New lrl schematic

[taxma1981]

A simple and gut circuit ,in the exit can wie connect the circuit from pd or pdk (thresold detector)
https://s12.postimg.org/53nmvb7fx/15101956_10154963911339396_878512920_o.jpg
:D

[WM6]

More clear view and orientation of your circuit:

http://i63.tinypic.com/1zvbqs7.jpg

[taxma1981]

I forgot,the two pnp it is bc556 and the npn bc337,wie can put enything coils,i want to test a coil like the totem pd ...more clear schematic in two weeks,i am in germany now:)

[abdou2014]

You are brave and generous, it is lacking :)

[taxma1981]

Thanks:)

[abdou2014]

THANK YOU :)

[taxma1981]

Very nice :)

[taxma1981]

The coil 75 turns and 8 cm diameter,
0.5 mm thick,and paralel one 10n capasitor....can wie testet enything coil

[abdou2014]

The potentiometer it can increase the sensitivity or it is for powered ?
and what is the value of last capacitor near exit ?
Thank you .

[taxma1981]

The last capasitor 10 nf ,the potentiometer make all the job:lol:

[taxma1981]

With full power work als transmitter,with low power als receiver,betwenn in the mitte you have a good lrl:D

[zakari]

Thanks alot taxma1981

it seems very nice and interesting

can you explain more about that

power voltage????

[taxma1981]

The problem it is my english,i dont speek gut....the power voltage it is very important,with low power the circuit work als receiver,with full power als transmitter,bettwen full and low power it is the secret

[abdou2014]

It work with 9V Or 12V ?
And follow the diagram as pd or pdk with transistor + NE555 or just NE555 ?

[zakari]

:(:(:(:???:

[taxma1981]

To the exit from circuit connect this schematic with a 100 nf capasitor

https://s18.postimg.org/4s4e0fuvp/20161118_204001.jpg (https://postimg.org/image/4s4e0fuvp/)

[taxma1981]

:(:(:(:???:

This is a transceiver:lol:

[folharin]

cw receptor..

[AurumKid]

Sir taxma its better if you can show us with photo, diagram skech for us to visualize it easily. tnx

[zakari]

To the exit from circuit connect this schematic with a 100 nf capasitor

https://s18.postimg.org/4s4e0fuvp/20161118_204001.jpg (https://postimg.org/image/4s4e0fuvp/)hi taxma 1981
this image not clear .can you put large size pic

and 100nf capacitor is parallel or series?

[taxma1981]

hi taxma 1981
this image not clear .can you put large size pic

and 100nf capacitor is parallel or series?

Hi,100 nf in series....it is from Andreas PD clone

[taxma1981]

The two pnp tranjistor working with 5 volt from one lm7805,the npn tranjistor with 9 volt

[taxma1981]

Wie can use the circuit from franko with the 3 leds and the buzzer(kein problem leute..):lol:

[zakari]

thank you very much taxma 1981

you are gentleman and so clever

best regards:thumb:

[abdou2014]

Is it the same case for Franco 3 leds 100 nF is added between the sensor and the display ?

[taxma1981]

No my friend

[zakari]

hi taxma1981
it seems compress and summery form of pd and new idea of pot application

what's your mean 10-50k pot?

it is 50k pot 10 circle or

rang 10k-50k pot ...for example 20k pot

[taxma1981]

Enything from 10-50 k can you use....

For me better 25 k

[zakari]

Hi taxma 1981

we are waiting
:cheers:

[taxma1981]

Hi :D finish?

[zakari]

hi taxma 1981

what did finish?

your schematic or my glass:D:D

[taxma1981]

:lol::lol:

The schematic

[zakari]

thanks alot taxma1981

I gonna to make your schematic and use with 3led display francoitaly

best regards

[abdou2014]

:)

[abdou2014]

:D

[taxma1981]

You are the best:)

[abdou2014]

The honor is for you :)

[taxma1981]

I thing is gut the circuit,:)

[pigeon]

hi

Is it possible to simplify things and to put a pbc clear to make this project
:)

[abdou2014]

What is not clear ?? :)

[abdou2014]

I enlarged the photo .

[taxma1981]

The second potentiometer from franko lrl?

The buzzer?

The exit from coils for my chematic?

[taxma1981]

I think it is better with a buzzer and 1 led

[abdou2014]

OUT + POT GAIN :)

[abdou2014]

:)

[Arionas]

[Quote = Ζακάρι? 154265] γεια taxma 1981
αυτή η εικόνα δεν είναι σαφής .Μπορεί να βάλετε μεγάλα pic μέγεθος

; και 100nF πυκνωτή είναι παράλληλη ή σειρές [/ quote]


https://s14.postimg.org/gkwjpehxt/image.jpg

[zakari]

hi arionas

please write english

[ban1345]

thanks for project
proteus pcb layout
19873

[zakari]

Hi abdou 2014

it is nice job

is power supply 9v?

[taxma1981]

The 2 bc556 with 5 volt and the bc337 9 volt...

[taxma1981]

wait a few more days, i wait the comprehensive plan by a friend

(Dont make pcb):cool:

[zakari]

Hi taxma 1981

thanks alot for your notification so we are waiting :cheers:

[taxma1981]

The final edition of the lrl,more simply
(PCB WITH GROUND PLANE)

Try different antennas if you want
Diode 1n4148

https://postimg.org/image/tgxruczjz/

[abdou2014]

Thank you very much :)
please the value of this resistor ?
The antenna is always the same or it is in ferrite ?

[taxma1981]

Sorry it is 10 k ,yes with ferrite but can you try with other antennas

[abdou2014]

Ok :)

[zakari]

The final edition of the lrl,more simply
(PCB WITH GROUND PLANE)

Try different antennas if you want
Diode 1n4148

https://postimg.org/image/tgxruczjz/

HI Taxma 1981

I can't connect to this link please upload again please

can you put the image

best regard

[taxma1981]

Look the post 54

[taxma1981]

https://s17.postimg.org/4ap9xs91b/15034213_10154976187929396_1935005753_o.jpg

[zakari]

https://s17.postimg.org/4ap9xs91b/15034213_10154976187929396_1935005753_o.jpg

thank you very much

[taxma1981]

This lrl work better fron othel lrl :D

[indiana jones]

Ziko the schematic is from Savvas ? :)

[taxma1981]

Intiana make this pcb

[abdou2014]

:D

[abdou2014]

:|

[taxma1981]

Perfect

[WM6]

This lrl work better fron othel lrl :D

Sure, but detecting results are deceptive the same way as with other fantasy LRLs.
No doubt, it is good to get some more soldering practice - at more waste components account. Thats is all.

[abdou2014]

https://s25.postimg.org/g9lm1tcr3/Photo_003.jpg

[taxma1981]

https://s11.postimg.org/j3137equn/20161204_175435.jpg (https://postimg.org/image/j3137equn/)
https://s14.postimg.org/3jt0fmw1p/20161205_002917.jpg (https://postimg.org/image/3jt0fmw1p/)
https://s15.postimg.org/456kzg753/20161205_002853.jpg (https://postimg.org/image/456kzg753/)
https://s17.postimg.org/hs7xdx30r/20161205_001909.jpg (https://postimg.org/image/hs7xdx30r/)


With this antenna it is not gut

[abdou2014]

finished :D

[pigeon]

:) good job mabrouk;)

[abdou2014]

THANK YOU :)

[taxma1981]

Gut job my friend:)

[abdou2014]

Thank you friend , please is it to avoid 50 hz ???

[taxma1981]

"if using long ferrite antenna, stub and C trimmer, not necessary"

[abdou2014]

Please ( stub ) ??? what does it mean ?

[reza vir]

Please ( stub ) ??? what does it mean ?

Variable capacitor
http://s8.picofile.com/file/8320436934/40im_1374958017_khazn_tremr.gif

[abdou2014]

Thank you !

[Sreekumar]

Brothers,antenna details ?

[Sreekumar]

Which antenna is suitable for this lrl brothers
Please regards

[abdou2014]

i did lots or modification for this circuit , i found the original circuit and this is modified circuit , i used it to detect VLF broadcast , it's a regenerative receiver :)

[abdou2014]

here's the original circuit , but you must modify the audio and make a display :)

[Sreekumar]

Thank you very much :)
please the value of this resistor ?
The antenna is always the same or it is in ferrite ?

Thank you bro,l"am not electronist ,l build this circuit but problam is antenna,give me this circuit coil and antenna sorry my english

[Sreekumar]

Thank you very much :)
please the value of this resistor ?
The antenna is always the same or it is in ferrite ?

Give me this circuit coil and antenna ?i"am not electronist but i build this circuit problam is coil and antenna

[abdou2014]

it's up to you to choose the coil according to your location , or depending on which band you intend to work on , you can not say give me the antenna characteristics :nono:

[abdou2014]

unless you want to work on the electric or static field, you connect a telescopic antenna or ionic chamber :)

[Sreekumar]

Morgans ionic chamber be used?

[Sreekumar]

Or just connect the antenna?

[Sreekumar]

:|

Transmitter or reciver

[abdou2014]

Morgans ionic chamber be used?

Yes of course .

[abdou2014]

I will give you a tip, if you want an electric or ionic field LRL, Franco or Zahori is better than

this one,

this circuit is good for VLF or LF of VHF, and each band has its configuration, I did all that, I'm

trying to save you time :)

[Sreekumar]

Thank you brother

[Canozkaya]

I will give you a tip, if you want an electric or ionic field LRL, Franco or Zahori is better than

this one,

this circuit is good for VLF or LF of VHF, and each band has its configuration, I did all that, I'm

trying to save you time :)Where is the circuit diagram and pcb? can you upload it again?

[Pahom]

:)Thank you very much :)
please the value of this resistor ?
The antenna is always the same or it is in ferrite ?:)
Excellent scheme!!!!! But this will never find a phenomenon without additions, it is almost Meneiro who understood that topic of regeneration.:)