metal frequency (my test)

[iam_7up_gamer]

Hello to all lrl loves,
Yesterday i test and selected nice and real frequency of metal . This frequency work with passive system.

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)

If your have other frequency put here

[FrancoItaly]

Hi iam_7up_gamer,

The passive receiver works with ferrite coil?

There is a trasmitter coil?


Regards

[iam_7up_gamer]

No diffrent , ferrit, coil , radio fm , loop antenn and ....
I test this frequency with conic coil and variable cap in field and real buried item

[FrancoItaly]

Well, if you do not want to say more, we take note that you have made a LRL with discrimination and on my part I will not ask more.

[iam_7up_gamer]

I answer any question my friend

[iam_7up_gamer]

Franco you problem is ballance betwen tr and rx , yes ?

[FrancoItaly]

Okay, but it does not change, we know that your LRL is sensitive and discriminates gold, also we have a vague idea of the operation at this point I think there is nothing more to add.

[iam_7up_gamer]

Before i have same problem of you , the way is easy , you must work about resonant stimulate not reflex betwen rx and tx , you understand ?

[Nicolas]

Thank you for your efforts you are in the right way
God willing, I will add some frequencies to other metal here.
Now I don't remember it exactly.

[iam_7up_gamer]

Of course , i create this post for share info about metal frequency for bettet result , you know frequency is very very important , later i put here frequncy ballance betwen ir led and radio fm for detect metal buried ,

[Nicolas]

Thank you for your efforts you are in the right way
God willing, I will add some frequencies to other metal here.
Now I don't remember it exactly.


For my test For my LRL KING V3.1 RX / TX

Void 500 ---1700
Aluminum 31900
Silver 43300
Diamond 49200
Copper 58600
Gold 59000 --- 59600
Lead 65000

[iam_7up_gamer]

good . void center detect only with 700 . you take 500 -1700 with coil ?

[brs]

We understand from this that the frequency of fresh gold is 59khz or is 59.5khz or be 130 khz

[Bill512]

Hello to all lrl loves,
Yesterday i test and selected nice and real frequency of metal . This frequency work with passive system.

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)

If your have other frequency put here
Hi,
this frequency table is for use on pure electronic locators , or is intended for L- rods type?

[iam_7up_gamer]

Hi. No my friend high frequency like 59 khz have very harmonic which not good for lrod , for l rod you must use low frequency like 5 khz , because low frequency is exact and high frequeny is strong

[iam_7up_gamer]

We understand from this that the frequency of fresh gold is 59khz or is 59.5khz or be 130 khz
This ia resonant story , fresh gold detect with 5khz , 59 khz , 59.5 khz , 62 khz , 133 khz , 258 khz , 1.3 mhz , 13 mhz ,17 mhz, and giga rang

[Nicolas]

this is my first test for gold since 2010
the frequency for Gold is 59.000 to 59.889 HZ
you can look it here good mode slowly

https://www.youtube.com/watch?v=X7WN3NJFFdY

the frequency 62khz i think is not stable. but 59.000 and 60.000 Hw yes and so better

[Nicolas]

Hi,
this frequency table is for use on pure electronic locators , or is intended for L- rods type?

This is tested by me at my lRl's dear friend

I have 6 frequency selectetd by a selector.

Bronze for me is not 62.000 but 56.300
look at my viedo you can understand good

[iam_7up_gamer]

yes bronze not detect with 62 khz . in my lrl 55 khz is so good . with 55 khz detect from 20 meter and with 595 khz detect from 150 meter

[goldfinder]

[QUOTE=iam_7up_gamer;151446]Hello to all lrl loves,

All metal 62 khz(no bronze)
All metal 130 khz (no iron , tin ,lead)
Just gold and some time cooper 59,5 khz
Iron 72 khz
Just bronze 55 khz
All metal 258 khz (complex for work)


I have studied this frequency thing of metals for some time. These frequencies fit with
theory and are harmonics or close to yours.
Here are other frequencies, plus or minus some variable factor, that come out of my research. You will note for example that your silver frequency is a subharmonic of mine.
Gold 50 khz
Silver 85 khz
Lead 4.25 khz

Many dowsers use numbers that are like those of mine above. When they do this it is pure mental dowsing. For example they come up with 5 KHZ. If there was a frequency like crap for gold, put crap in the machine and the dowser would find it.

Many of frequencies come from poorly tuned machines that the frequencies are way off because their measurement machines and signal generators are lousy.
GF