Dell Winders
06-13-2017, 01:40 PM
This should dispel all critics objections to MFD LRl's :)
FREE LRL
Treasure Hunters are paying thousands of dollars unnecessarily for Frequency Discrimination, (MFD) Long Range Locator (LRL) when they may already own one. Your Cell (smart) phone, or tablet, makes an excellent Frequency Discrimination LRL.
It's easy. Just download any Free Frequency Generator app to your Cell phone, or tablet.
An example can be found by clicking on one of these URL, and download to your cell phone, or tablet.
https://play.google.com/store/apps/details?id=com.dutchmatic.patone
http://www.szynalski.com/tone-generator/
There are a number of sub harmonic frequencies that can be used to discriminate and detect an element. You can experiment to find the ones that suit you best. I will start you off with a couple of frequencies to experiment with.
GOLD 222 hz
SILVER 335 hz
INSTRUCTIONS: Set the app to your desired frequency with full volume for maximum distance. The volume control can also be used as Weight Check, to compare against a known size test target. Rest your cell phone flat on any object below waist high. Wait 1 minute, and then began your scan using either one, or two L-Rods. Two L-Rods will provide more information about your target. If you already use a swivel handle LRL such as Electroscope, and others you can use it to trace the discriminated Signal line of your Cell phone to the target. DON'T turn the Power Switch of your hand held LRL on. Leave it in the "Off" position.
A lot of information can be gained about a buried target with a Frequency Generator, and a pair of L-Rods, but the secret is in learning to correctly interpret the reactions of the L-Rods. I will be adding 4 pages of instructions using the L-Rods to my own forum later. If I am permitted, I will post the link on TNET forum?
USING L-RODS: this exercise will help to get you started until I can get the instructions posted. I assume you already have, and use a set of L-rods? I know it is cold in Utah, but that is not a problem, you can practice indoors and even go barefooted if you wish..
Place a test target on the floor 10-15 feet from your tablet.
Turn on your FG app and set the frequency, use full volume.
With the L-rods angled inward at the tips, start 10 feet, or more from the potential Signal Line and walk across between the tablet and the test target. When the rods cross, Stop. The invisible Signal Line, should ideally be running from the tablet , thru the front of your heels, to the test target. Watch at what point the Rods begin to cross and learn to stop where the Signal line passes thru the front of the heels.
Don't restrict the rods from crossing . when you start to see a reaction, release physical control of the rods. This will require practice but will come naturally.
Before you start walking again, always open the Rods and reset your walking position.
Forget what you have learned about Dowsing. This is a physics application of the L-rods that you do NOT want to mentally control. Blank your mind and don't anticipate, or expect any reaction. If anything happens, let it happen naturally without conscious thought.
If this is a new learning experience you will enjoy when you start to get results. Relax while practicing. Have fun with it. Dell
REVIEWS:
Thank you Mr. Dell Winders
I downloaded this app, and I tried it. It's work super perfect. It doesn't detect micro particular of quartz or gold. However, my V.R. Omni Series system II detect those nasty micro particular of gold into quartz. I will reset the 555 micro in a proper frequency in order to avoid undesired target.
What I'm going to do is to measure the HZ of the 555 to find out if it work in khz or Mhz. I got a list of frequencies posted by aarthrj3811 on Treasurenet. That list is in Mhz. All depend what is the circumstance I find out in the VR Omni.
Here is a link for Hrz and other conversion.
http://www.theunitconverter.com/.../5044-hertz-to.. Dell
QUESTION: Sir, it is truly amazing that L-rods + free frequency generator,i have tried to target known target and point it correctly...thanks very much...my questions is ,can i point a target without make a noise in my app,how can i know the depth of my target?
ANSWER: Unfortunately, you can't lower the sound on the Cell Phone without lowering the signal strength. I haven't tested other frequencies for comparability with the Cell Phone circuit. What frequencies are you interested in? When I get time I will explain on the forum how to determine target depth. I am glad you are having results with your cell phone. Dell
QUESTION: I have been trying 222Hz..It seems to work perfectly,my other question is how to measure the weight of the target....As u said before 222 HZ is a narrow window for gold...i will be glad to know how to make an easy weight check that can be compatible with my l-rods + smartphone....
At present, my knowledge of Weight Chek, is proprietary and I can't disclose that information. Dell
FREE LRL
Treasure Hunters are paying thousands of dollars unnecessarily for Frequency Discrimination, (MFD) Long Range Locator (LRL) when they may already own one. Your Cell (smart) phone, or tablet, makes an excellent Frequency Discrimination LRL.
It's easy. Just download any Free Frequency Generator app to your Cell phone, or tablet.
An example can be found by clicking on one of these URL, and download to your cell phone, or tablet.
https://play.google.com/store/apps/details?id=com.dutchmatic.patone
http://www.szynalski.com/tone-generator/
There are a number of sub harmonic frequencies that can be used to discriminate and detect an element. You can experiment to find the ones that suit you best. I will start you off with a couple of frequencies to experiment with.
GOLD 222 hz
SILVER 335 hz
INSTRUCTIONS: Set the app to your desired frequency with full volume for maximum distance. The volume control can also be used as Weight Check, to compare against a known size test target. Rest your cell phone flat on any object below waist high. Wait 1 minute, and then began your scan using either one, or two L-Rods. Two L-Rods will provide more information about your target. If you already use a swivel handle LRL such as Electroscope, and others you can use it to trace the discriminated Signal line of your Cell phone to the target. DON'T turn the Power Switch of your hand held LRL on. Leave it in the "Off" position.
A lot of information can be gained about a buried target with a Frequency Generator, and a pair of L-Rods, but the secret is in learning to correctly interpret the reactions of the L-Rods. I will be adding 4 pages of instructions using the L-Rods to my own forum later. If I am permitted, I will post the link on TNET forum?
USING L-RODS: this exercise will help to get you started until I can get the instructions posted. I assume you already have, and use a set of L-rods? I know it is cold in Utah, but that is not a problem, you can practice indoors and even go barefooted if you wish..
Place a test target on the floor 10-15 feet from your tablet.
Turn on your FG app and set the frequency, use full volume.
With the L-rods angled inward at the tips, start 10 feet, or more from the potential Signal Line and walk across between the tablet and the test target. When the rods cross, Stop. The invisible Signal Line, should ideally be running from the tablet , thru the front of your heels, to the test target. Watch at what point the Rods begin to cross and learn to stop where the Signal line passes thru the front of the heels.
Don't restrict the rods from crossing . when you start to see a reaction, release physical control of the rods. This will require practice but will come naturally.
Before you start walking again, always open the Rods and reset your walking position.
Forget what you have learned about Dowsing. This is a physics application of the L-rods that you do NOT want to mentally control. Blank your mind and don't anticipate, or expect any reaction. If anything happens, let it happen naturally without conscious thought.
If this is a new learning experience you will enjoy when you start to get results. Relax while practicing. Have fun with it. Dell
REVIEWS:
Thank you Mr. Dell Winders
I downloaded this app, and I tried it. It's work super perfect. It doesn't detect micro particular of quartz or gold. However, my V.R. Omni Series system II detect those nasty micro particular of gold into quartz. I will reset the 555 micro in a proper frequency in order to avoid undesired target.
What I'm going to do is to measure the HZ of the 555 to find out if it work in khz or Mhz. I got a list of frequencies posted by aarthrj3811 on Treasurenet. That list is in Mhz. All depend what is the circumstance I find out in the VR Omni.
Here is a link for Hrz and other conversion.
http://www.theunitconverter.com/.../5044-hertz-to.. Dell
QUESTION: Sir, it is truly amazing that L-rods + free frequency generator,i have tried to target known target and point it correctly...thanks very much...my questions is ,can i point a target without make a noise in my app,how can i know the depth of my target?
ANSWER: Unfortunately, you can't lower the sound on the Cell Phone without lowering the signal strength. I haven't tested other frequencies for comparability with the Cell Phone circuit. What frequencies are you interested in? When I get time I will explain on the forum how to determine target depth. I am glad you are having results with your cell phone. Dell
QUESTION: I have been trying 222Hz..It seems to work perfectly,my other question is how to measure the weight of the target....As u said before 222 HZ is a narrow window for gold...i will be glad to know how to make an easy weight check that can be compatible with my l-rods + smartphone....
At present, my knowledge of Weight Chek, is proprietary and I can't disclose that information. Dell