OK TRY TO take from any camera the IR cut filter out and repeat the mentioned above you will see your hand glowing from this tiny remote control LED, even though you can use it with your camera as "small night vision" in your room with no light at all. of course the LED OF REMOTE CONTROL IS BLINKING..using this with two or more LEDs with the correct current to feed them and in an angel as the camera system in the drawing I mentioned you will see this picture, adding a filter "from old negative" in the front of your original camera with this IR cut filter removed you will see the buried metal "Aura" from buried metals in the ground, this method is used in a more advanced way to detect mines .as the second picture.

IR band is very very broad, much broader tha human eyes visible spectra. EPR of outer electron shell is very narroaw single line (peak in to the gap), so detecting with classical CCD sensors and currently available IR lens and IR filters is almost impossible task, like finding needle in a haystack. There is a technique in radio encription known as frequency hopping spread spectrum. The halo phenomenon has this self freq.hopping attribute so must be detected using FLL or PLL tehnique because variations of influenced environment's parameters.

In my oppinion solution is reasearch in the longitudinal optics not classical TEM optics.

Yes this is Real , Before years I make Test with my Camera ,but without Removing inside IR Filter , I use from outside special nm IR filter + Software for it and I can See Light from ground to Air from Threasure so like Lantern,Lamp . Method of David Vanuluela.

David Villaneuva's book "The Successful Treasure Hunter's Secret Manual (Discovering Treasure Auras in the Digital Age)" makes some wild claims. All of the examples given in the book are either unverified, or were "verified" with an Electroscope. i.e. one non-working device was used to confirm the results from another non-working device.


The whole concept of treasure auras is complete nonsense based on selective memory, self delusion, and wishful thinking.

ok what this picture prove ??? you can imagine it what ever you want

its ir reflection not penetrating

This only an example of a regular camera with no IR cut filter, adding the filter of 840 or 950 nm with sunlight you can see the reflection of metals on the surface due to temperature differences that alter the emissivity of underground metals. SO some they call it AURA and I think it is just the IR emissivity. that's form the net.

i do own Professional infrared camera i dis assemble it from eye correction device not modified and it has video output with zoom lens HOW EVER you use the camera with infrared diodes you cant see but reflection just no more there is no underground penetrating i just able to see hot pipe in concrete .

AURA and I think it is just the IR emissivity. that's form the net.
aura is just illusions they called it halo too metals wont shine from underground not into any way unless its radioactive

hi all :


this is what we need to understand how the camera work's :



This technique is called: : "Scalar waves" by Tesla :oh:


Check for those links :



https://vdocuments.mx/tesla-shields-...echnology.html


http://www.cheniere.org/books/part4/s43.htm





https://i.ibb.co/R3rVCsv/view-the-inv.jpg



https://i.ibb.co/NCWLTyV/000002.jpg

https://i.ibb.co/w0DVmPR/000003.jpg

https://i.ibb.co/8gjDfr5/000001.jpg



In this way, the wave of mixing 2 rays of IR penetrate the ground and Returns to the camera after its reflection from the metals , hole and things >>





regard's







.

May be is so , but I there in place see Light to sky after process with Software .

IR Beam
 

Also with Two IR Laser Beam , Army finds Explosive from long distance , here in forum
have info and Photos from it .

Tesla used a very large coils with very large power this topic is out of underground imaging

hi all :


without RF or any Additions :


https://youtu.be/UCG-n0ui1ss




this is steel wire 4mm, at 1.75m depth .


----------------------------


https://i.ibb.co/PM5zG33/100870129-2...04826624-n.jpg




----------------------------


regards







.

Dear Mr. Jafal great note, tks .i think this"ll work if and only if

We proof that IR irradiation waves could be absorbed, scattered, and then transmitted to the other side of the wall by the help of other frequency, so one of the ways is to split the beam and then crossing it at a certain point in order to have a higher magnitude of the same wavelength.

it is worth trying to make this experiment with all possibilities in mind. I'll keep this in mind
unless you've done so.

tks again!

Dear DarkMan, good news BUT! i want to ask some questions that could be helpful to you!

are you testing in a well-known place that you already know what is inside?
are you sure that the large thin thing is a metal?

because I noticed a moving shaking long human hair! since and the position of it was at the left side horizontally then while you are filming going to the right that image started to get closer means is getting vertically towards the lens! besides some small object moved, I hope I'm wrong kindly please repeat your video placing a human hair and compare the images!

Glad to see your work,

Hello,
In test by my friend we will send video when it ready

where is the proof ?

Originally Posted by VIEW THE INVISIBLE View Post
Dear Mr. Jafal great note, tks .i think this"ll work if and only if

We proof that IR irradiation waves could be absorbed, scattered, and then transmitted to the other side of the wall by the help of other frequency, so one of the ways is to split the beam and then crossing it at a certain point in order to have a higher magnitude of the same wavelength.

it is worth trying to make this experiment with all possibilities in mind. I'll keep this in mind
unless you've done so.

tks again!

tesla works with electrostatic with very huge power

best wishes Mr. Nicolas to you and your friends.

Well, Tesla's work was done by a few milliamps but millions of volts!

500 mA could stop the heart