receiver it stay on ,
I think I need a faster stimulator for alonzo receiver ? can you post a schema ?

humhum 09-13-2019 09:40 AM
Which model with Alonso PD you build .

abdou2014 09-13-2019 09:50 AM
The ferrite receiver :

https://ibb.co/Z2nysZ8

abdou2014 09-13-2019 09:53 AM
without coil paralelle capacitor and without stimulator it detect sparck 1.5 battery from 1.2 meter

humhum 09-13-2019 10:11 PM
Quote:
Originally Posted by abdou2014 (Post 158052)
without coil paralelle capacitor and without stimulator it detect sparck 1.5 battery from 1.2 meter
spark from 1 meter is good , but You test it around one buried metal , if you not have so place , You can buried of your garden one precious metal and will wait for many time for test with it. This will be Real Test of your Device.


All times are GMT. The time now is 06:01 PM.
Page 18 of 23 « First 81617 18 1920 Last »
Show 500 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.