mineoro special serie 2000

[brasilpb]

http://i64.tinypic.com/148p3b.jpg

[Geo]

Nice try but afraid that there are errors especial at Rx input.

[brasilpb]

yes, it is my doubt also, the coil connected in the transistor collector, and has no current at the base.

[fmnotes]

http://i64.tinypic.com/148p3b.jpg

What model is it?
What ic uses?

[brasilpb]

http://www.electronica-pt.com/db/imagens/TBA820%20I.jpg
TBA820I
http://i63.tinypic.com/10xeuj8.jpg
tda7000

[aft_72005]

Hi brasilpb
nice work !!!!.
can you upload PCB pictures ?

[aft_72005]

yes, it is my doubt also, the coil connected in the transistor collector, and has no current at the base.


it is similar to regenerative mode circuit. ;)

[brasilpb]

http://i63.tinypic.com/1zqf0xt.jpg
http://i66.tinypic.com/98sxso.jpg

[aft_72005]

thank you for pictures . but if you want help for reverse engineering, Not enough.
other thing , is mineoro 2000 really worked ?

[brasilpb]

only works up close, I had to make another receiver to the receiving coil, so it must have something wrong in regenerative receiver, lack of DC voltage at the base of the first BC548.

[Geo]

Short the capacitor 290p and try again..

[enjoykin4]

BrasilPb hello

Particullary mineoro special serie 2000 (http://www.longrangelocators.com/forums/showthread.php?p=152339#post152339) it is a kind of "Static Scalar Detector" - very similar to Signore Franco design.

Can you show us "Bobina receptora" - input coil, and give us some data about, how to wind it. (diameter of wire, number of turns, diameter of windings etc.) ??

Ceramic capacitor of 290pF should be connected in parallel to variabile potentiometer (multyturn) for fine trimming of phase and bias amplitude of oscillating stage T1-BC648.

I don't only understand the role of fixd NF-oscillator 730KHZ in amplitude detector and preamplifier stage.

Reg.
Enjoykin4

[Geo]

BrasilPb hello

Particullary mineoro special serie 2000 (http://www.longrangelocators.com/forums/showthread.php?p=152339#post152339) it is a kind of "Static Scalar Detector" - very similar to Signore Franco design.

Can you show us "Bobina receptora" - input coil, and give us some data about, how to wind it. (diameter of wire, number of turns, diameter of windings etc.) ??

Ceramic capacitor of 290pF should be connected in parallel to variabile potentiometer (multyturn) for fine trimming of phase and bias amplitude of oscillating stage T1-BC648.

I don't only understand the role of fixd NF-oscillator 730KHZ in amplitude detector and preamplifier stage.

Reg.
Enjoykin4

i think it is 130khz...

[Geo]

For all...
Look carefully the audio stages.
They have very interest:cool:.

[enjoykin4]

i think it is 130khz...

Geo any info about 130 KHZ NF frequency ?? :)

Why not 64KHZ or 35KHZ or similar ?? Have you any idea about NF mixing frequency and audio stages ??

Regards
Enjoykin4

[Geo]

Mineoro (Alonso) plays often with frequencies.
Maybe they are looking for frequencies where the noise background is lower....

[Geo]

Nobody not interesting about this strange audio stage;:???:

[WM6]

Only vacuum tube is missing in those audio.

[Geo]

Hahaha.... NO.
Mineoro here try to cutch very "thin" signals.....
It is another "philosophy"....


:)

[Geo]

Any news from brasilpb???
Did you made mod at oscillator???

[brasilpb]

I spoke to the man who sent me the circuit. And he told me, there were two coil in the oscillator circuit. The other coil terminal I connected the collector and the other for the 22k resistor and the oscillator oscillated.

[brasilpb]

http://i67.tinypic.com/2yoec7o.jpg

[Geo]

Thank you.
Do you know the frequency of this oscillator????
I try to understand the usefully of the 130Khz oscillator.

Regards

[brasilpb]

Yes the oscillator, also functions in 130khz. The circuit is type one bfo, metals of close it detect, and the stage of fm functions in 120MHZ.

[Geo]

Ohh yes, very good... a classic Alonso's schematic.
So coil stimulator(555) is for the Rf sniffer!!!

Now all are clean!!!

Thank you.
Regards:)

[Geo]

btw... brasilpb do you know how old is this detector (series 2000)???
Also does the owner found anything with it???

Regards

[brasilpb]

http://cdn2.clasipar.com/pictures/photos/006/434/642/vga_ggg.jpg

Yes the old owner of the device said that already he had found some things with it.

[enjoykin4]

Brasilpb Hi

can you give informations about

1. Bobina Estimuladora
2. Bobina Receptor
3. Bobina connected to collector BC648 and other terminal to 22k resistor and make oscillator oscillating.

Best regards from Russia !! :)
Enjokin4

[enjoykin4]

Ohh yes, very good... a classic Alonso's schematic.
So coil stimulator(555) is for the Rf sniffer!!!

Now all are clean!!!

Thank you.
Regards:)

Geo Hi !!

Geo tell us how NE555 at 1500 Hz can be a RF siniffer ??

What kind of stumulation make NE555 at 1.5KHz ??

Maybe stimulate golden and silver targets make emmiting RF pulses using piezoelectric transducer ??

Best Regards
Enjoykin

[Geo]

http://cdn2.clasipar.com/pictures/photos/006/434/642/vga_ggg.jpg

Yes the old owner of the device said that already he had found some things with it.

Hi.
I lnow the model but i don't know how old is it??? maybe near to 1990....

Regards

[Geo]

Geo Hi !!

Geo tell us how NE555 at 1500 Hz can be a RF siniffer ??

What kind of stumulation make NE555 at 1.5KHz ??

Maybe stimulate golden and silver targets make emmiting RF pulses using piezoelectric transducer ??

Best Regards
Enjoykin

Hi.
555 is not a rf sniffer, it is a coil stimulator. It stimulates the input coil or a round antenna.

[enjoykin4]

Hi Geo

Can you explain from your point of view how this schematic mineoro special serie 2000 (http://www.longrangelocators.com/forums/showthread.php?p=152465#post152465) work at your oppinion ? :)

http://i64.tinypic.com/148p3b.jpg


Any additional info about red round coil antenna and coil stimulation ?

Best regards
Enjoykin4

[Geo]

look here ...


About coil stimulator search for old threads about it and about DCH85.

[enjoykin4]

Thanks signoe Geo !!

I will search for old info and read !!

Do you have any of mineoro LRL's and did you worked with them ?? I want to hear informations from the first source.
..........................................


Geo i have found very interesting informations about "golden signals"

Quote Esteban: " A quantity of metal buried for long time as a treasure directly is energetic, because an open gate of a IC connected via antenna burns in presence of it.... Sometimes the last transistor of audio stage of a common MD burns here...."


This is exactly what Scalar EM waves do in some special circumstances, especialy has repeated in many Tesla experiments. Burn out electronics even have burnt high power components like power IGBT and MOSFET modules for several KAmps and HV impulse capacitors for many KVAR rms power.

About that they can kill many people with easy like was a case from Tesla's life. He had been a witness of one such event - when powerful RADIANT STRIKE killed 18 people in Edison's power station. The cause have been very fast turning high power DC generator - sharp HV nano impulse triggered bluish light rays from the outer surface of HV conductors perpendicular (at 90degree) to direction of conductors. Soon after that special event inTesla's life he started reasearch and experiments with RADIANT in scalar electrodynamics.


I think that "phenomenon" has induced by low level earth's radiant emmision at underground EM lattice of our planet Midgard earth. There exist diurnal variations of radiant emmisions and they were caused by changing vector potential of EM nodes in local EM lattice(s).

For example local humidity is in direct relationship with gradient of vector potential in atmospheric and underground EM lattices. This is one of keys to wather control system - also can be giant weather weapon. Keep in mind that people are also part of the system so any change in earth's vector potential lattice influence human health and mind abilities.

Best regards
enjoykin4

[dragomir]

You probably know about Kirlian images in the field RF. This probably was done in Mindoro. I recently test pulse detector stumbled upon this phenomenon. The device catch my aura with a particular antenna and stronger than metal. This happens when the aura is irradiated with wave with a specific frequency and then becomes visible to the unit.

[enjoykin4]

Geo hi !!

What is exact GOLD FREQUENCY 65KHZ, 32,5KHz, 130 KHz .... or something ??

I suppose (99%) you very nice know the answer on my question !! :)

http://cdn.clasipar.com/pictures/photos/005/764/441/vga_SNV87923.JPG

Best regards
Enjoykin4

[Geo]

Hi.
Brasilpb wrote it!!.
At this version there is only a rf sniffer at 120Mhz.
Bfo at 130Khz don't interest us!!
If you make changes at oscillator then maybe to catch the phenomenon with bfo circuit.

Regards

[Geo]

Thanks signoe Geo !!

I will search for old info and read !!

Do you have any of mineoro LRL's and did you worked with them ?? I want to hear informations from the first source.
..........................................


Geo i have found very interesting informations about "golden signals"

Quote Esteban: " A quantity of metal buried for long time as a treasure directly is energetic, because an open gate of a IC connected via antenna burns in presence of it.... Sometimes the last transistor of audio stage of a common MD burns here...."


This is exactly what Scalar EM waves do in some special circumstances, especialy has repeated in many Tesla experiments. Burn out electronics even have burnt high power components like power IGBT and MOSFET modules for several KAmps and HV impulse capacitors for many KVAR rms power.

About that they can kill many people with easy like was a case from Tesla's life. He had been a witness of one such event - when powerful RADIANT STRIKE killed 18 people in Edison's power station. The cause have been very fast turning high power DC generator - sharp HV nano impulse triggered bluish light rays from the outer surface of HV conductors perpendicular (at 90degree) to direction of conductors. Soon after that special event inTesla's life he started reasearch and experiments with RADIANT in scalar electrodynamics.


I think that "phenomenon" has induced by low level earth's radiant emmision at underground EM lattice of our planet Midgard earth. There exist diurnal variations of radiant emmisions and they were caused by changing vector potential of EM nodes in local EM lattice(s).

For example local humidity is in direct relationship with gradient of vector potential in atmospheric and underground EM lattices. This is one of keys to wather control system - also can be giant weather weapon. Keep in mind that people are also part of the system so any change in earth's vector potential lattice influence human health and mind abilities.

Best regards
enjoykin4

Hi.
I have worked with many Mineoro's LRLs.
First i had a PDC210 without success.
After it, i worked with a DCH85 with some success some times.
Later i worked with a DC2008 and a FG80 without results. Finally i constructed a FG80 and i modified it, so now it works ok if there is long time buried object.
With it a friend found about 500 silver coins from 30+ meters. Signal was very strong and the lrl burned the power supply when the lrl was about 3..4 meters far from the coins.

Regards

[enjoykin4]

Hi.
I have worked with many Mineoro's LRLs.
First i had a PDC210 without success.
After it, i worked with a DCH85 with some success some times.
Later i worked with a DC2008 and a FG80 without results. Finally i constructed a FG80 and i modified it, so now it works ok if there is long time buried object.
With it a friend found about 500 silver coins from 30+ meters. Signal was very strong and the lrl burned the power supply when the lrl was about 3..4 meters far from the coins.

Regards


Thank you Signore Geo

You are the most experienced gold hunter here. !! :)

Would you like to share with me (for my own use) your modified schematic of Mineoro FG80. In a Russia there are many Kurgans with a lot of ancient treasury gold. Honestly I want to open one of them !!
https://upload.wikimedia.org/wikipedia/commons/thumb/5/51/LYablonskyFilipovkaKurganR1.jpg/262px-LYablonskyFilipovkaKurganR1.jpg
Best regards
Enjoykin4

[enjoykin4]

My email
enjoykin4@yandex.ru

[Geo]

Hi.
It is not so simple. Next month i start works at farm so no time to help you.
Begin with the xtal version of Franco and when you make it to work then you can make the next step.
But first you must find a place where exists the phenomenon.
Without it all lrls are scrap....

Regards:)

[enjoykin4]

Hi Geo

I have not asked for help but for your schematic of mineoro FG80 (modified or unmodified). I think that schematics of all working LRLs should be in public domain - so everyone who want can make it for personl purpose.

Whom belong the Sun ?? Air ?? Water ??
Not so long - before 200 years ago main currency all around the world had been gold, silver. Biggest question now is: WHERE IS NOW ALL THAT GOLD ?? In american federal reserve sure not !! In Russia not !! In China not !! It is a giant ammount of gold !! And where is a silver ?? That question is for public investigation !!.

What is purpose finding 10 tonn of gold or diamonds and change it to unvaluable papers like is US.$. Jewish federal reserve can print as many unvaluable papers as they like and change all that unvaluable paper for your GOLD or DIAMONDS.

Something BIG SMELL HERE !! Got it ??


In Jewish snake bankers THEY TRUSTED !!
http://www.gradremstroy.ru/wp-content/uploads/2009/12/dollar-burning_jpg-convert.jpg


ps: I already have made 5 Franco's Quartz LRL (known as Phantom) and 4 PLL4046 LRL and still make experiments. I want to help Signore Franco to make perfect LRL bu he is busy. The reason you know very nice.

Now I have many ideas how to improve his design (or any other design) even more , how to make LRL discrimination. Real problem with PHENOMENON is in that PHENOMENON have not ElectroMagnetic nature. It is a another kind of field which is real and exist belive somebody in him or not - knowing somebody about it or not !!

PHENOMENON doesn not depend from humans will - it is a FORCE like many other forces in universe.

Phenomenon (Scalar field) had been discovered by Serbian scientist Nikolai Tesla before more than 100 years (I think 1894) ago and he had explained Scalar nature in his only book but that only one book which Tesla wrote had been banned for public. Guess who banned it and who promote Jewish Scientist called Albert Einstain (typical Jewish trick - masked under German's name and nickname) to make his rubbish Theory againt Tesla and Aether. !!

I suppose that Tesla's work is now in deepest hidden vault among with other more than 6500 discoveries banned by american governement (real data from very known american scientist - not my imagination. Vault is real, exist and still in use today. Position of vault is right bellow small, popular fishing town SAUSALITO - near the San Francisco.

Unfortuanately same kind of story worth for Russia where are in law Jewish Levits HASIDS - not pure Russians like for example me. End of story !!!!.

OK everybody on his own !!

Best regards
enjoykin4

[Geo]

Hello.
We can start at end of Octomber when i will finish my jobs...
Until Octomber.... please experiment with Xtal version. I am sure that you will see many strange things....

Regards:)

[enjoykin4]

Hello Geo

OK Geo how do you wish . You can join us whatever time you want !! :)

Meanwhile i will just now open a new public thread

FrancoItaly LRLs considerations and discussions

http://www.longrangelocators.com/forums/showthread.php?p=152531#post152531

in main thread All-Electronic LRLs.


Purpose is clear.

Quote FrancoItaly (http://www.longrangelocators.com/forums/member.php?u=691) Guru
Join Date: Feb 2006
Location: Liguria, Italy
Posts: 555
http://www.longrangelocators.com/forums/images/icons/icon1.gif Hi All
The purpose of this forum is to understand the functioning of Lrls e each of us can contribute with his experience and his ideas. I can understand that those who have achieved a working LRL does not want to make it public and wants to exploit on its own and does not want the LRL is commercially exploited by others. I myself before posting my LRL with all the details I have thought long and hard but in the end I thought I had to repay to this forum and all the members who have made ​​a contribution. Morgan, Andreas, Geo and others have also made ​​contributions without disclosing the details. The fact that Andreas has managed to obtain the discrimination of gold is still a big help for us, even without knowing the details. The fact that many of us have built a working LRL is an incentive for those who still failed and is evidence that the phenomenon is real. Unfortunately, in this field you need a good knowledge of electronics and a good equipment, you can not expect a complete scheme operating at the first shot, experimentation is the rule. Even in the diagrams I posted a small change can lead to a malfunction.

Best Regards

[Geo]

Hi Brasilpb.
Can you tell me where are connected the 2 switches for the discrimination??

:)

[brasilpb]

http://i63.tinypic.com/28hhkrp.jpg

[Geo]

Thank you:)

[enjoykin4]

http://cdn2.clasipar.com/pictures/photos/006/434/774/vga_ggg.jpg

Geo have you infromations about the Mineoro 2000 coils and would you like share with us ??

Cooplanar type or omega type ?? Number of windings ?? diameter of windings, diamete of wire(s) ?? Direction of windings ?

What about small stimulus ferrite coil ? Any info anout mag.permeabiity, number and diameter of windings and of course direction of winding turns. Maybe partnered coil configuration ??

Best regards
enjoykin4

[Geo]

Hi.
From what i know there is not any omega or coplanar or ferrite coil.
Mineoro 2000 is a DCH85 detector with some mods.
At old DCHs there was a simple coil (one open turn) for the receiver, one coil (one open turn) for the rf sniffer (TDA7000) and one coil for coil stimulator. Also there was a one turn coil tuned with 150pf capacitor (as filter). You can search forum for everything about DCH and will understand everything about this detector.

Regards

[Geo]

Brasilpb, i have a question about coils for discrimination.
I don't believe that can make any discrimination but any way.....
The switch is a 2p3ts type so if you see at schematic that i attach at position 1 it closes the terminal 2 with 1, at position 2 it closes the 2 with 3 and at position 3 it closes 2 with 4.If so then position 2 and 3 are the same, no difference because coils are the same. Except if uses a different type of switch. Please can inform me???


Regards

[brasilpb]

http://i64.tinypic.com/vo7nh4.jpg

http://i66.tinypic.com/i5ndqs.jpg

[Geo]

OK, thanks.
:)

[enjoykin4]

Hi.
From what i know there is not any omega or coplanar or ferrite coil.
Mineoro 2000 is a DCH85 detector with some mods.
At old DCHs there was a simple coil (one open turn) for the receiver, one coil (one open turn) for the rf sniffer (TDA7000) and one coil for coil stimulator. Also there was a one turn coil tuned with 150pf capacitor (as filter). You can search forum for everything about DCH and will understand everything about this detector.

Regards

Thank you Geo !! :)

Valuable informations !!

It seems to be some very tiny signal hunter at particular frequency. Very narrowband.


ps: about so called Mineoro Ionic chamber - for some of their detectors i think it work as Nano-Pulser (generator) with extremely law duty cycle. To catch such very sharp rising times (canbe in pico second domain) you need have some of 1GHz oscillograph bandwidth.

By the way this Mineoro "Ionic chamber" is very similar to Nikolai Tesla Spark-Gap controller and also with Edwin Gray tube (as main part of his Free Energy generator).
http://i10.pixs.ru/storage/5/2/4/Mineoroion_5607913_20761524.jpg

ps: I have not worked with any of Mineoro detectors.South american technology is unknown to me....

Best Regards :)
Enjoykin

[Geo]

Hello brasilpb.
For the discrimination there is another one selector.
Can you tell me where is connected???

Thank you

[brasilpb]

http://i65.tinypic.com/30a9n2e.jpg

in this version, that you postou, it must be the key to bind.
https://www.youtube.com/watch?v=LIfACSTQFT0

[Geo]

Sorry my mistake.
On the head there are 2 switches, one that changes the 3 coils and one yet. What it makes the other switch??

Regards

[brasilpb]

In my it only has a key, of the discrimination, and a key to test the stacks, power and off in the potentiometer.

[Geo]

Thank you:)

[enjoykin4]

Hola brasilpb


informations about

1. Bobina Estimuladora
2. Bobina Receptor
3. Bobina connected to collector BC648 and other terminal to 22k resistor and make oscillator oscillating.

Dont talk ?? The reason ??

[Bill512]

http://i63.tinypic.com/28hhkrp.jpg


Hi brasilpb,
these small "antenna" coils ,are connected somewhere in the PCB or not???

[brasilpb]

They do not have no linking in the circuit.

[Bill512]

They do not have no linking in the circuit.

so, it's one of those RF related loops, which they often use in mineoro's.
Thanks for the answer brasilpb.

[Geo]

so, it's one of those RF related loops, which they often use in mineoro's.
Thanks for the answer brasilpb.

No, i"ll contact and inform you.

:)

[gaucho1961]

Hello friends,
What chip is this with a red circle ??
Does anyone in the forum know how to identify it ??
Or give some opinion or suggestion based on the scheme of this circuit.
Thanks to all who can help me.
.

20202

[Geo]

If you interesting to construct it, you can make an oscillator at the same frequency (555. 4011 etc) and connect it to 4k7 resistance.

[gaucho1961]

If you interesting to construct it, you can make an oscillator at the same frequency (555. 4011 etc) and connect it to 4k7 resistance. I am grateful for the attention.
I want to try to set up and see how this detector works.
I'll try some of these ICs, I hope it works.
But also I will be waiting for someone who knows that mysterious CI may appear.
Thank you my friend.

[GOLDEN LILLY]

What is the function of the other 555?

[Geo]

There are 3x (555).
One is for audio (buzzer driver), one for battery test (i think) and the other is for coil stimulator.

[humhum]

Hi Geo , I think One is for audio (buzzer driver), other Two are for Stop of Stimulator Transmitter with (S) Button Controller ,(maybe will works only so like Passive Receiver). :D

[Geo]

Yes you have right.
With the existing values the 555 gives a pulse of 110sec and turn on the 2 transistors.
Nice observation :thumb:

[Geo]

If i remember good... it is for pinpoint when the signal is very strong.
But i don't think that we will locate so strong signal with this device ...:lol::lol:

[humhum]

Yes you have right.
With the existing values the 555 gives a pulse of 110sec and turn on the 2 transistors.
Nice observation :thumb:

Geo I write Wrong for works of 555, because Coil Stimulator works only if "S" button is pres.

[humhum]

If i remember good... it is for pinpoint when the signal is very strong.
But i don't think that we will locate so strong signal with this device ...:lol::lol:


Yes , Pinpointing olny with inside BFO circuit and with minimum sensitivity so like MD. :)

[humhum]

so, it's one of those RF related loops, which they often use in mineoro's.
Thanks for the answer brasilpb.

Yes, You are Right Bill about Disc. My Two Version home made Mineoro works with same logic . ;)

[GOLDEN LILLY]

What is the receiver coil used in DCH85? Please show some pictures...

[gaucho1961]

Hello friends.
I would also like some more information on this coil, I would like to know how many turns of wire are. The main coil seems to have about 90 turns with a central outlet, would that be it ?? Has anyone else undone this coil to count the turns? Has anyone done the measurement with a multimeter or indutometer? Help me.

[reza vir]

If you interesting to construct it, you can make an oscillator at the same frequency (555. 4011 etc) and connect it to 4k7 resistance.

Hello geo
This is not the 4011
I checked out the pins
For example, pin 8 has a connection
But it does not work

[reza vir]

4000 series pin out

https://www.dummies.com/wp-content/uploads/311298.image0.jpg

[abdou2014]

For all...
Look carefully the audio stages.
They have very interest:cool:.

Are there any errors in the TBA820 circuit and the Audio circuit ???

[abdou2014]

I noticed when the receiver is set at the beginning of the led lighting, and that I turn on the stimulator, the LED goes off and gives me the posibility to increased sensitivity .
usually when the emitter turns on the led light and not make it off ???

[abdou2014]

and this result requires an accurate adjustments of frequency and duty cycle ,

[abdou2014]

I hope someone tells me if it's a good result or a mistake .

[Geo]

Are there any errors in the TBA820 circuit and the Audio circuit ???

No (as i see it...)

[abdou2014]

Thank you Mr Geo , I noticed that the mixing with the big coil prevents the capture by infrared,
I do not use yet the stage TBA and audio posted here, I used an audio transformer with the beep generator, it works well but even by decreasing the sensitivity the led flashes very slowly and dont off.

[abdou2014]

Mission accomplished, very stable, very sensitive, there are errors on the diagram, capture of spark from a lighter at 6 meters :cool::cool::cool::D:D:D

[shahrayar]

Mission accomplished, very stable, very sensitive, there are errors on the diagram, capture of spark from a lighter at 6 meters :cool::cool::cool::D:D:D

F?licitations, mon fr?re
A pr?sent? le programme sur lequel mon fr?re a travaill?, je veux le faire

[abdou2014]

you had several requests from me to team up with me and you refused :nono::nono::nono:
I am your old friend , Mr Benslaman :lol::lol::lol:

[abdou2014]

No reaction to electricity or tv and other household appliances even by reproaching very close
it reacts only to the spark and at a great distance .

[shahrayar]

you had several requests from me to team up with me and you refused :nono::nono::nono:
I am your old friend , Mr Benslaman :lol::lol::lol:
when was that?
HAKIM ALGERIAN

[Pahom]

Chuyka for a spark ... this is an indirect indicator .....

[abdou2014]

when was that?
HAKIM ALGERIAN

My name is not HAKIM, it's just a pseudonym, when you called yourself (mimou, chayrayar, na3nou3, adam, vali) :lol::lol::lol:

[abdou2014]

Chuyka for a spark ... this is an indirect indicator .....

Yes this is the secret , the spark generate ......... field ?????

[Pahom]

My name is not HAKIM, it's just a pseudonym, when you called yourself (mimou, chayrayar, na3nou3, adam, vali) :lol::lol::lol:

Wow all around spies .....:прохладный:

[abdou2014]

007 :cool:

[shahrayar]

The name (Naanoua) from where I got it is known only to one person:angry::razz::lol:

[shahrayar]

007 :cool:

Put the chart or I tell everyone who you are:(
You spy with another membership:lol::lol:

[kostas87]

Hi.
Brasilpb wrote it!!.
At this version there is only a rf sniffer at 120Mhz.
Bfo at 130Khz don't interest us!!
If you make changes at oscillator then maybe to catch the phenomenon with bfo circuit.

Regards

Hi !!
what changes is needed to the bfo oscillator to catch the phenomenon?

[Geo]

Hi Kosta!!.
You must modify the level of bfo signal.
I NEVER tried it, i speak theoretically!!!

[kostas87]

Hi Kosta!!.
You must modify the level of bfo signal.
I NEVER tried it, i speak theoretically!!!

Thanks GEO!
I will try something this winter, theoretically in the first stage I will make a bfo with crystal cd 4023, in the second stage I will add a signal amplifier and in the last stage I will make the audio with a lm 380 that detects both frequency and voltage dc in the sound signals. and of course I will add a stimulating coil. ;)

[Geo]

If winter is heavy.... yes:lol:

[kostas87]

Hello friends,
What chip is this with a red circle ??
Does anyone in the forum know how to identify it ??
Or give some opinion or suggestion based on the scheme of this circuit.
Thanks to all who can help me.
.

20202

Hi gaucho! It's the (NTE 74C14)

[kostas87]

look here ...


About coil stimulator search for old threads about it and about DCH85.

Geo ...if the receiver is correct it is not a bfo detector for metals but for cw and ssb.

[abdou2014]

I NEED SOME DERTAILS PLS HELP
DIAMETER OF THE COIL AND WIRE ( BLUE AND RED )

[Geo]

I NEED SOME DERTAILS PLS HELP
DIAMETER OF THE COIL AND WIRE ( BLUE AND RED )

Wire of loop is 2.5mm^2 and the wire of potcore is 1mm diameter but i think is not critical

[aft_72005]

http://i64.tinypic.com/148p3b.jpg




Hello... This circuit is not displayed.. Does anyone have the circuit to re-upload it?
Regard